Zentralprozessor

SIMODRIVE 611 POWER MODULE; 1 AXIS; 8 A; INTERNAL COOLING; MOTOR RATED MOTOR RATED CURRENT: FEED = 3 A MAIN SPINDEL =3 A

PROCONTIC T300 - CENTRAL DEVICE WITH 30K GJR5146600R0101

CPU 2 PORTS + HORODATEUR + RÉSEAU DE SERVICE

SIMATIC S7-200; CPU 215 COMPACT UNIT; DC POWER SUPPLY 4K PRG/2;5K DW; 14DI DC/10DQ DC PROFIBUS-DP INTERFACE

SINUMERIK FM-NC/810D/DE/840D/DE MMC103 AVEC LOGICIEL SYSTÈME LOGICIEL 3.7/4.4/5.3 (WFW3.11/WINDOWS 95) PENTIUM 133 MHZ; 32 MO DE D-RAM LANGUES: DE; EN; FR; IT; SP (BESY : SINUMERIK 840D BS002)

AS-9715-001 AEG MODICON 984 685 PC-0984-685 PROGRAMABLE CONTROLLER

SIMATIC S7-300; CPU 314C-2 PTP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED INTERFACE RS485; INTEGRATED 24V DC POWER SUPPLY; 96 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-400H; CPU 417H CENTRAL UNIT FOR S7-400H 4 INTERFACES: 1 MPI/DP; 1 DP A. 2 FOR SYNC MODULES 4MB MEMORY (2MB CODE/2MB DATA)

CLAVIER - COMMANDE NUMÉRIQUE NUM 720F 205201215

SLC 500 SLC 5/04 CPU PROCESSOR; 64K MEMORY; DH+ & RS-232 COMMUNICATION PORTS

OMRON CJ1G CPU4H UC 1280 PTS 60 K PROG 128K DATA

CPU UNIT SERIE CS1 960 BITS 10 KSTEP

PLC-5/30 PROCESSOR; 32K WORD SRAM; 1024 TOTAL I/O; 1024 ANALOG I/O; 2 DH+/REMOTE I/O CHANNELS; 1 RS-232 CHANNEL

ETHERNET LOOP PROCESSOR MODULE

SINUMERIK 840D/DE NCU 573.3 PENTIUM III W/O SYSTEM SOFTWARE MEMORY: NC 2.5 MB; PLC 96 KB PROFIBUS-DP PREP..

DIGIDRIVE SE 0.5M - 5;6A - 0;25 KW

VARIATEUR MOTEUR À COURANT CONTINU - CALIBRE 12A

SYSMAC CPM2A PROGRAMMABLE CONTROLLER 12 INPUTS 24VDC AND 8 OUTPUTS RELAY POWER SUPPLY 24VDC

CPU FOR 640 BASE I / O (MAX 20 UNITS). 0.1 MS / C BASIC INSTRUCTIONS; 20 KSTEPS RAM AND 32 WORDS DATA STORAGE

SINUMERIK 840DE CNC-HARDWARE NCU 561.5; 400 MHZ; 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB; PLC 128 KB PREPARED FOR PROFIBUS DP; ACCORD. TO IEC 61508

CPU MODULE ETHERNET IP 48K WORD SRAM PLC-5/40 SERIE E.

SIMATIC S5; COORDINATOR 923C FOR ZG 135U/155U

MICROMASTER 420 SANS FILTRE MONO-/TRIPH. 200-240 V +10/-10% 47-63 HZ COUPLE CONSTANT 0;75 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 0;75 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMATIC S5; COMPACT S5-90U PROGRAMMABLE CONTROLLER WITH BATTERY; 10 DI 24V; 6RELAY CONTACTS; SUPPLY VOLTAGE 115/230V

ARBURG CPU BOARD 795

MICROLOGIX 1500 STANDARD PROCESSOR UNIT; 7.65K WORDS;.

