Katalog

CONVENTIONAL MOTORS SYNCHR R911283001

AC FEED MOTOR; DC LINK 600 V 33NM; 100K; 2000RPM NATURALLY COOLED; TG AND RLG; IP64 IM B5 (IM V1; IM V3) POWER AND SIGNAL CONNECTOR CONNECTOR OUTLET DIRECTION TRANSVERSE LEFT TACHOMETER GENERATOR; ROTOR POSITION ENCODER SMOOTH SHAFT; WITHOUT HOLDING BRAKE

POSITION SWITCH WITH TUMBLER MOLDED PLASTIC; 5 DIRECTIONS OF APPROACH; 24VDC SPRING-ACTUATED LOCK; 2NC+2NC 3X PG13.5 ; 2NC+2NC ASI-F ADAPTER SAFETY AT WORK CH1 AT 11 AND 32;12 JUMPERED ON 31 CH2 AT 21 AND 42;22 JUMPERED ON 41

SIMODRIVE 610

POWER SUPPLY MODULE PS71 SUFFIX CENTUM XL - MICRO XL

SMC-3 SMART MOTOR CONTROLLER; 480V; 60A; SERIES B

MICROLOGIX 1400 SMALL PROGRAMMABLE LOGIC CONTROLLER; 12 DIGITAL FAST 24V DC INPUTS; 8 DIGITAL NORMAL 24V DC INPUTS; 12 RELAYS OUTPUTS; 110/240V AC POWER

MODULE COMPACT K60 AS-I ANALOGIQUE 2 ENTRÉES ANALOGIQUES; IP67 2 X ENTRÉES; RÉSISTANCE PT100 NI100; 0..600 OHM POUR DÉTECTEURS 4 FILS 2 X CONNECTEURS FEMELLE M12

CABLE PROGRAMING PS4-201 ZB4-303-KB1

PICMG 1.0 SOCKET 478 800MHZ FSB CPU CARD WITH VGA; PCI-EXPRESS GBE; S-ATA;USB 2.0

ALPHA ISP 5.5HV SPINDLE AMPLIFIER

PU-V 215 CPU WITH GERMAN SYSTEM SOFTWARE AS 215; VERSION C

SINGLE AXIS SERVO DRIVE

0-073-0011-2 RÉGULATEUR LIBREMENT PROGRAMMABLE TAC XENTA 302

INTERRUPTEUR DE POSITION SIRIUS BOITIER METAL 40MM SELON EN50041 RACCORDEMENT 1X (M20X1;5) COMMANDE PIVOT. GAUCHE/DROITE 1NO/2NF A ACTION BRUSQUE REGLABLE; AVEC LEVIER METAL 100MM REGLABLE EN LONGUEUR ET GALET PLASTIQUE 19MM

INTERRUPT. DE BASE POUR INTERRUPT. POSITION 3SE5112; BOITIER METAL; SELON EN50041; 40MM; 1X(M20X1;5); 2NO/1NF ACTION DEPENDANTE; SANS TETE DE COMMANDE

SIMODRIVE 611 DIGITAL HIGH PERFORMANCE; DIRECT MEAS. SYSTEM 2 AXES CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE;

PRECISION AC SERVO - 6;5A - 13A PEAK MAX406AN

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 30KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 37KW FOR 150% 3S;110% 57S;100% 240S

SINUMERIK 840C/ 840CE 16 BIT INTERFACE CONNECTION TO SIMATIC EU

CONTROLLER

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 90KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO 50 DEG C OUTPUT LIGHT OVERLOAD: 110KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO 40 DEG C 634 X 350 X 316 (HXWXD); FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

ECS MOTOR SPINDLE SYNCHRONOUS 15.5 KW; 42 NM; 3500 RPM NMAX 18000 RPM; S6-40% 55 NM CARTRIDGE VERSION SPINDLE DIAMETER 200 MM BEARING WITH PERMANENT GREASE LUBRICATION CONNECTION FOR BEARING SEALING AIR DISCHARGE AIR TOOL INTERFACE HOLLOW-SHAFT ENCODER; SIN/COS 1VPP; 256 S/R; CLOSED COOLING JACKET FOR WATER COOLING AND 50 BAR ROTARY UNION FOR TOOL INTERNAL COOLING; TOOL INTERFACE HSK A63 CLAMPING FORCE 18000 N; SENSORS: TEMPERATURE KTY84; ANALOG SENSOR FOR CLAMPING STATUS; TOOL CLAMPED; DRAW-BAR IN RELEASE POSITION; CLAMPED W/O TOOL; DIGITAL SENSOR FOR POSITION RELEASING PISTON; SIGNAL CONNECTIONS VIA CONNECTORS; CABLE CONNECTION VIA FREE CABLE LENGTH 1.5 M

COMMUTATEUR DE VERROUILLAGE DE SÉCURITÉ SIEMENS; 2 NF / 1 NO IP66; IP67; DIMENSIONS 110 X 40;5 X 37;3 MM; SÉRIE 3SE5

VARIATEUR DE FRÉQUENCE E84 AVHCE 5524SX0

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 2.2 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : STANDARD .

