Conversione energia / energia

UNIDRIVE SP 22T - 15KW - 32A

VARIATEUR RÉGÉNÉRATIF SUR RÉSEAU POUR MOTEUR À COURANT CONTINU - 25A - 4 QUADRANTS

MENTOR PM FOUR QUADRANT; 210 AMP; 75KW DC DRIVE

DIGIDRIVE SK 1M - 0;37KW - 0;5HP - DRIVE; AC; 0.5HP; 240V; 2.2A; CT; 230VIN 1PH; 0.5HP 2.2A VT;W/DB TRANS ; 6.1"HX3.0"WX5.7"D; COMMANDER SK

OPERATOR F5 PROFIBUS DP

CLOSED-LOOP AND CONTROL MODULE MOTION CONTROL 60 MHZ CUMC.

DSQC 508 BATTERY UNIT FOR M2000 CONTROLLER

POWER SUPPLY DSQC 374 S4- S4C M97-M99.

SINAMICS S120 SINGLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V; 18A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE.

ACS401-0011-3-2 - ACS400 - 11KW

VARIATEUR DC/AC ENTREE CC: UDN: 300V IDMN: SORTIE CA: UN: 0-250V IN:

MODULE DRIVE SYSTEM - DSQC 545A DC570 - DSQC545A

LENZE 9300 SERVO INVERTER 3 AC 400 1.5 KW PANEL?MOUNTED UNIT

9300-SERIES VECTOR FREQUENCY INVERTER; MAINS CONNECTION 3 X 400 / 480 V; RATED POWER: 3.0 KW

MODULE DE FREINAGE AVEC RÉSISTANCE INTÉGRÉ 100W PERMANENT 12KW CRÊTE 1%

MODULE D’AXE MAS51A005-503-00 I NOMINAL 5 A; U NOMINALE 3X 500 VAC

NUM MDLA SERVO DRIVE 14A .

LENZE KEYPAD E82ZBC ID.NO. 00417192

SIMODRIVE 610/210 FDD P.C.B POWER SUPPLY UNIT AND MONITORING UNIT

SIMODRIVE 610 AC FDD PCB POWER UNIT; A28 8/16 A; 2 AXES

LENZE 9300 SERVO INVERTER 3 AC 400 0.37 KW PANEL?MOUNTED UNIT.

DRIVES FIRMWARE MODULE FOR MACHINE TOOL APPLICATION R911285655

LENZE 9300 SERVO INVERTER 0.37KW 3/PE 320VAC- 528VAC 4 HZ -65HZ

SIMOTICS L PRIMARY SECTION FOR LINEAR MOTOR; COMPONENT 3-PHASE SYNCHRONOUS MOTOR; DC LINK 600V; 1580N; 200M/MIN WATER-COOLED; IP65 CABLE OUTLET COOLING WATER CONNECTION FROM ALUMINUM

MOVITRAC INVERTER - TYPE MC - SERIE 07 - VERSION A - RECOMMENDED MOTOR POWER : 0;75KW - CONNECTION VOLTAGE : 380…500VAC - RADIO INTERFERENCE SUPPRESSION A - CONNECTION TYPE : 3-PHASE - QUANDRANTS : 4Q (WITH BRAKE CHOPPER) - TYPE : STANDARD

SIMOTION / SINAMICS S120 TERMINAL MODULE CABINET TM41 WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS PLUS INCREMENTAL ENCODER SIMULATION

SIRIUS SAFETY RELAY WITH RELAY ENABLING CIRCUITS (EC) 24 V DC; 45 MM OVERALL WIDTH SCREW TERMINAL EC INSTANTANEOUS: 3 NO EC DELAYED: 0 NO SC: 2 NC AUTOSTART/MONITORED START BASIC DEVICE MAXIMUM ACHIEVED SIL: 3; PL: E.

VARIATEUR 200V COURANT 4A PEAK 15A.

