HMI / Display

SIMATIC PANEL PC 677 15" TACTILE; 1024X768; AV. INTERFACE USB EN FACE AVANT 110-230V CA CABLE RESEAU EUROPE PENTIUM M770/1;6 GHZ; BUS FR. 533 MHZ; CACHE 2 MO; SDRAM 512 MO DDR266 (1X512MO); DISQUE DUR 160 GO SATA 3;5" DVD+-RW+-R; WINDOWS XP PROF MUI (ANG;ALL;FR;IT;ES;JAP;CHIN;COR)

BOSCH IPC04FWINCE2 OPERATOR PANEL

SIMATIC PANEL PC 677B 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE 2 DUO T7400; 2.16 GHZ; 4 MB SLC; 2XPCI 2 GB DDR2 RAM; 160 GB SATA HDD 3.5" DVD+-R+-RW; PROFIBUS/MP; 2MB BUFF. SRAMI; WINDOWS XP PROF. MUI (DE;EN;FR;ES;IT;JA;ZH;KO); ONLY WITH HARD DISK

SIMATIC PANEL PC 677B 2X ETHERNET 10/100/1 000 MBIT/S; 4X USB V2.0; 1X EN SÉRIE (COM1); 15" TACTILE; 1024X 768 AVEC INTERFACE USB BLOC D'ALIMENTATION 110/230V CA AVEC NAMUR; CÂBLE D'ALIMENTATION EUROPE CORE 2 DUO T7400; 2;16 GHZ; SLC 4MO; 2XPCI 2 GO DDR2 RAM; 160 GO HDD SATA 3;5" SANS LECTEUR OPTIQUE PROFIBUS/MPI;2MO SRAM AV.TAMPON SANS SYSTÈME D'EXPLOITATION

PANELVIEW PLUS 7 PERFORMANCE COLOR TERMINAL; TFT 12.1-INCH TOUCH SCREEN; WIDESCREEN 1280 X 800 WXGA; 18-BIT COLOR GRAPHICS; WIDE ASPECT RATION COLOR 16:10; SINGLE ETHERNET DLR PORT; 24V DC POWER (18-30V DC)

SIMATIC PANEL PC 677; 15" TOUCH; 1024X768; STAINLESS ; STEEL FRONT F. NUG; W/O FRONT SIDE USB INTERFACE AC110-230V; POWER CABLE; EUROPE PENTIUM M770/1.6 GHZ; 533 MHZ FSB; 2MB SLC; 512MB DDR266 SDRAM ; (1X512MB); 80 GBYTE SATA HARD DRIVE 3;5" DVD-ROM

KANNEGIESSER OPERATOR PANEL 357.235/1 IBT - BASIC

SIMATIC IPC 477D; ÉCRAN 19" TACTILE; 4 USB (ARRIÈRE)+1 USB (AVANT); ETHERNET (10/100/1000) CORE I3-3217UE ; ETHERNET 2 GBIT (IE/PN) ; 4 GO ; 1X RS-232 ; SANS PCIE ; WINDOWS 7 ULTIMATE; 64 BITS ; SANS LECTEUR REMPLAÇABLE ; SSD 240 GO STANDARD (MLC) ; SANS LOGICIEL SIMATIC ; BLOC D'ALIMENTATION INDUSTRIEL CA 110/230 V AVEC NAMUR; CÂBLE D'ALIMENTATION POUR EUROPE

OPERATOR PANEL

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 SOLO 1;2 GHZ; PROFINET (IE); 2X 1GBIT; PROFIBUS-DP 12 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 4 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 128 PT; (AVEC ARCHIVES ET RECETTES); WIN AC RTX

PANELVIEW PLUS 6. LOGIC MODULE. 512MB RAM. 512 MB FLASH. ETHERNET. RS-232. EXTENDED FEATURES AND FILE VIEWERS. 24V DC

ADVANTECH FPM-3151G-R3AE LCD DISPLAY 15" MONITOR

SIMATIC PANEL OP177B PN/DP STN 256 COLOR DISPLAY TOUCH AND KEYS MPI-/PROFIBUS-DP PROTOCOL RS485-/RS422-/USB- INTERFACE ETHERNET - INTERFACE PRINTER INTERFACE SLOT FOR MM-CARD CONFIGURABLE WITH WINCC FLEXIBLE 2005

