TELEPERM LEUKHARDT

INTERFACE MODULE FOR SIMATIC S5 CENTRAL UNITS FOR CONNECTION TO AS 230/AS 235 SYSTEMS

ANALOG INPUT MODULE WITH 8 CHANNELS FOR THERMO- COUPLES AND/OR PT 100 RESISTANCE THERMOMETERS AND 4 ANALOG OUTPUTS; WITHOUT MEASURING RANGE PROM 6DS5500; CAN BE EXTENDED BY 6DS1703-8AB

INTERFACE MODULE FOR MINI FLOPPY DISK UNIT

SIEMENS TELEPERM C79040-A32-C447 BOARD

N8 INTERFACE MODULE FOR 20-M LOCAL BUS; 8 BIT

MEASUREMENT-POINT EXTENSION MODULE WITH 14 INPUT CHANNELS FOR THERMOCOUPLES AND/OR PT 100 RESISTANCE THERMOMETERS

BINARY INPUT MODULE WITH 32 INPUTS; FLOATING

DIGITAL OUTPUT MODULE WITH 32 OUTPUTS; 100 MA EACH; NON-FLOATING

INTERFACE MODULE FOR MONOCHROME MONITOR/ 20-MA CURRENT LOOP INTERFACE

POWER SUPPLY MODULE 24 V/5 V; 18 A

BINARY INPUT MODULE WITH 32 INPUTS; FLOATING; WITH INTERRUPT CONTROL

INTERFACE MODULE FOR OPERATION CHANNEL

DIGITAL OUTPUT MODULE WITH 32 OUTPUTS; 100 MA EACH; NON-FLOATING

ANALOG INPUT MODULE WITH 4 CHANNELS FOR THERMOCOUPLES; RESISTANCE THERMOMETERS AND PROCESS SIGNALS; CONFIGURABLE

CENTRAL PROCESSING MODUL FOR AS 235 AND AS 235 K

CLOSED-LOOP CONTROL MODULE WITH 2 PI CLOSED-LOOP CONTROLLERS K; WITH 2 CHANNELS

ANALOG OUTPUT MODULE WITH 4 OUTPUTS; FLOATING

CLOSED-LOOP CONTROL MODULE WITH TWO PI CONTROLLERS K

IM 616 INTERFACE MODULE CONNECTS FUM B SUBRACK WITH PROFIBUS DP MASTER (E.G. AS-S7)

SPPA-T3000/SPPA-T2000 FUM230 HART GEBERAUFBEREITUNGSBAUGR. F. ANALOGE STROMSIGNALE MIT HART; 16 AE

MODULE FUM 310; FAIL-SAFE BINARY TRANSMITTER SIGNAL CONDITIONING MODULE; -TRANSMITTER SUPPLY 24 V DC TRANSMITTER MONITORING FOR WIRE BREAK; SHORT CIRCUIT TO M; TO P AND INTERCORE SHORT CIRCUIT -8 CHANGEOVER CONTACTS OR -16 INDIVIDUAL CONTACTS -SIGNAL

MODULE FUM 640 HIGH-SPEED BINARY INPUT MODULE WITH 64 CHANNELS; OPTICAL ISOLATED; INPUTS 24V DC INPUTS 24V DC

AS 230/AS 231 CPU; VERSION E; CONTROL UNIT

I/O BUS COMPARATOR AND SWITCHOVER MODULE FOR AS 235 H EXTENSION UNIT

N-AS INTERFACE MODULE FOR 20-M LOCAL BUS

TELEPERM M

CLOSED-LOOP CONTROL MODULE WITH 2 PI CLOSED-LOOP CONTROLLERS K; WITH 2 CHANNELS

ANALOG OUTPUT MODULE WITH 4 OUPTPUTS; FLOATING

TELEPERM M BINARY CALCULATION MODULE

ANALOG INPUT MODULE WITH 4 CHANNELS FOR THERMOCOUPLES; RESISTANCE THERMOMETERS A. PROCESS SIGNALS WITH 8 ANALOG AND 8 BINARY OUTPUTS AND 4 BINARY INPUTS; CONFIGURABLE; WITH PLUGGED EEPROM