DRIVE 2.3AMP 480VAC 3PHASE IP20

VLT 2800 SERIES 0.75KW / 1.0 HP; I[IN]:1.9A; U [IN]:3X380-480V 50/60HZ; WITHOUT FILTER (NO EMC);BOOKSTYLE IP20; WITHOUT FIELDBUS OPTION

MENTOR II DC DRIVE 420 A REGEN MODEL THREE PHASE INPUT (208-460 VAC) DC ARM OUTPUT (240-500 VDC) FIELD OUTPUT (150-300 VDC) .

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 37KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO 50 DEG C OUTPUT LIGHT OVERLOAD: 45KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO 40 DEG C 497 X 275 X 204 (HXWXD); FSE PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

SYNCHRONOUS SERVOMOTORS 6SM37M-6000

KUKA 6 AXES SERVO POWER MODULE KRC1 REF 00-103-494

PACDRIVE MC4 HW VERSION 11 5 A 230 VAC

ALIMENTATION RAIL DIN WAGO EPSITRON® ECO POWER 787-732 28 V/DC 10 A 240 W 1 X

ROPEX RESISTRON TEMPERATURE CONTROLLER RES-203-0-3 230VAC 50-60 HZ

LENZE 9300 SERVO INVERTER 3 AC 400 22.5KW PANEL?MOUNTED UNIT.

SERVO POWER MODULES TRA31A

SIEMENS 3~PERMANENT MAGNET MOTOR SYNCHRONMOTOR 1FT5064-0AF71-2-Z

KINETIX 6000 AXIS MODULE; INVERTER; INPUT POWER: 650V DC; OUTPUT POWER: 400/460V AC (400V CLASS) 9A; CONTINUOUS POWER OUTPUT: 3.9 KW; SAFETY EQUIPPED WITH SAFE TORQUE OFF FUNCTIONALITY MAX SHORT CIRCUIT 100;000A

TWIN LINE CONTROLLER 51X POSITIONING CONTROLLER FOR STEPPER MOTORS WITH FIELD BUS 350W

FANUC ALPHA SVM-80 SERVO AMPLIFIER. SINGLE AXIS TYPE A INTERFACE ALPHA MODULE. INPUT 283– 325 VOLT / 4;75 KW. OUTPUT 18;7A

CIRCUIT-BREAKER SIZE S2. FOR MOTOR PROTECTION; CLASS 10; A-REL. 40...50A; N-REL. 650A; SCREW TERMINAL; STANDARD SWITCHING CAPACITY

MECHATROLINK INTERFACE UNIT

SINAMICS DOUBLE MOTOR MODULE INPUT: 600 V DC OUTPUT: 3-PH. 400 V; 3 A/3 A INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE

R30IA SERVO AMPLIFIER 6-AXIS 5.1 KW INPUT 1/3PH 200-240 VAC 50-60HZ OUTPUT 240 VAC 110 AMP J1 23 AMP J2 23 AMP J3 23 AMP J4 13.4 AMP J5 13.4 AMP J6 13.4 AMP

CGEE ALSTHOM SCA257 CONTROL BOARD.

LEXIUM 32 - SERVO VARIATEUR MODULAIRE RJ45 - TRIPHASE - 208V À 480V - 30A

SERVO AMPLIFIER MODULE 3.75 KW INPUT 283-325 VDC OUTPUT 3 PH 220VAC 12.5 AMP

SIMODRIVE 610 AC FEED DRIVE POWER CIRCUIT P.C.B; A28 8/16 A; 2 AXES

SIGNAL CABLE; PREASSEMBLED; FOR INCR.ENCODER WITH C/D TRACKS IN MOTOR 3X(2X0.14)C + 4X0;14 + 2X0.5 + 4X0.22 C WITH FULL THREAD CONNECTOR M23 MOTION CONNECT 800PLUS TRAILING TYPE UL/CSA DESINA DMAX = 9.8 MM; LENGTH (M) = TYPE: 6FX8002-2CA31 LENGTH (M) = + 0 + 0 + 8 + 0

