Conversione energia / energia

SIMOTICS S SYNCHRONOUS SERVO MOTOR 1FK7 COMPACT 3.0NM; 100K 3000RPM; 0.82KW NATURALLY COOLED IM B5 (IM V1; IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270° RESOLVER 2-POLE (RESOLVER P=1); SHAFT WITH FITTED KEY; TOLERANCE N; WITH HOLDING BRAKE DEGREE OF PROTECTION IP64

VARIATEUR DE FRÉQUENCE MX2; 0;4/0;55KW (CT/VT); 3;0/3;5A; 230VAC

VARIATEUR AC INTÉGRATOR 690+ EUROTHERM DRIVE 2.2KW TRI 400-460V 9.5A 50/60HZ

DKR03 DRIVE CONTROLLERS 3PH 400-480 VAC ±10%

DISJONCTEUR MODULAIRE MULTI 9; C60H; 2 PÔLES; 1A; COURBE C

MSK SYNCHRONOUS SERVO MOTORS SIZE 60 NATURAL CONVECTION MULTI-TURN ENCODER (HIPERFACE®); 128 SIGNAL PERIODS WITH 4;096 REVOLUTIONS ABSOLUTE WITH ELECTR. RELEASED HOLDING BRAKE

STANDARD ELECTRONIC BALLAST; INPUT VOLTAGE: 220 V – 240 V; LAMP TYPE: T5 (49 W); T5-ECO (49 W); LIFETIME (H): 60000

PARKER 690+ AC FREQUENCY INVERTER FOR 30KW (40HP) 400V 3 PH MOTOR TO 59A AT HIGH OVERLOAD OR 37KW (50HP) TO 73A WHEN FAN/PUMP RATED; OPERATES IN VXF; SENSORLESS FLUX VECTOR OR FULL CLOSED LOOP FLUX VECTOR CONTROL (WHEN THE OPTIONAL ENCODER BOARD IS FITTED). SIMPLE SET-UP AND READY TO RUN IN VXF FROM ITS DEFAULT SETTINGS.SIZE D - 252MM WIDE X 245MM DEEP X 471MM HIGH OVERALL.OVERLOAD - 150% X 60 SECONDS AND 180% FOR 0.5SECONDS.SWITCHING FREQUENCY - 3KHZ.SPEED CONTROL RANGE - 0/300HZ MAXIMUM.BRAKING - 100% X 20 SECONDS DUTY OR 33% CONTINUOUS INTO MINIMUM 21 OHM EXTERNAL RESISTOR. SEE THE RESISTOR OPTIONS LINKED BELOW OR USE THE 'WHICH RESISTOR' BUTTON ON THIS PAGE.4 X ANALOGUE INPUTS; 8 DIGITAL INPUTS; 3 ANALOGUE OUTPUTS; 3 DIGITAL OUTPUTS (RELAY CONTACTS).INPUT CURRENT - 66A AT HIGH OVERLOAD OR 84A WHEN FAN/PUMP RATING SET.INPUT VOLTAGE - 380/460V THREE PHASE +-10% AT 50/60HZ.INPUT FUSE - 80A AT HIGH OVERLOAD OR 100A WHEN FAN/PUMP RATING SET - TO SUIT INPUT BRIDGE AT 15000A²SWALL MOUNT IN CLEAN ENVIRONMENT OR CUBICLE MOUNT.RATED AT 40C AMBIENT.VENTILATION SPACE ABOVE AND BELOW - 70MM.VENTILATION SPACE AT SIDES - 25MM.HEAT LOSS AT MAX OUTPUT - 860W AT HIGH OVERLOAD OR 1030W WHEN FAN/PUMP RATING SET.MOUNTING - M6 SCREW FIXINGS ON 150MM X 440MM CENTRES.

