Fernbedienung

SINUMERIK 840D/DE NCU 573.2 PENTIUM II SANS LOGICIEL SYSTEME MEMOIRE: NC 2;5MO; AP 96KO PROFIBUS-DP PREPARE

PHASEO ABL8 - ALIMENTATION À DÉCOUPAGE - 3A - 100 À 240VCA MONO/BIPHASÉ - 24VCC

TSX QUANTUM TERMINAL BLOCK; 40 POINTS

SINUMERIK FM-NC/840D 6FX2007-1AC04 HAND-HELD UNIT B-MPI COILED CABLE 3.5 M; 2 EMERGENCY-STOP CHANNELS; 2 PERMISSIVE SWITCH CHANNELS; 3 STEPS; WITH 3-WIRE CONNECTION

MODICON X80 - RACK POUR M340 - 4 BUS X - IP20.

SIMATIC DP; ET 200M INTERFACE IM 153-4 PN IO HIGH FEATURE FOR MAX. 12 S7-300 MODULES; SUPPORTS FAIL SAFE MODULES; HART MODULES SHARED DEVICE; MEDIUM REDUNDANCY PROTOCOL.

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STANDARD 15 MM WIDE +/-10 V; 13 BIT + SIGN +/-5 V; 12 BIT+ SIGN; 1..5V; 12BIT; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

PNOZMULTI CLASSIQUE; MODULE D’EXTENSION; STANDARD; ENTRÉES ET SORTIES DIGITALES; 16 SORTIES; SORTIES STATIQUES; 0;5 A; U ..

LOOP-POWERED ISOLATOR1-; 2- AND 4-CHANNEL GALVANIC ISOLATION– SLIMLINE CHANNEL WIDTH OF LESS THAN 6 MM– NO SEPARATE SUPPLY NECESSARY– LOW RESPONSE TIME– HIGH NOISE SUPPRESSIONENVIRONMENTAL CONDITIONSSPECIFICATIONS RANGE....................................... -20°C TO +60°CCALIBRATION TEMPERATURE................................. 20...28°CRELATIVE HUMIDITY............................................ < 95% RH (NON-COND.)PROTECTION DEGREE........................................... IP20MECHANICAL SPECIFICATIONSDIMENSIONS (HXWXD)..................................... 109 X 23.5 X 104 MMWEIGHT APPROX................................................ 155 / 180 / 230 G (1 / 2 / 4CHANNELS)DIN RAIL TYPE................................................... DIN 46277WIRE SIZE........................................................ 1 X 2.5 MM2 STRANDED WIRESCREW TERMINAL TORQUE.................................... 0.5 NMCOMMON SPECIFICATIONSISOLATION VOLTAGETEST VOLTAGE.................................................... 2 KVACRESPONSE TIMERESPONSE TIME (0...90%; 100...10%)............. < 4 MSINTERNAL CONSUMPTION; PERCHANNEL........................................................... 40 MWVOLTAGE DROP................................................... < 1.8 VDC; MIN.VOLTAGE DROP................................................... 1.8 V + (IOUT.*RLOAD); MAX.SIGNAL / NOISE RATIO......................................... MIN. 60 DB (0...100 KHZ)ACCURACY........................................................ BETTER THAN 0.1% OF SELECTEDRANGEEMC IMMUNITY INFLUENCE................................ < ±0.5% OF SPANINPUT SPECIFICATIONSCURRENT INPUTMEASUREMENT RANGE....................................... 0...23 MAINPUT RESISTANCE.............................................. ? 90 ? + RLOAD (@ 20 MA)OUTPUT SPECIFICATIONSCURRENT OUTPUTSIGNAL RANGE................................................... 0...23 MAMIN. SIGNAL RANGE............................................ 1:1LOAD (MAX.).................................................... 20 MA/600 ?/12 VDCLOAD STABILITY.................................................. < 0.03% OF SPAN / 100 ?CURRENT LIMIT.................................................... 50 MAVOLTAGE LIMIT.................................................... 15 VDC*OF SPAN.......................................................... = OF THE PRESENTLY SELECTEDRANGEAPPROVALSEMC............................................................... EN 61326-1EAC TR-CU 020/2011................................... EN 61326-1

NUM 1060 CLAVIER FACE AVANT MACHINE MP01

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 16 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO STANDARD DC 24V/0.5A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

CARTE EXTENSION MÉMOIRE SRAM 2MO.