WPM-311 MULTI-AXIS POSITIONING UNIT WPM 311.004-00

SIEMENS SIMODRIVE 210 6RB2130-0FD01

PC-666-0894 CONTROL BOARD IMC COMPACT MOTION CONTROLLERS

ALLEN BRADLEY 1394C-SJT10-A SERCOS INTERFACE SYSTEM MODULE; 360/480V AC; 10KW; PICK OUTPUT 15A; NO HIM; WITH ANALOG INTERFACE

ATV61H075N4 VARIATEUR ALTIVAR 61 0.75KW-1 HP 380-480V 50/60HZ

KEB COMBIVERT F4 AC INVERTER DRIVE 11KW 1600HZ 440VAC 24A 480VAC 21A

SINAMICS S120 SMART LINE MODULE INPUT: 3AC 380-480V; 50/60HZ OUTPUT: 600VDC; 17A; 10KW FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER MODULES PAINTED.

VARIATEUR 200V COURANT 7A PEAK 18A.

SUPPLEM.BOARD Z1004 F.6RA22 MP TECHNOLOGY BOARD W.8096; DPRAM WITHOUT (EPROM) SOFTWARE WITHOUT MOUNTING SET

SERVO DRIVE DBS04 CN5511HD

RAC SERVO SPINDLE DRIVE CONTROLLER SERIES:2; VERSION:2; RATED CURRENT:200A; AC SUPPLY VOLTAGE: 3 × AC 400V/50…60HZ;

GEC ALSTHOM DC DRIVE 8/16 AMP

AC FEED MOTOR; DC LINK 600 V 12NM; 100K; 3000 RPM NATURALLY COOLED; TG AND RLG; IP64 IM B5 (IM V1; IM V3) POWER AND SIGNAL CONNECTOR

SMARTSTEP SERVO DRIVE 230 VAC SINGLE-PHASE 400W 2.6 A

FANUC SERVO AMPLIFIER MODULE ALPHA SVM 2-80/80 9.5 KW

SINAMICS G120 BASIC OPERATOR PANEL (BOP-2)

MOVITRAC 2.8 KVA INPUT 3X380-500VAC 50/60HZ 3.5A OUTPUT 3X 0-500VAC 0-400HZ 4.0 A

LENZE DC SPEED CONTROLLER EVD 4904-E 4Q CONTROLLERS INPUT 3 PH 340-460 VAC 50-60 HZ 23 KW

PMC-2 SERVO POSITIONING CONTROLLER IP20 3 AC 400 V 2 AMPERES

SIGMA-II SERVO DRIVE 400 W INPUT 230 VAC SINGLE-PHASE 50-60 HZ 5.5 A OUTPUT 3PH 0-230 VAC 2.8 A..

SIMOREG K CONTROL BOARD C98043-A1600-L1

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER COMPACT UNIT; IP20 510-650V DC; 47 A NOM. POWER RATINGS: 22KW OPTION Z=

LEXIUM-VARIATEUR LXM28A CANOPEN 10E/5S-STO SIL2-ALIMENTATION 1/3PH 230VAC 200W

SINAMICS G120D POWER MODULE PM250D WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 1;5KW FOR 200% 3S;150% 60S;100% 300S AMBIENT TEMP -10 TO +55 DEG C 210 X 450 X 110 (HXWXD); FSA PROTECTION IP

BALDOR STÄUBLI BTS10 SERVO DRIVE BTS10-15/45-24-R-733

VARIATEUR 380/460V 5.8KVA 8A O 2.2KW 4.4 A.

