SIMATIC S7 LEUKHARDT

SIMATIC S7-200; DIGITAL OUTPUT EM 222; OPTICALLY ISOLATED 8DQ; 24 V DC; 0.5A FOR S7-21X CPU ONLY

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD.

SIMATIC S7; MEMORY CARD FOR S7-300; SHORT VERSION; 5V FLASH EPROM; 32 KBYTES

SIMATIC DP; ELECTRONIC MODULE ET 200S: 2AI RTD HIGH FEATURE; 15 MM WIDTH; 15BIT + SIGN ACCURACY +/- 0.1%; FOR 2-/3-/-4- WIRE SENSORS; WITH INTERNAL COMPENSATION OF THE WIRE RESISTOR; WITH LED SF (GROUP FAULT).

SIMATIC S7-300; CPU 314 CPU WITH INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; POWER RAIL BOOSTER SIGNAL AMPLIFIER FOR TRANSMITTING THE PROTOCOL OF PROFIBUS-DP USING COLLECTOR WIRES; MAX 500 KBIT/S

SIMATIC S7; PC ADAPTER F. CONNECTION OF PC W. C7; M7; S7-300(W/O FM353/354/357)/-400; FOR PC W/O FREE SLOT WITH RS232/RS485 CONVERSION

SIMATIC S7-400; SM 421 DIGITAL INPUT MODULE; OPTIC. ISOLATED; 32 DI; 24V DC

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH MPI; 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 24 KBYTE WORKING MEMORY

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 8 DI DC 24 V; SINK/SOURCE; 8 DO DC 24V; 0.75A/POINT SOURCE

SIMATIC S7-300; CPU 314 CPU W.MULTI POINT INTERFACE MPI INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC DP; TERMINAL MODULE TM-P15S23-A0 FOR ET 200S FOR POWER MODULES 15 MM WIDE;SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 INTERRUPTED.

SIMATIC S7-300 CPU 319-3 PN/DP; CENTRAL PROCESSING UNIT WITH 1;4 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; 3. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY.

SIMATIC DP; 5 TERMINAL MODULES TM-E15S24-A1 FOR ET 200S FOR ELECTRONIC MODULES 15 MM WIDE;SCREW-TYPE TERMINALS 2X4 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE; 5 PIECES PER PACKAGING UNIT

SIMATIC DP;BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE; 15;8 X 59 X 35;6 MM (WXHXD); IPCD TECHOLOGY FAST CONNECT; WITH PG SOCKET

SIMATIC S7; MEMORY CARD FOR S7-400; LONG VERSION; 5V FLASH-EPROM; 4 MBYTES

SIMATIC SC;ELECTRONIC SUBMODULE 2 DI; 24 V DC; 8 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 SI SERIAL INTERFACE ONE CHANNEL; 15MM WIDE RS232/422; 485 ASCII; 3964R

SIMATIC S7-300; CONNECTING CABLE BETWEEN IM 360/IM 361 LENGTH: 2.5M.

SIMATIC DP; ELECTRONIC MODULE DIGITAL; FOR ET 200B; W=235MM; 24DI 24V DC; 8DO 24V DC; 0.5A 3 MS INPUT DELAY

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: 24 V DC/10 A

SIMATIC S7-300; FUNCTION MODULE FM 353; FOR POSITIONING WITH STEPPER MOTOR; MODULE EXCHANGE W/O PG; PREQUISITE STEP7 V3.1 INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300; CPU 313 CPU WITH INTEGRATED 24V DC POWER SUPPLY 12 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 317F-2DP; CENTRAL PROCESSING UNIT WITH 1024 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.2 SP1 AND HIGHER

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16 DI; AC/DC 24 - 48V WITH ONE CHANNEL PER COMMON; 1 X 40 PIN

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD

SIMATIC S7-400H; CPU 414H CENTRAL UNIT FOR S7-400H AND S7-400F/FH; 4 INTERFACES: 1 MPI/DP; 1 DP AND 2 FOR SYNC MODULES; 1.4 MB MEMORY (700 KB DATA/700 KB CODE)

SIMATIC S7-400; CPU 417-4 CENTRAL PROCESSING UNIT WITH: 20MB WORKING MEMORY; (10 MB CODE; 10 MB DATA) 1. INTERFACE MPI 12 MBIT/S; 2. INTERFACE PROFIBUS DP; 3./4. IF IFM MODULES PLUGGABLE

SIMATIC S7-400; IM461-0 RECEIVER INTERFACE MODULE; FOR CENTRALIZED CONNECTION W/O PS TRANSMISSION; WITH K BUS

SIMATIC S7-400; IM463-2 TRANSMITTER INTERFACE MODULE FOR DISTRIBUTED CONNECTION TO SIMATIC S5 EXPANSION MODULES VIA IM314; UP TO 600 M

SIMATIC S7-300; CPU317-2 DP; CENTRAL PROCESSING UNIT WITH 1 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG DESIGN; 8 MBYTE

