SIMATIC HMI LEUKHARDT

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; PROFIBUS DP 12; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE; WINDOWS EMBEDDED STANDARD 2009 PREINSTALLED; WINCC FLEXIBLE RT 512 PT (INCL. ARCHIVES AND RECIPES)

TM1 KEYPAD FOR OP20/240-8 AND MR20

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800 X 600; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE2SOLO 1.2 GHZ; PROFINET(IE); 2 X 1GBIT; PROFIBUS DP 12; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; 50 GB SOLID STATE DRIVE SATA (HIGH ENDURANCE); WINDOWS XP PROF. MULTI-LANGUAGE PREINSTALLED ON SSD; W/O SIMATIC SOFTWARE

CONNECTOR; FEMALE; 2-PIN; 24 V DC FOR SIMATIC HMI PANELS; EXCEPT KEY PANELS; WIRE CROSS-SECTION MM2 UP TO 0.75 AMOUNT: SEE TECHNICAL DATA

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WIT

SIMATIC HMI KP1500 COMFORT; COMFORT PANEL; KEY OPERATION; 15" WIDESCREEN TFT DISPLAY; 16 MILLION COLORS; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 24 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; CONFIGURABLE FROM WINCC COMFORT V11 SP2 PHASED-OUT PRODUCT - REPLACED BY 6AV2124-1QC02-0AX1 CONFIGURABLE FROM V14 SP1

SIMATIC HMI; KTP1200 BASIC; BASIC PANEL; KEY/TOUCH OPERATION; 12" TFT DISPLAY; 65536 COLORS; PROFINET INTERFACE; CONFIGURABLE FROM WINCC BASIC V13/ STEP 7 BASIC V13; CONTAINS OPEN-SOURCE SOFTWARE; WHICH IS PROVIDED FREE OF CHARGE SEE ENCLOSED CD

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 12" TACTILE; 800 X 600 ; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CELERON M 1;2GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 4 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 512 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 15" TOUCH; 1024 X 768; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EUROPE; CELERON P4505 (2C/2T; 1.86 GHZ; 2MB CACHE); PROFIBUS/MPI (CP5611-A2 COMPATIBLE); 2 MB BUFFERED SRAM; 1 GB DDR3 1066 DIMM; 250 GBYTE HDD SATA; W/O OPTICAL DRIVE; 2 X PCI FREE; WITHOUT OPERATION SYSTEM; WITHOUT EXPANSIONS (SW)

STARTER KIT TP700 COMFORT; CONSISTING OF: TP700 COMFORT; WINCC COMFORT (TIA PORTAL); PROFINET-CABLE FOR TESTING; SIMATIC HMI MEMORY CARD 2 GB 10 PROTECTIVE MEMBRANES

STARTER PACKAGE TP 177MICRO COMPRISING: TP 177MICRO; WINCC FLEXIBLE 2008 MICRO; MPI-KABEL FOR TESTING; SIMATIC HMI MANUAL COLLECTION (GER; EN; FR; SP;IT) CONTAINING ALL AVAILABLE MANUALS

STARTER PACKAGE 277 DP PLUS; COMPRISING: MOBILE PANEL 277 W. INTEGR. ENABLING BUTTON; EMERGENCY-STOP BUTTON; HANDWHEEL; KEY SWITCH AND ILLUMINATED PUSHB. UNIT; CONNECTIVITY BOX DP PLUS; CABLE DP 10 M; WALL BRACKET; WINCC FLEXIBLE STANDARD 2008; SIMATIC HMI MANUAL COLLECTION

SIMATIC HMI; MOBIC T8; ENGLISH BASIC PACKAGE CANNOT BE ORDERED SEPARATELY; EMITTED INTERFER. CLASS A; WINDOWS CE ENGLISH

SIMATIC PC; MOTHER BOARD CORE2 SOLO 1;2GHZ PROFINET IE; FOR SIMATIC HMI IPC477C

SIMATIC HMI IPC677C (PANEL PC); 2X ETHERNET 10/100/1000 MBIT/S ; 4X USB V2.0; 1X EN SÉRIE (COM1) ; CHIEN DE GARDE; SURVEILLANCE DE LA TEMPÉRATURE ET DE VENTILATEUR; CONTRÔLEUR RAID INTÉGRÉ ; TOUCHES 15" ; 1024X 768 AVEC INTERFACE USB BLOC D'ALIMENTATION 110/230V CA AVEC NAMUR; CÂBLE D'ALIMENTATION EUROPE CORE I3-330E (2C/4T; 2;13 GHZ; HT; VT; 3MO CACHE) 3 GO DDR3 1066 DIMM; DISQUE DUR SATA 250GO DVD+-R+-RW; 2X PCI LIBRES WINDOWS XP PROF. SP3 MUI (DE; EN; FR; ES; IT) SANS EXTENSION (LOGICIEL)