SIMATIC S7-300; ANALOG OUTPUT SM 332; ISOLATED; 4 AO; U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS; 20-POLE; REMOVING AND INSERTING POSSIBLE WITH ACTIVE BACKPLANE BUS

POWER SUPPLY MODULES PCD4.N210M4 POWER SUPPLY MODULE; PRIMARY 24 VDC; SECONDARY 5 V; 4 A +/-15 V FOR ..W AND ..H MODULES

SIMATIC S5 PLUGIN SUBMODULE FOR IP281 COUNTER MODULE

PROCESSOR MODULE VERSION K CENTRAL UNIT WITH 1 CPU 1 DATA LINE AND PGU INTERFACE

CIRCUIT IPC/24IN

PCD3 PROCESSOR UNIT WITH ETHERNET TCP/IP; WEB AND FTP SERVER; FILE SYSTEM; CPU WITH 1 MBYTE USER PROGRAM; BACKUP OPTION WITH PCD7.R5XX/R610 FLASH CARD; USB PORT FOR PG5; UP TO 1024 I/O; 2 INTERRUPT INPUTS; RS-232; 2X RS-485 FOR PROFI-S-NET/MPI/S-BUS; DATA PROTECTION 1-3 YEARS

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 2 AI; 9/12/14 BITS RESOLUTION; U/I/THERMOCOUPLE/RESISTANCE; INTERRUPT; DIAGNOSTICS; 20 PIN

DRIVE - 620 VECTOR STANDARD SERIES - 3 PHASE - 10 HP - 7.5 KW - 380-460 VAC - 50/60 HZ - IP20

SIRIUS; MODULE CENTRAL 3RK3 ADVANCED POUR SYSTÈME DE SÉCURITÉ MODULAIRE 3RK3 4/8 F-DI;1F-RO;1 F-DO;24V CC MONITEURS D'ESCLAVES AS-I DE 12 SORTIES DE SÉCURITÉ SUR LE BUS AS-INTERFACE PARAMÉTRABLE AVEC LOGICIEL SAFETY ES LARGEUR 45MM BORNE À VIS JUSQU'À SIL3 (CEI 61508) JUSQU'AU NIVEAU DE PERFORMANCE E (ISO 13849-1) 9 MODULES D'EXTENSION RACCORDABLE

SIMODRIVE 611-A FEED MODULE; 40/80 A; ENHANCED INTERFACE

SIMODRIVE 611 SHIELD CONNEC. PLATE FOR INTERNAL COOLING; MODULE WIDTH 300 MM

DRIVE INVERTER FOR SYNCHRONOUS SERVO MOTORS 1.5 KW (2.0 HP) WITH RESOLVER; CFC CONTROL MODEWITH PROFI-BUS-DP

SIMODRIVE 611 PULSED RESISTOR; INTERNAL RESISTANCE FOR 0.3/25 KW UNIVERSAL HOUSING FOR 211/288 MM DEPTH

SIMODRIVE 611-A/D INFEED/REGEN.FEEDBACK MODULE; 36/47 KW; REGULATED

SIMODRIVE 611A/D INFEED MODULE; 28/50 KW; UNREGULATED; FOR INTERNAL COOL.

SIMODRIVE 611 POWER MODULE; 1 AXIS; 108 A; EXTERNAL COOLING; MOTOR RATED CURRENT: 1PH = 45 A INDUCTION MOTOR = 45 A

SIMODRIVE 611 CONTROLL MODULE

SIMODRIVE 611 INFEED/REGEN.FEEDBACK MODULE; 120/156 KW; REGULATED; INTERNAL COOLING

UDC120 REGULATEUR UNIVERSEL UDC 1200 48X48MM MODEL : DC1202-1-0-0-0-1-1-0-0 UNIVERSEL DIGITAL CONROLLER DIM: 48X48 MM DIN: 1/16 PRECISION: 0.1 %

BOARD

TELEPERM XP SPPA-T3000/SPPA-T2000 FUM230 HART ANALOG INPUT MODULE FOR HART SIGNALS; 16 AI

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 DUO 1;2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 8 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 512 PT (AVEC ARCHIVES ET RECETTES)

SERVO CONTROL 310VDC NOMINAL-22AMP PEAK-50AMP

BATTERIE SANYO 3V CR14250SE-R CJ1W-BAT01 - OMRON

CURRENT TRANSFORMER CONFORM WITH CE AND UL TOP HAT RAIL (DIN-RAIL TS35) MOUNTED WEIGHT: 0;12KG

SOLID STATE RELAY 1-PHASE ZERO-CROSS SENSE SYSTEM MONITORING; CONTROL: LOW VDC; OPERATIONAL: 400VAC; 25A; ALARM: NPN NC; OPTION: S00.