SIMATIC S7; MICRO MEMORY CARD P. S7-300/C7/ET 200; 3.3 V NFLASH; 2 MBYTES

SIMATIC S7; I/O MODULE FOR EXPANSION OF C7-633; C7-634; C7-623/P; C7-624/P; C7626/P;C7626/P DP TO 16DI; 16DO; 4AI; 4AO; 4 UI

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

SIMATIC C7-623/P; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU314;SIMATIC OP5;IM360 16 DI; 16 DO; 4 AI; 4 AO; 4 UI

SIMATIC S7-300; SIGNAL. MODULE FOR 3 SSI SENSORS FOR READ-IN OF POSITIONING VALUE WITH 2 FREEZE INPUTS ; 1 X 20 PIN; SUPPORTS ISOCHRONE MODE

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; POWER MODULE PM-E F PROFISAFE; FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849); 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET-NETWORKS W. IM151-3 HF

SIMATIC DP; DISTRIBUTED I/O ET200X: EXPANSION MODULE EM141 8 DE DC 24V; 5-PIN M12 CHANNEL DIAGNOSTICS SHORT-CIRCUIT AND WIRE BREAK PROCESS INTERRUPTS INPUT DELAY:0;5MS/3MS/15MS/20MS

SIMATIC DP; ELECTRONIC MODULE FOR ET200PRO; 4 DO DC 24V; 2.0A; MODULE DIAGNOSTICS; INCLUSIVE BUS MODULE; CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY

SIMATIC DP; ELECTRONIC MODULES FOR ET200PRO 4 AO U HIGH FEATURE; +-10V; 0...10V; 1...5V; CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AE; +/-5/10V; 1-5 V; +/-20MA; 0/4 TO 20MA; 16 BIT (55 MS); 1 COMMON POINT(50 V COM.); 1 X 40 PIN

SIMATIC S7-400; CPU 413-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE 72 KB WORKING MEMORY

SIMATIC S7; DIAGNOSIS-REPEATER FOR PROFIBUS DP; FOR ONLINE PROFIBUS CABLE DIAGNOSTICS; DP-STANDARD SLAVE TO 12MBIT/S; DEGREE OF PROTECTION IP20; FAST-CONNECT TECHNOLOGY

PLC MODUS MODULE CP341 CLÉ ÉLECTRONIQUE MODBUS POUR CP341 / CP 441 (DONGLE)

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT.

SIMATIC DP; MODULE DE BUS POUR ET 200M POUR LE MONTAGE DE 2 IM153-2 RED. POUR FONCTION DÉBROCHAGE ET EMBROCHAGE PENDANT LE FONCTIONNEMENT (RUN) ECCN:9N9999

SIMATIC ET 200SP; MODULE DE SORTIE TOR; DQ 4X24VCC/2A STANDARD; ADAPTE A TYPE BU A0; CODE DE COULEUR CC02; DIAGNOSE DE MODULE

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG VERSION; 1 MBYTE

SIMATIC S7-1200; DIGITAL INPUT SM 1221; 16 DI; 24VDC; SINK/SOURCE INPUT

SIMATIC SC; TERMINALBLOCK TB16IM-SC FOR IM-SC; WITH SCREW-TYPE TERMINALS

SIMATIC DP; ELECTRONIC MODULE ET 200S: 2 AI HIGH SPEED U; 15 BIT; 15 MM WIDE; CYCLE TIME OF MODULE: 0.1MS; WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI TC 15 MM WIDE; 15 BIT + SIGN +/-80MV; CHARACTERISTICS LINEARIZATION FOR THERMOELEMENTS OF: B; E; J; K; L; N; R; S; T TYPES; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECT. SUBMODULE FOR ET200ISP; 4 AO HART; 4 - 20MA; FOR CONNECTION OF HART FIELD DEVICES

SIMATIC S7-200; ANALOG INPUT EM 231; FOR S7-22X CPU ONLY; 2AI; PT100/200/500/1000/10000 NI100/120/1000; CU10; RESISTANCE 150/300/600 OHM 15 BIT + SIGN.

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AE; +/-5/10V; 1-5 V; +/-20MA; 0/4 TO 20MA; 16 BIT; 1 COMMON POINT(60 V COM.); 4 CHANNEL MODE: 10 MS; 8 CHANNEL MODE: 23-95 MS; 1 X 40 PIN.

SIMATIC S7-300; ANALOG INPUT SM 331; OPT. ISOL.;2/3/4 WIRE; 8AI; RESISTANCE; PT100/200/1000 NI100/120/200/500/1000; CU10; 16 (INTERN 24) BIT; 50MS;40 PIN

SIMATIC DP; ET 200ECO PN; 16 DI 24V DC; 8 X M12; DOUBLE-ASSIGNEMENT; DEGREE OF PROTECTION IP67

SIMATIC S7-300; CPU 314C-2 DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 192 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-1500; CPU 1516-3 PN/DP; CENTRAL PROCESSING UNIT WITH WORK MEMORY 1 MB FOR PROGRAM AND 5 MB FOR DATA; 1ST INTERFACE: PROFINET IRT WITH 2-PORT SWITCH; 2ND INTERFACE: PROFINET RT; 3RD INTERFACE: PROFIBUS; 10 NS BIT PERFORMANCE; SIMATIC MEMORY CARD REQUIRED