FLASHING PULSE GENERATOR

LIGHT PEN FOR OS 265-3 AND OS 265-6 SYSTEMS

MINI FLOPPY DISK UNIT WITH 80 TRACKS

K-LOOP CONTROLLER

SPPA-T3000

TELEPERM M/ME; VIDEO MODULE

AS488/TM SW ON MEMORY CARD 8MB WITH FUNCTION BLOCKS; TML STEP M AND 4MB USER MEMORY

ANALOG SIGNAL INPUT MODULE WITH 4 CHANNELS; NON-FLOATING

MODULE FUM 360FAIL-SAFE BINARY OUTOUT MODULE-24 CONTOLLER OUTPUTS 24 V DC/120 MA FOR COUPLING RELAYS-OUTPUT STATUS INDICATION VIA FRONT PANEL LEDS-SUITABLE FOR REDUNDANT USE

MODULE FUM 230 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE 0/4 TO 20 MA -16 INPUTS 0/4 TO 20 MA IN 2 OR 4 WIRE CIRCUIT -TRANSDUCER SUPPLY WITH 24 V DC -4 LIMIT VALUES PER CHANNEL -SIGNAL CORRECTION POSSIBLE -MONITORING OF THE TRANSMITTER SUPPLY;

IM 616 INTERFACE MODULE CONNECTS FUM B SUBRACK WITH PROFIBUS DPMASTER (E.G. AS-S7)

AS 230/AS 231 CPU; ADDRESS CONTROL MODULE

POWER SUPPLY SECTION OF UI BUS CONVERTER MODULE 6DS4400-8AB

INTERFACE MODULE FOR BLACK AND WHITE MONITOR AND WITH 20-MA CURRENT LOOP INTERFACE

PROFIBUS INTERFACE MODULE CP 581 TM-L2 (DP/FDL); GERMAN; CONSISTING OF: - INTERFACE MODULE - 5.25-INCH DISKETTE WITH RELOADABLE AS235 DRIVERS - 3.5-INCH DISKETTE WITH CP 581 TM PARAMETERIZING SOFTWARE - MANUAL IN GERMAN LANGUAGE

BINARY INPUT MODULE WITH 48 INPUTS; NON-FLOATING; WITH INTERRUPT CONTROL

ANALOG INPUT MODULE WITH 8 CHANNELS AND POWER SUPPLY FOR TRANSMITTERS; FLOATING

TELEPERM ANALOG CARD

EPROM MODULE 1 FOR AS 230/AS 230 K SYSTEMS VERSION C AND D UP TO D.03

DS 078 PROCESS TERMINAL; CONSISTING OF CRT CONTROLLER

POWER DISTRIBUTION TIER DC 24 V

6DS1412-8AA MODULE D'EXTENSION

COLOR VIDEO MODULE

SIEMENS; TELEPERM; TELEPERM MODULE

N-S5 INTERFACE MODULE FOR 20-M LOCAL BUS; 8 BI

INTERFACE MODULE FOR ONE I/O BUS

MODULE FUM 511 BINARY SIGNAL COUPLING MODULE -16 BINARY INPUTS WITE ELECTRICAL ISOLATION VIA OCTOCOUPLERS -16 BINARY OUTPUTS 120 MA STEADY OR FLASHING (8; 2; 0;5 HZ) -SUITABLE TO CONNECT CONSOLE CONTROL TILES -SUITABLE FOR NON-SAFETY-RELATED FUNCTION

BUS INTERFACE OF UI BUS CONVERTER MODULE 6DS4400-8AB

INTERFACE MODULE FOR I/O BUS

CLOSED-LOOP CONTROL MODULE WITH TWO PI CONTROLLERS S

ANALOG INPUT MODULE WITH 8 CHANNELS; 12 BIT RESOLUTION; WITH POWER SUPPLY FOR TRANSMITTERS; ISOLATED; HART TRANSMITTERS CAN BE CONNECTED