SIMODRIVE 611 SURGE ARRESTER F. SYSTEM INFEED 10KW; ADD-ON KIT F. V2 SYSTEM INFEED MODULES

SIMATIC IPC 477D; ÉCRAN 12" TACTILE ; 4 USB (FACE ARRIÈRE); ETHERNET (10/100/1000) CELERON U827E ; ETHERNET 2 GBIT (IE/PN) ; 2 GO ; 1X RS-232 ; SANS PCIE ; WINDOWS 7 ULTIMATE; 64 BITS ; SANS LECTEUR REMPLAÇABLE ; SSD 80 GO STANDARD (MLC) ; SANS LOGICIEL SIMATIC ; ALIMENTATION INDUSTRIELLE 24V CC.

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 16 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT WITH 8 GB CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

RESISTRON RES-207 TEMPERATURE CONTROLLER

DIGITAL HIGH-SPEED INPUT UNIT; 16 X 24 VDC INPUTS; SCREW TERMINAL

RESISTRON RES-207 TEMPERATURE CONTROLLER 400VAC

TRANSFORMATEUR D'INTENSITE

SIMATIC 15 INCH TOUCH DISPLAY HMI.

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WITHOUT SIMATIC SOFTWARE

SIMATIC FIELD PG; PENTIUM III 850 MHZ; 256 KB 2ND LEVEL CACHE; STEP 7; STEP 7 MICROWIN; ; 512 MBYTE RAM (2X256 MB SDRAM); 30 GBYTE HDD EIDE; CD ROM DRIVE & SUPERDISK LS 240 DRIVE; WINDOWS 2000 GERMAN; POWER CABLE FOR: GER;FR;NL;SP;BEL;AUSTRIA;SWD; FIN STEP-SOFTWARE INST. 12/2001

SIMATIC FIELD PG; PENTIUM III 1 GHZ; 256 KB 2ND LEVEL CACHE; STEP 7 PROFESSIONAL; STEP 5; STEP 7 MICROWIN; ; 512 MBYTE RAM (2X256 MB SDRAM); 40 GBYTE HDD EIDE; DVD-ROM / CD-RW DRIVE & 1.44 MB FLOPPY DISK DRIVE; WINDOWS XP PROF. MUI DEFSI; POWER CABLE FOR: GER;FR;NL;SP;BEL;AUSTRIA;SWD; FIN STEP-SOFTWARE INST. 12/2002

CABLE LIAISON RELIANT CONS. SPXX A

CONTROLEUR DE TEMPÉRATURE

PUPITRE DIGITAL

MICROMASTER 440 AVEC FILTRE CLASSE A INTEGRE 1AC 200-240 V +10/-10% 47-63 HZ MOMENT CONSTANT 0.37 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 0.37 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

IPC SIGMATEK - ETEK

- ENTRÉE PROCESS; TEMPÉRATURE; POTENTIOMÈTRE; RÉSISTANCE - SORTIE: 2 RELAIS À SEUILS; PROGRAMMABLES INDÉPENDAMMENT - AFFICHAGE ÉLECTROLUMINESCENT ROUGE ± 10 000 POINTS (14MM) - FORMAT 48X96MM; IP 65 EN FACE AVANT - ALIMENTATION UNIVERSELLE: 20-270VAC / 20-300VDC

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 512 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 200

SIMODRIVE 611 POWER MODULE; 1 AXIS; 8 A EXTERNAL COOLING MOTOR RATED CURRENT: 1FT5 = 4 A; 1FT6 = 3 A INDUCTION MOTOR = 3 A

SIMODRIVE 611 MODULE DE PUISSANCE; 1 AXE; 200A; REFROIDISSEMENT EXTERNE COURANTS MOTEUR NOMINAUX: 1FT5 = 100 A; 1FT6 = 70 A; 1PH = 85 A; ASYNCHRONE = 85 A

6SN11511FX101AB0 DRIVE MODULE SIMODRIVE

32 SORTIES; TRANSISTOR NPN; 12 À 24 VC.C. / 0;5 A;