SIMATIC DP; BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET; 15;8 X 54 X 39;5 MM (WXHXD); TERMINAT. RESIST. WITH ISOLAT. FUNCTION; WITH PG SOCKET

SIMATIC S7-300;INTERFACE MODULE IM 361 IN EXPANSION RACK FOR CONNECTING TO CENTRAL RACK (IM360);24 V DC SUPPLY VOLTAGE; WITH K-BUS

SIMATIC S7-200; CPU 226 COMPACT UNIT; AC POWER SUPPLY 24 DI DC/16 DO RELAY; 16/24 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER; ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D INCL. TERMINATING MODULE

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3;3 V NFLASH; 64 KBYTES

SIMATIC S7-400; CPU 416-2 CENTRAL PROCESSING UNIT WITH: 5.6 MB WORKING MEMORY; (2.8 MB CODE; 2.8 MB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP

SIMATIC DP; TB16L TERMINAL BLOCK; 16 CHANNELS FOR ET 200L SCREW-TYPE TERMINAL

SIMATIC DP; ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; TIME STAMPING FIT FOR ISOCHRONE MODE

SIMATIC DP; ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; TIME STAMPING FIT FOR ISOCHRONE MODE

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; U/I/THERMOCOUPLE/RESISTANCE INTERRUPT; DIAGNOSTICS; RESOLUTION 9/12/14 BITS; 8AI; REMOVE/INSERT W. BACKPLANE BUS 20 PIN

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO (RELAY); 1 X 40 PIN; 24V DC; 5A OR 230V AC; 5A; CONNECTOR W.SPRING TERMINAL CAN BE USED FROM 6ES7392-1BM01-0AA0

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AO I 15 MM WIDE; +/-20 MA; 13 BIT + SIGN; 4 . .20 MA; 13 BIT CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT).

SIMATIC S7; ANALOG INPUT SM336 6 AI; 15 BIT; FAILSAFE ANALOG INPUTS FOR SIMATIC SAFETY; WITH HART SUPPORT; UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); 1 X 20 PIN

SIMATIC S7-200; DIGITAL OUTPUT EM 222; FOR S7-22X CPU ONLY; 8DO; (RELAY OUTPUTS) 2A.

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AI; 13 BIT RESOLUTION; U/I/RESISTANCE/PT100; NI100; NI1000; LG-NI1000; PTC / KTY; 66 MS MODULE UPDATE; 1 X 40 PIN

SIMATIC S7-300; RAIL L=530MM

SIMATIC S7;CONNECTING CABLE FOR HMI ADAPTER AND PC/TS ADAPTER; (RS232 / ZERO MODEM CABLE); 6 M

SIMATIC S7-400; CPU 416-2 1.6 MB WORKING MEMORY (0.8 MB CODE; 0.8 MB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2. INTERFACE DP

SIMATIC S7-400; FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACT; 48-POLE

SIMATIC DP; ET 200M INTERFACE IM 153-4 PN IO HIGH FEATURE FOR MAX. 12 S7-300 MODULES; SUPPORTS FAIL SAFE MODULES; HART MODULES SHARED DEVICE; MEDIUM REDUNDANCY PROTOCOL.

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 16 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO STANDARD DC 24V/0.5A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC S7-200; ANALOG INPUT EM 231; FOR S7-22X CPU ONLY; 4 AI; 0 - 10V DC; 12 BIT CONVERTER.

SIMATIC S7-300; CP 341 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7; TEXT DISPLAY FOR S7-200; 2 LINES WITH CABLE (2.5M) A.MOUNTING ACCESS. EAN: 4025515160403.

SIMATIC S7-400; UR2 RACK; CENTRALIZED AND DISTRIBUTED WITH 9 SLOTS

SIMATIC DP; 5 ELECTRON. MODULES ET200S: 2DO RELAY(FORM C CONT.) DC24V-48V/5A; AC24V-230V/5A; 15 MM WIDTH; FIRST-UP SIGNAL; 5 PIECES PER PACKAGING UNIT.

SIMATIC S7-200; CPU 216 COMPACT UNIT; AC POWER SUPPLY 4K PRG/2;5K DW;24DI DC/16DQ RLY 2 PPI/FREEPORT PORTS

SIMATIC SC;ELECTRONIC SUBMODULE 2 AI; 4..20MA; +/-20MA.

SIMATIC DP; TERMINAL MODULE TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE

SIMATIC DP; CONNECTING BLOCK M12; 7/8" FOR ET200ECO; 2 X M12 AND 2 X 7/8"; 2 ROTARY CODING SWITCH FOR PROFIBUS-DP; ADDRESS SETTING

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 4 DI / 4 DO RELAY; 5-30 V DC; 250 V AC

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16DI; 24 V DC; 20 PIN

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 2 AI; 9/12/14 BITS RESOLUTION; U/I/THERMOCOUPLE/RESISTANCE; ALERT; DIAGNOSTICS; 1 X 20 PIN; REMOVE/INSERT W. BACKPLANE BUS.

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200; 3.3 V NFLASH; 64 KBYTES.