ANALOG INPUT MODULE WITH 8 CHANNELS FOR THERMO- COUPLES AND/OR PT 100 RESISTANCE THERMOMETERS AND 4 ANALOG OUTPUTS; WITHOUT MEASURING RANGE PROM 6DS5500; CAN BE EXTENDED BY 6DS1703-8AB

EPROM MODULE 2 FOR AS 230/AS 230 K SYSTEMS UP TO VERSION D.03

RAM MODULE; 1 MBYTE; WITHOUT BACK-UP BATTERY

MIGRATION SUBRACK II FOR AS 488/TM WITH 5 I/0 SLOTS FOR INSERTION OF AS 488/TM SYSTEM INTO THE TELEPERM M CABINET

CABLE CONNECTOR FOR PT 88/PT 89 PRINTERS; WITH 2 PLUGS 10 M

TELEPERM MODULE

AS 230/AS 231 CENTRAL PROCESSOR RAM/EPROM MEMORY CONTROL MODULE VERSION CID

MODULE FUM 230 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE 0/4 TO 20 MA -16 INPUTS 0/4 TO 20 MA IN 2 OR 4 WIRE CIRCUIT -TRANSDUCER SUPPLY WITH 24 V DC -4 LIMIT VALUES PER CHANNEL -SIGNAL CORRECTION POSSIBLE -MONITORING OF THE TRANSMITTER SUPPLY; MEASUREMENT RANGE OVERSHOOT AND UNDERSHOOT AND WIRE BREAK -SUITABLE FOR REDUNDANT USE

FUM 323 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE FOR PT100 AND THERMOCOUPLE; TRANSMITTER SIGNAL CONDITIONING -14 PT 100 RESISTANCE THERMOMETERS WITH FOUR WIRES POWER SOURCE; NO-LOAD AND OVERLOAD PROOF OR -28 THERMOCOUPLES OPTIONALLY WITH FIXED O

SIEMENS; TELEPERM M/ME; 4 CHANNELS ANALOG INPUT MODULE

INTERFACE MODULE FOR INTELLIGENT TERMINAL ET100U SINGLE CONTROL ELEMENT ICM 560 AND EXPANSION DEVICES SIMATIC S5

TELEPERM XP FUM 210 BINARY TRANSMITTER SIGNAL CONDITIONING AND DRIVE CONTROLLER MODULE BINARY TRANSM. SIGNAL CONDITIONING -24V DC TRANSMITTER SUPPLY -TRANSM.MONITORING F.WIRE BRAEK; SHORT CIRCUIT TO M SHORT CIRCUIT TO P;INTERCORE SHORT CIRCUIT -14 CH

MODULE FUM 232 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE FOR PT100 AND THERMOCOUPLE; TRANSMITTER SIGNAL CONDITIONING -14 PT 100 RESISTANCE THERMOMETERS WITH FOUR WIRES -28 THERMOCOUPLES OPTIONALLY WITH FIXED OR VARIABLE REFERENCE JUNCTION TEMPERATURE -MONITORING OF THE TRANSMITTER SUPPLY; MEASUREMENT RANGE OVERSHOOT AND UNDERSHOOT AND WIRE BREAK -SUITABLE FOR REDUNDANT USE BREAK -DIFFERENTIAL TEMPERATURE MEASUREMENT POSSIBLE -SUITABLE FOR REDUNDANT USE

INDUCTIVE COUPLER OF UI BUS CONVERTER MODULE 6DS4400-8AB

INTERFACE MODULE FOR SIMATIC S5 EXPANSION UNITS

CLOSED-LOOP CONTROL MODULE WITH 2 PI CLOSED-LOOP CONTROLLERS S; WITH 2 CHANNELS

8-CHANNEL ANALOG INPUT MODULE WITH 12-BIT RESOLUTION AND POWER SUPPLY FOR TRANSMITTER; FLOATING; INTERNAL AND AGAINST SYSTEM. HART TRANSMITTER CAN BE CONNECTED; WITH NAMUR FAILURE SIGNAL LEVEL