PUPITRE OPÉRATEUR AVANCÉ - AOP MM420/MM440

SIMOTICS S SYNCHRONOUS MOTOR 1FT7; M0=6NM (100K) NN=3000RPM; PN=1.70KW NATURALLY COOLED; POWER CONNECTOR ROTATABLE; VIBRATION SEVERITY A DEGREE OF PROTECTION IP65 FRAME SIZE IMB 5 (IM V1; IM V3) CONVENTIONAL FLANGE (1FT6/1FK7 COMPATIBLE) ABSOLUTE ENCODER 24 BITS + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE (ENCODER AM24DQI) PLAIN SHAFT; WITH HOLDING BRAKE; ACCURACY TOLERANCE N

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH STANDARD; 2 AXES SIN/COS 1 VPP; NC SOFTWARE; REQUIRED FROM 06.04.09

UN VEFF : 240 / IMAX 1SEC : 46A / I NOM WITHOUT FAN 8;5A / SIZE 12TE

SIMODRIVE 611 POWER MODULE; 1 AXIS; 400 A; INTERNAL COOLING; ADD-ON FAN REQUIERD OR COOLING F. HOSE COOL. MOTOR RATED FEED = 140 A MAIN SPINDEL = 200 A

SIMODRIVE 611 INFEED/REGEN.FEEDBACK MODULE 36/47 KW; CLOSED-LOOP CONTROL; WITH INTERNAL COOLING; MAINS CONTACTOR WITH BREAK CONTACT..

MICROMASTER 420 A FILTRE INCORPORE CLASSE A TRIPH. 380-480 V +10/-10 % 47-63 HZ COUPLE CONSTANT 11 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 11 KW 245 X 185 X 195 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

DSQC679 : PUPITRE DE PROGRAMMATION POUR ROBOT ABB IRC5 REF : 3HAC 028357-001 TEACH PENDANT IRC5 - DSQC 679 - DSQC679.

BUG20 SERVO POWER SUPPLY UNIT INPUT 3X220VAC OUTPUT 310 VDC 120A;

ACS601-0060-3 - 45KW - ACS600 - AC DRIVE - INVERTER

LENZE 9300 SERVO INVERTER 0;37KW; 1;5A; 3PH; 50/60HZ; 400/480VPANEL?MOUNTED UNIT

SINAMICS G120 MODULES DE PUISSANCE PM250 A FILTRE INTEGRE CLASSE A A REINJECTION 3PH 380-480 V +10/-10% 47-63 HZ PUISS. SURCHARGE ELEVEE:15 KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE:18;5 KW A 150% 3S;110% 57S;10

CONVERTISSEUR CA/CC E: 3X 230V (+10:-15%) FN: 50/60HZ S: 300V (+10/-15%) IDMN 100A

PARKER / DIGIPLAN PDS13 MINISTEP DRIVE CURRENT RANGE: 0.9 TO 3 A

SERVO AMPLIFIER MODULE C SERIES 60A 5

SIMOVERT MASTERDRIVES CONTROL FOR PRECHARGING MODULE PCC FOR CONVERTER DESIGN E TO H

MICROMASTER MM75/3 UNFILTERED 3AC 380-500V +/-10% 50/60HZ CONSTANT TORQUE: 0.75 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

MICROMASTER 440 SANS FILTRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT CONSTANT 55 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 75 KW 850 X 350 X 320 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMOVERT MASTERDRIVES MOTION CONTROL INVERTER COMPACT-PLUS-UNIT; IP20 510-650V DC; 17.5A NOM. POWER RATINGS: 7.5KW DOCUMENTATION ON CD WITH Z OPTION Z=

INVERTER TRIGGERING MODULE IGD8 FOR UNITS 510-620V DC; 860A

SIMOVERT MASTERDRIVES RECTIFIER CHASSIS UNIT/IP00 3 380-480V AC; 50/60HZ;1023A

MENTOR II DC DRIVE 75 A REGEN MODEL THREE PHASE INPUT (208-460 VAC) DC ARM OUTPUT (240-500 VDC) FIELD OUTPUT (150-300 VDC) .