SERIES 90-30 DIETZ

90 MICRO24VDC

POWER SUPPLY PWR325 24/48 VDC 30 WATTS

ANALOG INPUT; CURRENT; 4 CHANNELS

IC693NDL645 MODULE 24-VOLT DC POSITIVE/NEGATIVE LOGIC INPUT

12/24VDC OUTPUT (075 AMPS PER POINT) MODULE 32 POINT THE MODULE REQUIRES A TERMINAL BLOCK (IC694TBB032 BOX STYLE OR IC694TBS032 SPRING CLAMP STYLE TERMINAL BLOCK) TERMINAL BLOCK IS SOLD SEPERATELY OUTPUT RESPONSE TIME IS 05MS

IC693CBL327 SÉRIE 90-30; CÂBLES; CÂBLE; CÔTÉ GAUCHE; UN CONNECTEUR 24 BROCHES À 90 DEGRÉS; 3 MÈTRES.

HAND HELD PROGRAMMER FROM GE AUTOMATION.

GE FANUC 0.5 AMP POSITIVE LOGIC OUTPUT MODULE

RACK EXTENSION 10 SLOTS IC693CHS392

CPU MODULE240K USER MEMORY

POWER SUPPLY MODULE 120/240VAC 125VDC SERIES 90-30

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

GE FANUC SERIES 90-30 CPU MODULE WITH SERIAL PORTS

REMOTE FIP INTERFACE MODULE

CABLE ORIENTÉ COTÉ DROIT DU MODULE (GE-IPS) AVEC CONNECTEUR À 24 BROCHES À 90° ET TENDEUR LONGUEUR: 2M PROFONDEUR: 2 POUCES. NUMERO DE SÉRIE: 90-30 COURANT: 1;2 A

PROGRAMMABLE COPROCESSOR MODULE; 192 KBYTE (47 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE)

IC693MDL240E

5 SLOTS I/O RACK; EXPANSION

IC693PWR331 POWER SUPPLY 30 WATT 24 VDC NOMINAL INPUTS HIGH CAPACITY

CPU MODULE240K USER MEMORY

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

120/240VAC 125VDC 30W STD

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

GE FANUC 8 ISOLATED RELAY OUTPUT MODULE 24 VOLTS DC OR 120/240 VOLTS AC

ANALOG OUTPUT; CURRENT; 2 CHANNELS

12/24 VDC 0;5A 16PT NEG

OUTPUT MODULE; ISOLATED RELAY; NO; 4 AMP; 8 POINT

MICRO PROG. CONTROLLER

BASE WITH 10 SLOT TURBO CPU IN BASE .6MSEC 12K

GE FANUC SERIES 90-30 CPU MODULE WITH SERIAL PORTS

CABLE; RIGHT SIDE; ONE – 24 PIN 90 DEGREE CONNECTOR; 3 METER.

2 TWO-AXIS POWER MATE APM (PM-APM) IS A TWO AXIS MOTION CONTROL MODULE THAT IS HIGHLY INTEGRATED WITH THE LOGIC SOLVING AND COMMUNICATIONS FUNCTIONS OF THE IC693 PLC. TWO PRIMARY CONTROL LOOP CONFIGURATIONS ARE PROVIDED; STANDARD MODE AND FOLLOWER MODE

POWER SUPPLY 120/240VAC 125VDC 30W STD

PROGRAMMABLE COPROCESSOR MODULE; 640 KBYTE (190 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE

POWER SUPPLY PWR325 24/48 VDC 30 WATTS

ANALOG INPUT; CURRENT; 16 SINGLE CHANNELS

OUTPUT; 0.5 AMP (16 POINTS)

IC693BEM331G CONTROLLER MODULE D EXTENSION SERIES 90-30 GENIUS BUS

I/O MODULE; DISCRETE; 32 POINT; DC OUTPUT; 12/24VDC POSITIVE LOGIC

POWER SUPPLY PWR325 24/48 VDC 30 WATTS

2 TWO-AXIS POWER MATE APM (PM-APM) IS A TWO AXIS MOTION CONTROL MODULE THAT IS HIGHLY INTEGRATED WITH THE LOGIC SOLVING AND COMMUNICATIONS FUNCTIONS OF THE IC693 PLC. TWO PRIMARY CONTROL LOOP CONFIGURATIONS ARE PROVIDED; STANDARD MODE AND FOLLOWER MODE

IC693CHS399 SERIES 90-30 5-SLOT REMOTE EXPANSION BACKPLANE

120/240VAC 24/48VDC 30W STD

GE FANUC SERIES 90-30 CPU MODULE WITH SERIAL PORTS

PROGRAMMER HAND HELD SERIES 90-30

PROGRAMMABLE COPROCESSOR MODULE; 640 KBYTE (190 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE

BASE WITH 10 SLOT TURBO CPU IN BASE .6MSEC 12K

BASE WITH 10 SLOT TURBO CPU IN BASE .6MSEC 12K