SIMOTICS S SERVOMOTEUR SYNCHRONE 1FK7 COMPACT 6;0NM; 100K 3000TR/MIN; 1;48KW À REFROIDISSEMENT PAR CONVECTION NATURELLE IM B5 (IM V1; IM V3) CONNECTEUR DE PUISSANCE / DE SIGNAUX CONNECTEURS ORIENTABLES À 270° CODEUR INCRÉMENTIEL SIN/COS 1 VCÀC 2048 TRAITS/TOUR (ENCODEUR I-2048) ARBRE LISSE; TOLÉRANCE N SANS FREIN À L'ARRÊT INDICE DE PROTECTION IP64

MODELE (EPOWER) UNITE DE PUISSANCE A THYRISTORS QTE MODULE ET PUISSANCE (3PH-400A) UNITÉ 3 PHASES 400 AMTENSION (600V) 100V À 600V ALIMENTATION VENTILATEUR (230V) 230VAC OPTION (OO) OPTIONS / CODE QUICK START PROTOCOLE DE COMMUNICATION (ET) MODBUS TCP MODULE 1 (IO) OPTION CARTE E/S 1 LOAD MANAGEMENT (PLM) PREDICTIVE LOAD MANAGEMENT

MITSUBISHI MR-J2-60CT SERVO VARIATEUR MELDAS 0.6KW ENTRÉE: 3.2A 3PH 200-230V 50/60HZ SORTIE: 3.6A 3PH 170V 0-360HZ

PARKER AC650 SERIE 0.75 KW 4.0 AMP MONOPHASÉ 220-240 VAC (+10 %) 50 HZ (+5 %)

VARIATEUR DE FRÉQUENCE; SÉRIE VFD-EL; 3 PHASES 1.5 KW; 400 ? 460 V C.A.; 4.2 A. CLAVIER DIGITAL INTÉGRÉ- CIRCUIT FREINAGE NON INTÉGRÉ

ALIMENTATION À DÉCOUPAGE; COSEL 151W; 1 SORTIE À 24V C.C. 6.3A

SANS FILTRE 3AC380-480V+10/-10% 47-63HZ COUPLE CONSTANT 1;5KW SURCHARGE DE 150% PENDANT 60S COUPLE QUADRATIQUE 1;5KW 173X 73X 149 (HXLXP) DEGRÉ DE PROTECTION IP20 TEMPÉRATURE AMBIANTE -10+50°C SANS AOP/BOP

SIMODRIVE 611 UNIVERSAL E HR 2-AXES CLOSED-LOOP CONTROL INCREMENT. ENCODER SIN/COS 1VPP ABSOLUTE VALUE ENDAT SPEED/ROTATIONAL-SPEED TORQUE SETPOINT REQUIRED OPTION MOTION CONTROL WITH PROFIBUS DP (V2) 6SN1114-0NB01-0AA0

POWERFLEX 40- 0.4 KW (0.5 HP) AC DRIVE

MTSUBISHI MR-J2S-10B 220VAC 400W AC SERVO DRIVE POSITIONNEMENT INTEGRE

A20B-3900-0163 CARTE FANUC FROM 32MB SRAM 1MB

WEIR POWER SUPPLY SMM100/15A24

DIGIDRIVE SK 2M/TL - 1;1KW - 1;5HP

R88D-UA20V AC SERVO DRIVER 750 W 1 PH 200 – 230 VAC 50/60HZ

UNINTERRUPTIBLE POWER SUPPLY 24 V DC/10 A; WITH INTEGRATED 1.3 AH BATTERY MODULE. IN THE DOWNLOAD AREA; THERE IS A CLEARLY ARRANGED SELECTION TABLE AVAILABLE WITH LOAD CURRENTS AND BUFFER TIMES; AS WELL AS CHARGING TIMES AFTER BUFFER MODE

UPS MODULE FOR UNINTERRUPTIBLE POWER SUPPLY OF THE CX CONTROLLER

SIMOVERT MASTERDRIVES RECTIFIER CHASSIS UNIT/IP00 3 380-480V AC; 50/60HZ; 605A

TYPE MC - SERIE AND GENERATION 07 - VERSION A - RECOMMENDED MOTOR POWER : 1;1KW - CONNECTION VOLTAGE : 380…500VAC - RADIO INTERFERENCE SUPPRESION A - 3 PHASE - QUADRANTS : 4Q (WITH BRAKE CHOPPER) - TYPE : STANDARD

SIGNAL CABLE; PREASSEMBLED TYPE: 6FX5002-2DC10 (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67; WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 0 + 0 + 5 + 0