RAM MODULE; 1 MBYTE; WITHOUT BACK-UP BATTERY

AS 235 RAM MODULE REAL-TIME CLOCK AND 4000-KBYTE USER RAM WITHOUT BUFFER BATTERY

PROCESS OPERATION KEYBOARD FOR PROCESS OPERATIONS; TO ACKNOWLEDGE ALARMS; TO ENTER DATA AND TO SELECT AREA; GROUP AND LOOP DISPLAYS

ES 902 SUBRACK MAXI-TERMI-POINT SYSTEM

MODULE FUM 531 ANALOG SIGNAL COUPLING MODULE; -4ANALOG INPUTS WITH ELECTRICAL ISOLATION -4 ANALOG OUTPUTS -SUITABLE FOR NON-SAFETY-RELATED FUNCTIONS IN THE APF SYSTEM -4 ANALOG OUTPUTS 0 TO 10V; 2 TO 10V; 0 TO 20MA; 4 TO 20 MA; -SUITABLE FOR NON-SAFE

AS 230/AS 231 CPU; ARITHMETIC UNIT

PU-V 215 CPU WITH GERMAN SYSTEM SOFTWARE AS 215; VERSION C

TELEPERM XP SPPA-T3000/SPPA-T2000 FUM230 HART ANALOG INPUT MODULE FOR HART SIGNALS; 16 AI

MODULE FUM 210 FOR SENSOR CONDITIONING FAST BINARY SIGNAL ACQUISITION; OR DRIVE CONTROL SENSOR; MONITORING AND SIGNAL. MODULE CONDITIONING: 14 CHANGEOVER OR 28 SINGLE CONTACTS WITH SENSOR SUPPLY AND MONITORING; 28 BINARY INPUTS WITHOUT SENSOR SUPPLY

TELEPERM M/ME; HIGH PROCESSOR ARITHM MODULE

SIEMENS; TELEPERM CARD

INTERFACE MODULE N-PCI (3;3V/5V) FOR 20 M LOCAL BUS INCL. DOCUMENTATION ON CD-ROM

MODULE FUM 280 FOR 2 AUTONOMOUS CONTINUOUS P-; PI-; PD- OR PID CONTROLLERS OR 4 ANALOG CONTROLLER OUTPUTS W. CONTROL ALGORITHM IN THE AP -ANALOG OUTPUTS 0/4 TO 20 MA -FOUR OR TWO ANALOG INPUTS -SUPPLY AND ACQUISITION OF 2 ANALOG VALUES 0/4- 20MA -UP

INTERFACE MODULE IM 614 IN THE FUM B SUBRACK FOR CONNECTING THE AP TO THE FUM B SUBRACK OR FUM B SUBRACK WITH FUM B SUBRACK SUBRACK

TELEPERM

AS 230/AS 231 CENTRAL PROCESSOR CONTROL UNIT; VERSION C/D

N-AS INTERFACE MODULE FOR 20-M LOCAL BUS; REDUNDANT SYSTEMS

INTERFACE MODULE FOR ES 100 K EXTENSION SYSTEM

INTERFACE MODULE FOR OPERATION CHANNEL

BINARY OUTPUT MODULE WITH 16 RELAYS; FLOATING

ANALOG INPUT MODULE WITH 4 INPUT CHANNELS FOR THERMOCOUPLES AND/OR PT 100 RESISTANCE THERMOMETERS; WITHOUT MEASURING RANGE PROM

ANALOG INPUT MODULE WITH 4 CHANNELS FOR THERMOCOUPLES; RESISTANCE THERMOMETERS A. PROCESS SIGNALS CONFIGURABLE; WITH PLUGGED EEPROM