SIMATIC DP; ELECTRONIC BLOCK FOR ET 200L; 32 DO; 24V DC/0.5A

SINUMERIK 840C/840CE IN-ANALOG I/O MODULE 8 ANALOG INPUTS +/-10 V

COMMUNICATIONS PROCESSOR CP 343-1 FOR CONNECTION OF SIMATIC S7-300 TO INDUSTRIAL ETHERNET OVER ISO; TCP/IP AND UDP; S7 COMMUNICATION; FETCH/WRITE; SEND/RECEIVE; WITH AND WITHOUT RFC1006 DIAGNOSTIC ADD-ONS MULTICAST; PBK; INITIALIZATION VIA LAN; 10/100 MBIT

HIGH SPEED COUNTER (HSC).

1746 SLC SYSTEM; 16 CH-AC INPUT MODULE FOR PROGRAMMABLE CONTROLLER

DIGIDRIVE SK 1.2T - 0;55KW - 0;75HP.

DISCRETE INPUT MODULE MODICON QUANTUM 32I 24VDC

SIMATIC S7-200; ANALOG INPUT EM 231; FOR S7-22X CPU ONLY; 4 AI; 0 - 10V DC; 12 BIT CONVERTER.

PROCESSEUR AVEC UNE LIAISON UNITELWAY INTÉGRÉE; RAM INTERNE DE 32K; ACCEPTANT UNE CARTE PCMCIA DE 64K MAX.

CARTE DE COMMANDE D'AXE (MOTEUR CONTINU)

UNITÉ CENTRALE SMC600

PLC-2 UNIVERSAL REMOTE I/O ADAPTER MODULE FOR PLC-2; PLC-3 & PLC-5. COMMUNICATION RATE: 57.6 KBIT/S; 115 KBIT/S; 230 KBIT/S; CONNECTORS: 1771-WB WIRING ARM; CABLE: BELDEN 9463; BACKPLANE CURRENT LOAD: 1.0A @ 5V SERIE E.

BLOC VISUALISATION POUR RACK 19 POUCES

APCI-INTERFACE MODULE 3IF772.9

SYSTÈMES I/O ENTRÉE DIGITALE À 8 CANAUX; DC 24 V; 3 MS

DISCRETE I/O MODULE M340 - 16 INPUTS - 24 V DC - 16 OUTPUTS - SOLID STATE

SIMATIC S5; CPU 100 UNITE CENTRALE POUR S5-100U AVEC ALIMENTATION 24V CC/9V SANS MANUEL

TÊTE DE BAC SMC25 ET SMC35

SMC 50 / SMC 600 CARTE 32 ENTRÉES 48V

SIMATIC S5; CPU 928B CENTRAL CONTROLLER MODULE F. S5-135U/155U PLC

SIMATIC S5 451 DIGITAL OUTPUT MODULE FLOATING FOR S5-90U/-95U/-100U; ET 100U; ET 200U 8 OUTPUTS 24V DC; 1A

CARTE DE LIAISON INTER-AUTOMATES

PROCONTIC DIGITAL OUTPUT MODULE 07 YS 80

SMC600 COUPLEUR RACK EXTENSION SMC600

COMMUNICATION ÉDITEUR ET TRANSPARENT

SIMATIC S7-300; CP 341 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; TERMINAL MODULE TM-P15C23-A0 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 INTERRUPTED

EMBASE POUR ET 200S PMD POUR MODULE DE PUISSANCE POUR DEPARTS-MOTEURS

SIMATIC S7; TEXT DISPLAY FOR S7-200; 2 LINES WITH CABLE (2.5M) A.MOUNTING ACCESS. EAN: 4025515160403.