INTERFACE I/O DC POWER BUS MV3000

10HP 7.5KW 18AMP 380/400/415VAC 3PHASE

DC514C SERIES ANALOG 4-QUADRANT DC DRIVES OFFER 4 AMP

SINAMICS G120D POWER MODULE PM250D WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 7;5KW FOR 200% 3S;150% 60S;100% 300S AMBIENT TEMP -10 TO +55 DEG C 210 X 450 X 220 (HXWXD); FSC PROTECTION IP

MIDIMASTER VECTOR MDV750/3 3AC 380-500V +/-10% 50/60HZ CONSTANT TORQUE: - OVERLOAD 150% 60SEC; 200% 3SEC VARIABLE TORQUE: 11 KW 450 X 275 X 210 MM (H X W X D) PROTECTION IP21 NEMA 1 AMBIENT TEMPERATURE 0-40 DEG C

CARTE DE REGULATION

SIMODRIVE 610 AC FEED DRIVE; SETTING MODULE; 1 AXIS

VARIATEUR PUISSANCE (2 PH.) 400V~ 40KW

AC SERVO DRIVE CONTROLLER TDM1.2-30-300-W0

MEMORY MODULE MS301 FOR T300 BLANK; NEEDED FOR INDIVIDUAL CONFIGURATION W. STRUC. SEE DA99. NOT NEEDED FOR STANDARD CONFIGURATION ON MEMORY MODULE MS3**

"SINAMICS G110 - CPM110 ENTR. CA; A FILTRE INTEGRE B 1PH 200-240 V +10/-10% 47-63 HZ INTERFACE RS485 (PROT. USS) CT: 0;37 KW; VT: 0;37 KW SURCHARGE CT:150 % 60 S 150X90 X 116 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS BOP SANS"

TRACO POWER SUPPLY 5V 8A 12V 4A

MICROMASTER 440 SANS FILTRE 3AC 200-240 V +10/-10% 47-63 HZ MOMENT CONSTANT 5.5 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 7.5 KW 245 X 185 X 195 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

MICROMASTER 430 AVEC FILTRE CLASSE A INTEGRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT QUADRATIQUE 22 KW SURCHARGE 110% 60 S; 140% 3 S 520 X 275 X 245 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +40 DEG. C SANS AOP/BOP

MICROMASTER 440 WITH BUILT-IN CLASS A FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 3 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP

MICROMASTER 440 SANS FILTRE 3PH 380-480 V +10/-10% 47-63 HZ COUPLE CONSTANT 132 KW SURCHARGE 136% 57 S; 160% 3 S COUPLE QUADRATIQUE 160 KW 1533 X 326 X 545 (H X L X P) DEGRE DE PROTECION IP20 TEMP. AMB. 0-40 DEG. C SANS AOP/BOP

MICROMASTER 440 WITHOUT FILTER 3AC 380-480 V 10/-10% 47-63 HZ CONSTANT TORQUE POWER 1.5 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 1.5 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO 50 DEG. C WITHOUT AOP/BOP

MICROMASTER 430 WITH BUILT-IN CLASS A FILTER 3AC 380-480 V +10/-10% 47-63 HZ SQUARED TORQUE POWER 45 KW OVERLOAD 110% 60 S; 140% 3 S 650 X 275 X 245 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +40 DEG. C WITHOUT AOP/BOP

MICROMASTER 440 WITHOUT FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 200 KW OVERLOAD 136% 57 S; 160% 3 S SQUARED TORQUE POWER 250 KW 1533 X 326 X 545 (H X W X D) PROTECTION IP20 AMBIENT TEMP. 0 TO +40 DEG. C WITHOUT AOP/BOP

MICROMASTER 420 UNFILTERED 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 7.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

MICROMASTER 4 BRAKING RESISTOR 380-480 V 160R 4000W PK 200W CONT. 239X 149X 43.5 MM HXWXD IP20

CARTE EXTERNE DE COMMUNICATION PROFINET POUR VARIATEUR SEW

SIRIUS SOFT STARTER; SIZE S00; 6.5A; 3KW/400V; 40 DEGREES; 200-480V AC; 24V AC/DC; SPRING-LOADED TERMINALS

SIRIUS SOFT STARTER; SIZE S2; 45 A; 22 KW / 400 V; AC 200...460 V; UC 24 V; SCREW CONNECTION

SIRIUS DEMARR. PROGR.; S00; 9A; 4KW/400V; 40DEG.; 200...480V CA;110...230V CA/CC; BORNES A VIS

SIRIUS SOFT STARTER; SIZE S2; 38 A; 18.5 KW / 400 V; AC 200...460 V; UC 110...230 V; SCREW CONNECTION

MBLD1 VARIATEUR DE BROCHE COMPACT 75 A

SIRIUS DEMARREUR PROGRESSIF; VALEURS A 400V; 40 DEG.; STANDARD: 615A; 355KW; RACINE DE-3: 1065A; 630KW; 200-460V CA; 230V CA; BORNES A VIS