SIMATIC PANEL PC 677/877 COMPLETE SPARE FRONT; 15" TFT ROHS W. MEMBRANE KEYS AND MOUSE ROHS-COMPATIBLE FRONTUNIT FOR UNITS WITH PRODUCTIONDATE FROM 07/2006

MONITEUR 8;4"

CHESSELL INDICATOR PANEL INPUT : LOGICA 24V (+)DISPLAY : LATCH\9999POWER : 230V 50/60HZ

SIMATIC PANEL PC 677 15" TOUCH; 1024X768; WITH FRONT SIDE USB INTERFACE AC110-230V; POWER CABLE EUROPE PENTIUM M760/2.0 GHZ; 533 MHZ FSB; 2MB SLC; 512MB DDR266 SDRAM (1X512MB); 80 GBYTE SATA HARD DRIVE 3;5" DVD+-RW+-R; WINDOWS 2000 PROF MUI (EN;GE;FR;IT;SP;JP;CHN;KOR)

AGP 3000 SERIE OPERATOR PANEL AGP3301-L1-D24

PCS733 PC-PCS LAUER PROGRAMMER CABLE PCS AND LCA STARLINE/PC (MSDOS)/RS232.

ALLEN-BRADLEY 2711-K5A15 PANELVIEW 550 MONOCHROME TERMINAL 5.5-INCH; KEYPAD; CONTROLNET COMMUNICATION & RS-232 PRINTER PORT; AC POWER

HARMONY HMIGTU - ÉCRAN TACTILE MULTITOUCH HAUTE RÉSOLUTION - 12;1P - XGA

PROFACE GP3000 SERIES AGP3750-T1-AF 15 INCH (306.2 X 230.1) COLOUR TFT TOUCH PANEL RESISTIVE FILM (ANALOG) AC 100-240 V REF 3280024-01

6AV6642-5DC10-1AC0 - SIMATIC PANEL OP177B DP BLUE MODE STN DISPLAY WITH CUSTOMIZED DESIGN FOR CUSTOMER

LAUER PCS095.M PCS WIN SERIELLES INTERFACE 24V DC +/-20% 10 VA

REGULATEUR SFERE DGN105 MAR

CLAVIER NUM 1020/1040/1060 MODE 14"

HAKKO/FUJI ELECTRIC V606IC10 OPERATOR PANEL

100MHZ - 12;1" - TFT - CONTROL PANEL

EBERLE BC42 OPERATOR PANEL

FANUC A02B-0236-C242 OPERATORS PANEL

AT 6500C517A1-A1B1F1 - OPERATOR PANEL

SIMATIC HMI TP700 COMFORT INOX; STAINLESS STEEL FRONT; MEMBRANE COVERING DISPLAY; PROTECTION CLASS FRONT IP66K; 7" WIDESCREEN-TFT-DISPLAY; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 12 MB USER MEMORY; WINDOWS CE 6.0; CONFIGURABLE FROM WINCC COMFORT V11

OEM TP27 10.4" STN COLOR COMPLETE CUSTOMER-SPECIFIC TOUCH MEMBRANE STANDARD MECHANICS

SIMATIC MOBILE PANEL 277F IWLAN (RFID); WITH INTEGRATED ENABL.-PUSHBUTTON EMERG.-STOP BUTTON;HANDWHEEL; KEY SWITCH AND TWO ILLUMINATED PUSHBUTTON; SUPPORTING IPCF (RAPID ROAMING) CONFIGURABLE W. WINCC FLEXIBLE STANDARD WITH VERSION 2008 SP 2 OR TIA PORTAL V11 SP2 INCL. 1 MAIN BATTERY POWER SUPPLY TO BE ORDERED SEPARATELY: 6AV6671-5CE00-0AX1 CHARGING ST. 6AV6671-5CN00-0AX2 EXTERNAL POWER SUPPLY UNIT

SIMATIC MP 277 10" KEY MULTIPANEL 10;4" TFT DISPLAY 6 MB USER MEMORY CONFIG. WINCC FLEXIBLE 2005 STANDARD SP1

SIMATIC MOBILE PANEL 177 PN W. INTEGRATED ENABLING BUTTON; CONFIGURABLE W. WINCC FLEXIBLE COMPACT VERSION 2005 AND HIGHER OR TIA PORTAL V11 AND HIGHER