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 SOLO 1;2 GHZ; PROFINET (IE); 2X 1GBIT; PROFIBUS-DP 12 1 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 4 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 2048 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" KEY; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE I7-610E (2C/4T; 2.53GHZ; TB; HT; VT; 4 MB CACHE) 4 GB DDR3 1066 DIMM; 250 GB HDD SATA WITHOUT OPTICAL DRIVE 2X PCI FREE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE)

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" KEY; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE I7-610E (2C/4T; 2.53GHZ; TB; HT; VT; 4 MB CACHE); PROFIBUS/MPI (CP 5611-A2-COMPATIBLE); 2 MB BUFFERED SRAM 8 GB DDR3 1066 DIMM; ECC; RAID1 2X 320 GB SATA (2.5"); (MIRROR DISKS) DVD+-R+-RW; 2X PCI FREE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" KEY DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS XP PROF. MULTI-LANGUAGE PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WINCC FLEXIBLE RT 512 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIEL (COM1); WATCHDOG; SURVEILLANCE DE TEMPERATURE ET DU VENTILATEUR; CONTROLEUR RAID EMBARQUE; 15" TOUCH; 1024 X 768; AVEC INTERFACE USB EN FACADE; ALIMENTATION 24V CC; CORE I3-330E (2C/4T; 2;13GHZ; HT; VT; 3MO CACHE); 2 GO DDR3 1066 DIMM; SOLID STATE DRIVE SATA 50 GO (SLC); DVD+-R+-RW; 2 X PCI LIBRE; SANS SYSTEME D'EXPLOITATION; SANS EXTENSION (LOG.); OPTION SSD 50 GO N'ETANT PLUS DISPONIBLE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT WITH 8 GB CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 80 GB SOLID-STATE DRIVE SATA (STANDARD) WINDOWS XP PROF. MULTI-LANGUAGE PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" KEY; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CELERON P4505 (2C/2T; 1.86 GHZ; 2 MB CACHE); PROFIBUS/MPI (CP 5611-A2-COMPATIBLE); 2 MB BUFFERED SRAM 1 GB DDR3 1066 DIMM; 250 GB HDD SATA DVD+-R+-RW; 2X PCI FREE WINDOWS XP PROF. SP3 MUI (DE; EN; FR; ES; IT) WITHOUT EXPANSION (SOFTWARE)

IP65 STAINLESS STEEL KEYBOARD MOUNTABLE AT SIMATIC HMI PRO UNITS; WITH NUMBER PAD; LAYOUT: US ADJUSTABLE INCLINATION WIDTH: 483MM (19" PRO UNIT)

SIMATIC HMI IPC477C PRO; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT INTEL CELERON M 1.2 GHZ; 1 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 4 GBYTE CF CARD; WINDOWS EMBEDDED S

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 8 GB WINDOW

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DR

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRI

SIMATIC HMI IPC477C PRO; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT INTEL CORE2DUO 1.2 GHZ; 4 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 32 GBYTE SSD; WIND

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WINAC RTX F

SIMATIC HMI IPC477C PRO; 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT INTEL CORE2SOLO 1.2 GHZ; 2 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 8 GBYTE CF CARD; WINDOWS EMBEDDED

SIMATIC HMI IPC477C PRO; 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT INTEL CORE2DUO 1.2GHZ; 4GB SDRAM (DDR3); 4X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS234(COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 34GBYTE SSD; WINDOWS

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 80 GB SOLID-STATE DRIVE SATA (ST

SIMATIC HMI IPC 477C 4 USB (BACK) + 1 USB (FRONT); 15" TOUCH DISPLAY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS 7 ULTIMATE MUI PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USBS (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12; 4 GB RAM; DDR3; 2ND CF SLOT NOT EQUIPPED;

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 1X 1 GBIT; PROFINET (IRT) 3 PORTS; (SOFTWARE BUNDLES ON REQUEST) 4 GB -RAM

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 2 GB; (NOT WI

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 19" TACTILE; 1280X 1024; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 DUO 1;2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ SSD (SOLID-STATE DRIVE) SATA 80 GO (STANDARD) WINDOWS 7 ÉDITION INTÉGRALE MUI PRÉINSTALLÉ SUR SSD SANS LOGICIEL SIMATIC

SIMATIC HMI IPC477C 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT W. USB INTERFACE INTEL CORE2DUO 1.2 GHZ; 2 GBYTE SDRAM (DDR3); 2 X PROFINET (IE); 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-S

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 110/230 V AC POWER SUPPLY UNIT WITH NAMUR;

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CORE 2 SOLO 1.2 GHZ; PROFIBUS DP 12; 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB

SIMATIC HMI IPC 577C PCI-SLOT; 4 USB (BACK) + 1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY; ; CELERON M 1;2 GHZ; PROFINET(IE); 2 X 1 GBIT; 1 GB -RAM; DDR3; 2. MASS STORAGE: NOT EQUIPPED; 1. MASS STORAGE: (OPERATING SYTEM OPTIONAL): 320 GB