SIRIUS DEMARREUR PROGRESSIF; VALEURS P. 400V; 40 DEG; STANDARD: 57A; 30KW; RACINE DE-3: 99A; 55KW; 200-460V CA; 230V CA; BORNES A VIS

CONTROL BOARD

HDS SERVO DRIVE CONTROLLER LINE:02; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 40A; OTHER VERSIONS: NONE; CONTROLLER FAMILY: DIAX04; SERCOS INTERFACE; FUNCTION ID CODE: 32; VERSION OF FUNCTION ID: 01; FIRMWARE: MUST BE ORD

SINAMICS G120C PUISSANCE ASSIGNEE 2;2KW AVEC SURCHARGE DE 150% POUR 3 SEC 3AC380-480V +10/-20% 47-63HZ FILTRE INTEGRE CLASSE A INTERFACE I/O: 6DI; 2DO;1AI;1AO SAFE TORQUE OFF INTEGRE BUS DE TERRAIN INTEGREE: PROFINET-PN; DEGRE DE PROTECTION IP20/ UL OPEN TYPE TAILLE FSA 196X73X225;4 (HXLXP) EXTERNE 24V.

SINAMICS DCM DC CONVERTER FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 232A CONTROLLABLE FIELD RECTIFIER D420/280 MREQ-GEGF6V62 OUTPUT: DC 420V; 280A

SIMOREG K CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6)A(B6)C; 3-PHASE; AC 500V CONTROLLABLE FIELD RECTIFIER D520/140A MREQ-GEG 6V62

LENZE VECTOR 8200 E82EV152K4C000 OUT: 3/PE AC 0-400/500V 3;9 A/3;1A 1;5KW 2.0HP 0-650HZ

POWERFLEX 753 AC DRIVE; WITH EMBEDDED I/O; AIR COOLED; AC INPUT WITH PRECHARGE; NO DC TERMINALS; OPEN TYPE; 125 AMPS; 100HP ND; 75HP HD; 480 VAC; 3 PH; FRAME 6; FILTERED; CM JUMPER REMOVED; NONE; BLANK (NO HIM)

MITSUBISHI MDS-B-CV-185 ALIMENTATION MDS 15 KW

SPEED CONTROLLERS 530 SERIES DC 200V 2A

UV105 POWER SUPPLY UNIT FOR MC/CC ID NR 344 980 13

MOVITRAC B 400V 3-PHASE 0.75 KW / 1.0 HP OUTPUT AC 2.4A SIZE 0S

4.0KW

DKC ECODRIVE DRIVE CONTROLLER: SERIES 02; VERSION 3; TYPE CURRENT: 200A; VOLTAGE RATING: DC 700V; FIRMWARE: STANDARD

AS-I STROMVERSORG

DEPART-MOT. COMP. AS-I; IP65 DEPART-MOTEUR DIR. ELECTROMEC. PLAGE DE REGLAGE 2;2...3;2A; AC-3; 1;1 KW/400V SANS CONTACT DE FREINAGE; AVEC SORTIE MOTEUR 9 POINTS ET CONNEXION ALIMENTATION 9 PTS AVEC 2 ENTREES INTEGREES

DISJONCTEUR DE LIGNE 230/400V 4;5KA; 1 POLE; C; 13A; P=70 MM

CIRCUIT-BREAKER VL 630N WITHOUT OVERCURRENT RELEASE STANDARD SWITCHING CAPACITY ICU= 45 KA / 415 V AC 3-POLE IN= < 630 A; RATED CURRENT WITHOUT AUXILIARY RELEASE WITH SCREW CONNECTIONS FOR CONTACT UNIT AND OVERVOLTAGE RELEASECIRCUIT-BREAKER VL 630N W