SIMATIC PANEL PC 677B 2X10/100/1000 MBITS/S ETHERNET; 4XUSB V2.0; 1 X SERIE (COM1); 15"" TOUCHES; 1024X768; INTERFACE USB EN FACE AVANT 110/230VCA BLOC SECTEUR AVEC NAMUR; CABLE SECTEUR EUROPE; CORE 2 DUO T5500; 1;66 GHZ; C2N 2MO; 2 X PCI; 1GO DDR2 RAM; DD 80GO SATA 3;5""; DVD+-R+-RW; PROFIBUS/MPI; WINDOWS XP PROF MUI (AN;AL;FR;IT;ES;JAP;CHN;COR)"

ADVANCED TOUCH CONTROL TERMINAL. 12.1 INCHES; 800 X 600 PIXEL TFT SCREEN WITH 32K COLORS. 60MB MEMORY; 2 RS-232 PORTS; USB MASTER / SLAVE FUNCTION AND INTEGRATED GEA 10BASE-T / 100BASE-T ETHERNET CONNECTION

PANELVIEW 550 MONOCHROME TERMINAL 5.5-INCH; RS-232 (DH-485) COMMUNICATION PORT; KEYPAD; AC POWER

OPERATOR PANEL

NUMERICAL CONTROL SIAX 102

4.3” TFT COLOR TOUCHSCREEN PANEL WITH ETHERNET INTERFACE BLACK

OPERATOR PANEL OP17/DP LC DISPLAY; BACKLIT LED 4X20/8X40 LINESXCHARACTERS SIMATIC S7; M7 PROFIBUS-DP 1.5 MBAUD UL/CSA-LISTED

OPERATOR PANEL OP37 PENTIUM 100 MHZ; 8 MB RAM W. LC COLOR GRAPH. DISPLAY(TFT) W/O HD; WITH FD

SINUMERIK 840C/ 840CE FULL CNC KEYBOARD W. KEYBOARD INTERFACE 115-230 V AC

OP15/A2-VF OPERATOR PANEL 2 LINE DISPLAY; 40 CPL;VF DISP. WITH INTEGRATED INTERFACES 2 X TTY/V.24 AND 1 X MPI/PPI/ SINEC L2-DP; 256 KB USER MEMORY

DOP11B DRIVE OPERATOR PANEL 5.7" VGA 320 X 240 PIXEL MONO

POWER PANEL PP220 5.7" QVGA MONOCHROME LC-DISPLAY WITH TOUCH SCREEN (RESISTIVE); 1 APCI SLOT; 64 MB SDRAM; 256 KB SRAM; COMPACT FLASH SLOT (TYPE I); ETH 10/100; RS 232; 2XUSB

MULTI-TOUCH BUILD-IN CONTROL PANE 15-INCH DISPLAY 1024 X 768 DISPLAY ONLY; MULTI-FINGER TOUCH SCREEN

STANGE ELEKTRONIK SE-404 OPERATOR PANEL

ARTIS MARPOSS PROCESS MONITORING SYSTEM CTM-V5

POWER PANEL PP420; 5.7" QVGA COLOR TFT DISPLAY WITH TOUCH SCREEN (RESISTIVE); 1 APCI SLOT; 128 MB SDRAM; 512 KB SRAM; COMPACTFLASH SLOT (TYPE I); ETH 10/100; RS232; 2X USB; IP65 PROTECTION (FRONT SIDE); 24 VDC

8.4" LCD MONITOR VGA NUM 1060

PUPITRE OPERATEUR OP15/A 2 LIGNES; 40 CARACT./LIGNE

PANELVIEW 1000 GRAYSCALE TERMINAL 10.4-INCH; TOUCH SCREEN; DH-485 COMMUNICATION & RS-232 PRINTER PORT; 100-240V AC POWER

SINUMERIK PUPITRE OPERATEUR OP 015 ; 15;0" TFT(1024 X 768) AVEC TOUCHES A MEMBRANE

SINUMERIK 840C/840CE 19" SLIMLINE OPERATOR PANEL 9.5" COLOR DISPLAY; WITH INTEGRATED NC KEYBOARD AND KEYBOARD INTERFACE 115-230 V AC

SINUMERIK FM-NC/840D 6FX2007-1AE04 HAND-HELD CONTROLLER B-MPI COILED CABLE 3.5 M; 2 CHANNELS EMERGENCY OFF; 2 CHANNELS SAFETY SWITCH; 3 STAGES; WITH 4-WIRE CONNECTION

PANELVIEW 900 MONOCHROME TERMINAL KEYPAD RIO PRINTER PORT RS232

CP-C20 INTERFACE PROCESSOR FOR SIMATIC S5 W. 4 PORTS 12 MHZ; 512/64 KBYTE RAM SOFTWARE VERSION V5.X

OPERATOR INTERFACE TOUCH SCREEN 10"

MARK IV ELEKTRONIKON II COMPRESSOR CONTROLLER.