SIMATIC HMI IPC 577C PCI-SLOT; 4 USB (BACK) + 1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY; ; CORE2SOLO 1.2 GHZ; PROFINET(IE); 2 X 1GBIT; 2 GB -RAM; DDR3; 2. MASS STORAGE: DVD RW; 1. MASS STORAGE: (OPERATING SYTEM OPTIONAL): 320 GB HDD SA

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" TOUCH; 800 X 600; WITH FRONT SIDE USB INTERFACE; DC 24V POWER SUPPLY; CELERON P4505 (2C/2T; 1.86 GH

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" TOUCH; 800 X 600; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EUROPE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" KEY; 800 X 600 WITH FRONT SIDE USB INTERFACE; DC 24V POWER SUPPLY; CELERON P4505 (2C/2T

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CELERON P450

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CELERON P450

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I3-330E

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE...

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 15" TOUCH; 1024 X 768; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE...

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" KEY; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I7-610E (

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 19" TOUCH; 1280 X 1024; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EURO

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY ; CORE 2 SOLO 1.2 GHZ; PROFIBUS DP 12; 2X 1 GBIT 4 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT WITH 4 GB CF CARD:

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: DVD RW 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE 320 GB HDD SATA+DVD RW 1ST MASS STORAGE: NOT EQUIPPED NO SOFTWARE PRE-INSTALLED POSSIBLE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE) 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE

SIMATIC HMI KTP400 COMFORT GEA; COMFORT PANEL; COMMANDE PAR TOUCHES/TACTILE; ÉCRAN TFT LARGE 4''; 16 MILLIONS DE COULEURS; INTERFACE PROFINET; INTERFACE MPI/PROFIBUS DP; 4 MO DE MÉMOIRE DE CONFIGURATION; WINDOWS CE 6.0; CONFIGURABLE À PARTIR DE WINCC COMFORT V11 DESIGN GEA

SIMATIC HMI TP1500 COMFORT GEA; COMFORT PANEL; TOUCH OPERATION; 15" WIDESCREEN TFT DISPLAY; 16 MILLION COLORS; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 24 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; CONFIGURABLE FROM WINCC COMFORT V11 SP2 GEA DESIGN

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 80 GB SOLID-STATE DRIVE SATA (STANDARD) WINDOWS 7 ULTIMATE MUI PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

Das Material vom Pupitre opérateur Typ wird von SIEMENS hergestellt und unter der Artikelnummer 6AV2128-3XB06-0AX0 vermarktet.Die alternative Artikelnummer der Ausrüstung ist : 6AV21283XB060AX0. Dieses Produkt kommt aus der Reihe SIMATIC HMI. Wir garantieren 12 Monate Ausrüstung in allen angebotenen Dienstleistungen.

Das Material vom Pupitre opérateur Typ wird von SIEMENS hergestellt und unter der Artikelnummer 6AV2143-6GB00-0AA0 vermarktet.Die alternative Artikelnummer der Ausrüstung ist : 6AV21436GB000AA0. Dieses Produkt kommt aus der Reihe SIMATIC HMI. Wir garantieren 12 Monate Ausrüstung in allen angebotenen Dienstleistungen.

Das Material vom Ecran Typ wird von SIEMENS hergestellt und unter der Artikelnummer 6AV7410-0AB00-0MB0 vermarktet.Die alternative Artikelnummer der Ausrüstung ist : 6AV74100AB000MB0. Dieses Produkt kommt aus der Reihe SIMATIC HMI. Wir garantieren 12 Monate Ausrüstung in allen angebotenen Dienstleistungen.

SIMATIC HMI TP1200 COMFORT INOX STAINLESS STEEL FRONT; CON- TINUOUS DECORATIVE FILM; DEGREE OF PROTECTION FRONT IP66K; 12" WIDESCREEN TFT DISPLAY; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 12 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; (MICROSOFT SUPPORT INCLUDED SECURITY UPDATES DISCONTINUED) CONFIGURABLE FROM WINCC COMFORT V11

BOÎTIER DE RACCORDEMENT SIMATIC HMI ADVANCED POUR MOBILE PANELS; FIXATION MURALE; PROFINET ET PROFISAFE; RACCORDEMENT RELAIS DE SÉCURITÉ; PONTAGE DE CIRCUIT ARRÊT D'URGENCE; DÉTECTION DU POINT DE CONNEXION COMMUTATEUR INTÉGRÉ; CLIENT MRP; IRT

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; PROFIBUS DP 12; 2 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE; WINDOWS EMBEDDED STANDARD 2009 PREINSTALLED; W/O SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280 X 1024; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE

SMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 512 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 DUO 1;2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 8 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 512 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 16 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT WITH 8 GB CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

SIMATIC 15 INCH TOUCH DISPLAY HMI.