620 VECTOR LINK SERIE 380V/460V 3PH SORTIE 9.4A 4 KW

SIMOVERT P MICROMASTER 3-PH. 380-500V 50/60HZ; MM150/3 RATED OUTPUT 1.5KW WEIGHT 5KG

DISJONCTEUR TAILLE S0; POUR PROTEC. MOTEUR; CLASSE 10; DECL_A 4;5A...6;3A; DECL_N 82A; BORNES A VIS; POUVOIR DE COUPURE STANDARD

VARIATEUR D'AXE DIAX 01

DIGITAL AC SERVO MOTOR MKD071B-061-GP1-KN MOTOR SIZE 071 RESOLVER FEEDBACK (RSF) SHAFT WITH KEYWAY WITHOUT BRAKE

POWER CONTACTOR; AC-3 25 A; 11 KW / 400 V 1 NO + 1 NC; 230 V AC; 50 HZ 3-POLE; SIZE S0 SPRING-TYPE TERMINAL

INVERTER 3PH 15KW 20HP 32A 50/60HZ

CONTACTEUR

CONTACTOR; AC-3 37 KW/400 V; AC 230 V; 50 HZ; 2 NO + 2 NC 3-POLE; SIZE S3; SCREW CONNECTION

CONTACTOR; 132KW/400V/AC-3 AC(50...60HZ)/DC OPERATION UC 220-240V AUXILIARY CONTACTS 2NO+2NC 3-POLE; SIZE S10 BAR CONNECTIONS CONVENT. OPERATING MECHANISM CAGE CLAMP TERMINAL

CONTACT. AC-3 4 KW/400 V; AC 110 V; 50/60HZ; 3 POLES; TAILLE S0; SERRE-FILS;

POWER CONTACTOR; AC-3 12 A; 5.5 KW / 400 V 24 V DC; 0.7-1.25* US WITH VARISTOR 3-POLE SIZE S0

8200-SERIES MOTEC FREQUENCY INVERTER; WITH INTEGRATED INTERFERENCE SUPPRESSION MEASURES; MAINS CONNECTION 3 X 400 / 500 V; RATED POWER: 1.5 KW

CONTACTOR; AC-3; 22KW/400V DC 24V; 0.7...1.25*US; 3-POLE SIZE S2; SCREW CONNECTION WITH SOLID-STATE CONTROL BLOCK VARISTOR INTEGRATED

CONTACT.; AC-3 5;5 KW/400 V; DC 24 V; TRIPOLAIRE; TAILLE S0; RACCORDEMENT PAR VIS

CONTACT.; AC-3 4 KW/400 V; 1NO; AC 24 V; 50/60 HZ; TRIPOLAIRE; TAILLE S00; RACCORDEMENT PAR VIS

EM 300 EDS; FOR ET 200 X; ELECTRONIC DIRECT STARTER; SETTING RANGE 0.6...2.18A AC-3; 0.18...0.75KW/400V; WITHOUT BRAKE CONTACT; W. 9-POLE POWER CONNECTION; MIN. DISCONNECTION TIME 1S

DS FOR ET 200S ELECTRO-MECH. DIRECT STARTER; SETTING RANGE 1.4...2A

ECOFAST REVERSING STARTER PROFIBUS-DP MECHAN.-ELECTR. AC-3; UP TO 1;1 KW/400 V 0;30 A UP TO 3;00 A WITHOUT BRAKE CONTACT DIGITAL INPUT DI 2 X DC 24V PLASTIC HOUSING

ET 200PRO RSE HF REVERSING STARTER HIGH FEATURE MECH. SWITCHING; ELECTRO. UE PROTECTION; 3PH 400 V/0.9KW; 0.15A...2.00A WITHOUT BRAKE CONTACT 4DI 24 V DC; HAN Q4/2 - HAN Q8/0

DSS1E-X FOR ET 200S HIGH FEATURE LINE SOFTSTARTER SETTING RANGE 2.4...8A; ELECTRONIC SWITCHING ELECTRONIC CONTACTORS AC-3; TO 3 KW/400V ; EXPANDABLE FOR BRAKE CONTROL MODULE FOR 2DI CONTROL MODULE

VARIABLE SPEED DRIVE ATV61 - 18.5KW 25HP - 380...480V - IP20