COMMUNICATION PROCESSOR CP 5613 PCI CARD CARD(32BIT) F. CONNECTION TO PB INCL. DP BASE SW WITH NCM PC: DP RAM INTERF. FOR DP MASTER W. PG AND FDL PROTOCOL;

SIMODRIVE 611 POWER MODULE; 1 AXIS; 300 A; EXTERNAL COOLING; ADD-ON FAN REQUIERD MOTOR RATED CURRENT: FEED = 100 A MAIN SPINDEL = 120 A

MICROMASTER 4 COMMUTATING CHOKE 380-600 V 3AC 45;8A FOOTPRINT FSD - 0.41 MH

BACKPLANE 10 SLOT

SIMATIC S7-400; UR2 RACK; CENTRALIZED AND DISTRIBUTED WITH 9 SLOTS

SIMATIC DP; 5 ELECTRON. MODULES ET200S: 2DO RELAY(FORM C CONT.) DC24V-48V/5A; AC24V-230V/5A; 15 MM WIDTH; FIRST-UP SIGNAL; 5 PIECES PER PACKAGING UNIT.

TSX MOMENTUM 16 DI/16 DO 24VDC 0.5A. WITHOUT TERMINAL BLOCK

SIMATIC S7-200; CPU 216 COMPACT UNIT; AC POWER SUPPLY 4K PRG/2;5K DW;24DI DC/16DQ RLY 2 PPI/FREEPORT PORTS

SIMATIC SC;ELECTRONIC SUBMODULE 2 AI; 4..20MA; +/-20MA.

1734-IB4 POINT I/O 24V DC 4-CHANNEL SINK INPUT MODULE

INTERFACE MODULE; DIGITAL; 20 POINT; ISOLATED; FUSIBLE; 5 X 20 MM FUSE CLIPS; 120 VOLT AC/DC; BLOWN FUSE INDICATOR; EXTRA TERMINALS FOR OUTPUT

ALSPA C50 MODULE 8 ENTRÉES TOR ISOL GALV 48V DC PNP LENTE

ALSPA C50-6301 4 SORTIES RELAIS INDÉPENDANTES

SIMATIC S5; COUPLEUR IM 314 (DANS CHASSIS D'EXTENS.); POUR CONNEX. DECENTRALISEE A 600 M; DE CHASSIS DE BASE A CHASSIS D'EXTENSION

SIMATIC S5; ADAPT. DE MESURE POUR ENTREES ANALOGIQUES +-12;5MV;/+-50MV/+-500MV/PT 100

SIMATIC S5; COUPLEUR IM 304 (DANS CH. BASE); POUR CONNEX. DECENTRAL. JUSQ. 600M;DE EG A ZG ET POUR CONNECTER LES ZG POUR S5-150H;-155H;-115H;-115F.

1746 SLC SYSTEM; SLC 5/02 CONTROLLER; 4K MEMORY - DH 485 - SERIE C

EXTENDABLE RACK - FOR MULTI-RACKS CONFIGURATION - 12 SLOTS - IP20

MOD.ETH.TCP/IP WEB S.10/100MHZ FACT.CAST

UNIDRIVE AC DRIVE 1.1KW - UNI1402 INPUT 3 PH 380VAC TO 480VAC ± 10 % 50-60 HZ OUTPUT 3 PH 0-480VAC 2.8 AMP .

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D.

SINAMICS TERMINAL MODULE TM31 ADD ON BOARD FOR SINAMICS WITH DIGITAL AND ANALOG IN- AND OUTPUTS IP20 FOR CAP RAIL MOUNTING

DEVICENET SCANNER FOR MICROLOGIX & COMPACTLOGIX; SERIES B

COUPLEUR DE BUS DE TERRAIN DEVICENET ECO

1756-IF16 CONTROLLOGIX ANALOG INPUT MODULE; CURRENT/VOLTAGE; 16-POINT (36 PIN) SERIE A

SINAMICS CONTROL UNIT CU320-2 PN WITHOUT COMPACT FLASH CARD

ALLEN BRADLEY 1756-PA75 CONTROLLOGIX POWER SUPPLY 85-265VAC / 5V@13A; RACK MOUNT SERIE A

SUPPORT DE CARTE MAX.250V/4A

1794-OB16 - 1794 FLEX; FLEX EX; FLEX XT I/O SYSTEM; OUTPUT MODULE; 24V DC; 16 SOURCE OUTPUTS

TSX PREMIUM CPU TSX 57.30 V3 1024 E/S TOR 128 E/S ANALOG 32 VOIES MÉTIERS 64/80 K MOTS INTÉGRÉ 384 K MOTS MAXI SUR PCMCIA 3 RÉSEAUX 8 BUS AS-INTERFACE 1 BUS CANOPEN 2 BUS DE TERRAIN