OPERATOR INTERFACE WITH LCD DISPLAY

OPERATOR INTERFACE 2LINE X 16 CHARAC LCD MICROVIEW

OPERATOR INTERFACE DL20 DISPLAY SYSTEM

SINUMERIK 840C/840CE 19" SLIMLINE OPER. PANEL; COLOR 10.4" DISPLAY WITH INTEGRATED FULL-KEY CNC KEYBOARD AND OPERATOR PANEL INTERFACE 24V DC

NUM 1060 CLAVIER FACE AVANT MACHINE MP01

SEDOMAT 5000 CONTROL PANEL A9020901 VGA LCD ACTIVE COLOR DISPLAY 640 X 480 PIXELS 2 X RS232 INTERFACE FOR CONNECTION OF PC; BARCODE READER; MODEM

DATA ENTRY TERMINAL HMI - MICROTERMINAL

SIMATIC C7-635 TOUCH; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU314C-2 DP AND TP170B; 24 DI; 16 DO; 5 AI; 2 AO; MICRO MEMORY CARD AND CONNECTOR SET REQUIRED

OPERATOR PANEL OP7/DP LC DISPLAY; BACKLIT LED 4 LINES; 20 CHARACTERS/LINE; SIMATIC S7; M7; PROFIBUS-DP 1.5 MBAUD UL/CSA-LISTED.

OP 35 OPERATOR PANEL WITH LC DISPLAY; MONOCHROME (PIXEL GRAPHICS); WITH 4 INTEGRATED INTERFACES 2 X TTY/V.24; X.27/TTY; MPI/PPI W/O DIRECT KEYPAD

SIMATIC PANEL PC 677 15" TOUCH; 1024X768; WITH FRONT SIDE USB INTERFACE AC110-230V; POWER CABLE EUROPE PENTIUM M760/2.0 GHZ; 533 MHZ FSB; 2MB SLC; 512MB DDR266 SDRAM (1X512MB); 80 GBYTE SATA HARD DRIVE 3;5" DVD-ROM; WINDOWS XP PROF MUI (EN;GE;FR;IT;SP;JP;CHN;KOR)

SIMADYN D OP2 OPERATOR PANEL; KEYPAD; 1 X RS-485 INTERFACE (USS); 1 X SERIAL PRINTER INTERFACE (V.24/TTY); 24V DC POWER; FOR USE WITH SIMOVERT MASTERDRIVES AND SIMOREG DC MASTER DRIVES

PANELVIEW 300 MONOCHROME 3-INCH TERMINAL; KEYPAD; DH-485 COMMUNICATION & RS-232 PRINTER PORT; DC POWER SUPPLY

SINUMERIK 840C/840CE 19" SLIMLINE OPERATOR PANEL; MONOCHROME; WITH INTEGRATED CNC KEYBOARD AND KEYBOARD INTERFACE; 115-230 V AC

SLC 500 DATA TABLE ACCESS MODULE; LCD DISPLAY WITH BACKLIGHTING; MONOCHROME; 2 LINES X 16 CHARACTERS; INPUT POWER 24V DC

SUTRON BT20H OPERATOR PANEL 067063 INTER BUS

SIMATIC HMI IPC 477C OEM; 19" TOUCH DISPLAY; 1280X 1024; CORE 2 DUO 1.2 GHZ; 4 GB RAM; 50 GB SSD SLC; WES 2009 INSTALLED ON SSD

MITSUBISHI GT11 SERIES GOT1000 TOUCH SCREEN HMI - 5.7 IN; LCD DISPLAY; 320 X 240PIXELS

CARTE POUR DMFP-V3

PANEL PC WITH 15" COLOR TFT LCD AND INTEL PENTIUM III/INTEL CELERON PROCESSOR

SIMATIC PANEL PC 670 STANDARD CONFIGURATION 15;1" COLOR TFT DISPLAY; TOUCH; 256 MBYTE SDRAM-133 (1X256MB); CELERON 1;2 GHZ; PS BOX AND FRONT 24V DC; 40 GBYTE HDD EIDE; WINDOWS 2000 MULTI LANGUAGE