ALIMENTATION 24VDC; 36W NON ISOLÉE

SIMATIC DP; TERMINAL MODULE TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE

SIMATIC DP; CONNECTING BLOCK M12; 7/8" FOR ET200ECO; 2 X M12 AND 2 X 7/8"; 2 ROTARY CODING SWITCH FOR PROFIBUS-DP; ADDRESS SETTING

SIMATIC DP; ET 200M INTERFACE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; TIME STAMPING

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 4 DI / 4 DO RELAY; 5-30 V DC; 250 V AC

SIMATIC NET; CP 242-2 PROCESSEUR DE COMMUNICATION P. RACCORDER UN SIMATIC S7-200 A AS-INTERFACE

PLATINE UC 10 EMPLACEMENTS; MODÈLE 331/341

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16DI; 24 V DC; 20 PIN

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 2 AI; 9/12/14 BITS RESOLUTION; U/I/THERMOCOUPLE/RESISTANCE; ALERT; DIAGNOSTICS; 1 X 20 PIN; REMOVE/INSERT W. BACKPLANE BUS.

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200; 3.3 V NFLASH; 64 KBYTES.

CONTROLLOGIX; 85-265 VAC POWER SUPPLY (10 AMP @ 5V) SERIE B

CARTE PCMCIA CANOPEN MAÎTRE V4.02 (TYPE III).

BLOC CONTACTS VIS ÉTRIER POUR BOUTON -ZBE22-1O

SIMATIC ET 200SP; BASEUNIT BU15-P16+A10+2B; BU-TYPE A0; PUSH-IN TERMINALS; WITH 10 AUX-TERMINALS; BRIDGED TO LEFT BU WXH: 15MMX141MM

THERMOCOUPLES; TEMPERATURE PROBES; 4 HIGH LEVEL ANALOG .INPUT .ISO.16 BIT...

COMPACTLOGIX 8 CHANNEL ANALOG VOLTAGE/CURRENT INPUT MODULE

BASE TSX MICRO 3721 100/240 VAC; 18E 0-10V; 3S

TSX 57-30; 16 RACKS. CAPACITÉ E/S. 1024 E/S TOR. 128 E/S ANA. 32 VOIES MÉTIER. CAPACITÉ MÉMOIRE. 80 KMOTS (INTÉGRÉE PROCESSEUR)

SIMATIC S5; CPU 103 CENTRAL PROCESSING UNIT FOR S5-100U...

FIPIO AGENT PCMCIA CARD - FOR PREMIUM PROCESSOR; CONNECTION TO FIPIO BUS TSXFPP-10

TSX MICRO MODULE ANALOGIQUE 2 SORTIES RÉSOLUTION 11 BITS+SIGNE OU 11BITS

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4 F-DO PROFISAFE; DC 24V/2A; 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF

SIMATIC DP; DISTRIBUTED I/O DEVICE LINK DP/PA COUPLER NON EX-VERSION 1000MA/31V FIELD BUS COUPLER BETWEEN PROFIBUS DP AND PROFIBUS PA FOR EXPANDED TEMPERATURE RANGE PROTECTION CLASS IP 20

ALLEN-BRADLEY 1756-M02AE CONTROLLOGIX 2-AXIS ANALOG ENCODER SERVO MODULE; QUADRATURE FEEDBACK; SERIES A

SIMATIC NET; REPEATER FOR AS-INTERFACE FOR CABLE EXTENSION; WITH FK-E COUPLING MODULE

BOITIER DE COM. CLEVER BRIDGE

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG DESIGN; 8 MBYTE