SIMATIC MP 377 19" TOUCH MULTIPANEL; WINDOWS CE 5.0 19" COLOR-TFT-DISPLAY 12 MB USER MEMORY CONFIGURABLE FROM WINCC FLEXIBLE 2007

5.6” ¼ VGA MONOCHROME GRAPHIC HMI WITH ANALOG RESISTIVE TOUCHSCREEN POWER SUPPLY 24 V DC (18 TO 30 V DC)

OPERATOR TERMINAL WITH COLOR GRAPHIC LCD 8;4” TFT DISPLAY; SVGA (800×600); TOUCH SCREEN; 7 MB PROJECT; CLOCK; 128 KB RECIPES. AVAILABLE WITH LPT (CENTRONICS); ASP (RS232/485) .

OPERATOR PANEL OP7/PP LC DISPLAY; BACKLIT LED 4 LINES; 20 CHARACTERS/LINE; SIMATIC S5; 505;NATIVE DRIVERS; UL/CSA-LISTED

PROGRAMMABLE TERMINAL NT11S-SF121 PRINTER PORT

MITSUBISHI E1101 06035B ECRAN HMI TACTILE; E10 LCD TFT 10;4 POUCES COLORÉ; 800 X 600PIXELS 302 X 228 X 64 MM

REIS CONSOLE PHG10 PHG : 3.03  MC : 6.3  ID NR 2140350

PANELVIEW PLUS AND PANELVIEW PLUS CE 1250 COLOR TOUCH SCREEN 12.1 INCH COLOR ACTIVE MATRIX DISPLAY MODULE

10.4" DISPLAY; 30 LINE X 80 COLUMN CHARACTER DISPLAY; FULL GRAPHIC 640 X 480 RESOLUTION RESOLUTION; COLOR TFT DISPLAY; 64K COLORS; RESISTIVE TOUCH SCREEN; IP65 FRONT PANEL PROTECTION; 64MB USER MEMORY; OPTIONAL 32/64MBYTE MEMORY CARD; 10/100 MBIT ETHERNET INTERFACE; USB PORT; RS232 OR OPTIONAL CANOPEN (KPD-OPTC) COMMUNICATIONS INTERFACE.

SIMATIC MOBILE PANEL 277 W. INTEGRATED ENABLING BUTTON; STOP BUTTON; HANDWHEEL; KEY SWITCH AND TWO ILLUMINATED PUSHBUTTON; CONFIGURABLE W. WINCC FLEXIBLE STANDARD VERSION 2005 SP1 AND HIGHER OR TIA PORTAL V11 AND HIGHER

SIMATIC OPERATOR PANEL OP 73 MICRO FOR SIMATIC S7-200 3" LC DISPLAY; BACKLIT WITH GRAPHICS CAPABILITY CONFIGURABLE WINCC FLEXIBLE 2004 MICRO HSP UPWARDS; CONTAINS OPEN-SOURCE-SW; WHICH IS PROVIDED FREE OF CHARGE.

PANEL PC 477 OEM 15" TOUCH; 1024X768 PIXELS; PIII 933 MHZ; PROFIBUS DB; 512 MB RAM; 40 GB HDD; WITHOUT COMPACT FLASH; 115/ 230 V AC EUROPA; WINDOWS XP PRO

TD 10/220-5 TEXT DISPLAY TWO-LINE DISPLAY 20 CHARACTERS PER LINE.

SIMATIC MP270 MULTI PANEL 10" TFT DISPLAY 12 MB FLASH-EPROM / 32 MB RAM CONFIGURABLE WITH PROTOOL FROM VERSION V5.2+SP2

TD 10/240-8 TEXT DISPLAY TWO-LINE DISPLAY 40 CHARACTERS PER LINE

SIMATIC PANEL PC 477B 12" TOUCH DISPLAY; 800X600 STANDARD FRONT W. USB INTERFACE INTEL CELERON M 1;0 GHZ PROFIBUS DP 12 1 GB RAM (DDR2) 2 X ETHERNET 1 GBIT/S 4 X USB 2.0; 500MA 1 X RS232 (COM1) POWER SUPPLY DC 24V 2 CF-SLOTS W/O MASS STORAGE.

LAUER PCS+ SERIELLES INTERFACE PG 190 203.3