1746 SLC SYSTEM; SLC 5/04 CONTROLLER; 16K MEMORY

DIO HEAD-END ADAPTOR MODICON QUANTUM - 2 MODBUS+RS485 TWISTED PAIR REDUNDANT CU

CENTRAL PROCESSING UNIT PSS CPU 302060

DISQUE DUR POUR SINUMERIK PCU 50 566 MHZ; 128 MO RAM; 24 V CC; WINDOWS NT WORKSTATION V4.0 POUR SYSTEMES INTEGRES (WINNT4.0 WS EMBSYS)

VARIATEUR DC VEA 7.4 AMP 220 - 240V ± 10 % 50-60HZ INDUIT 0-190 VDC 6.7 AMP EXITATION 100 VDC/190VDC 0.9 AMP

CPU QUANTUM 256K 1 MB+

UNIDRIVE SP4401 - 30KW - 60A

GE FANUC 90-30 5 SLOTS + CPU

GE FANUC SERIES 90-30 CPU MODULE WITH SERIAL PORTS.

CO-PROCESSOR MODULE PROGRAMMABLE 90/70 SERIES IC697PCM711

DIGIDRIVE SE 1M - 6;5A - 0;37KW

2005 CPU; 4 MB DRAM; 850 KB SRAM; 512 KB FLASHPROM; 2 INSERT SLOTS; 1 PCMCIA SLOT; 1 RS232 INTERFACE

SIMODRIVE 611 POWER MODULE; 1 AXIS; 8 A; INTERNAL COOLING; MOTOR RATED CURRENT: 1FT5 = 4A; 1FT6 = 3A

SINUMERIK FM-NC/810D /840D/DE MMC103 WITH SYSTEM SOFTWARE SW 3.7/4.4/5.2 (WFW3.11/WIN95) PENTIUM 200 MHZ; 64 MB D-RAM LANG.: GER; EN; FR; IT; SP (BESY: SINUMERIK 840D BS002)

CARTE DE GESTION ALNI6

PROG. COPROC. MDL.; 160 KB (35 KB BASIC PRGM); W/PORT EXP. CBL.

INDRACONTROL L20 WITH PROFIBUS D REF R911306455.

CENTRALE UNIT AFR9 REF 1SBP260030R1001.

MODULE COMAU C4G 10152180 IBO FIELDBUS PROCESSOR

TI 405 CENTRAL PROCESSING UNIT 435-CPU

FANUC MAIN CPU BOARD A16B-3200-0412.

DEMAG BITPROZESSOR 6EJ5 921-1AA21

PROCESSEUR M580; 64 MB MÉM INTERNE; 31 STATIONS RIO (X80 & QUANTUM IO)

TAKAMAZ CONTROL BOARD LX0404-01-001A

MU 6166 - ELECTRONIC BOARD +24V / +15V / -15V

MAGNESCALE MG10-P2 MAIN MODULE

KISTERS DUO-ACHS CPU BOARD

CPU 331 MODULE(16 KBYTES USER PROGRAM MEMORY)

PROGRAMMABLE COPROCESSOR MODULE; 192 KBYTE (47 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE)

VIPA BG86 STANDARD MODULE SERCOS 07.91465-9006 SER-BG86

YM222001-UC PFTK 101A CONTROL UNIT BOARD

PROC.TSX 57.35 COM FIPIO INTEGR NON ROHS

SIMATIC S7-200; CPU 226 COMPACT UNIT; DC POWER SUPPLY 24 DI DC/16 DO DC; 8 KB CODE/5 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S7-200; CPU 226 COMPACT UNIT; DC POWER SUPPLY 24 DI DC/16 DO DC; 16/24 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS.

SIMATIC S5 CPU 945 FOR S5-115U; 256 KBYTE

CPU. TSX 57.45 V3 CON FIPIO INTEGR. ROHS VERSION

SIMATIC S5; S5-95U COMPACT UNIT

MODICON - PROCESSEUR PL7 DOUBLE FORMAT TSXP57402M

MICROMASTER 440 SANS FILTRE 1/3AC200-240V+10/-10% 47-63HZ COUPLE CONSTANT 0;37 KW SURCHARGE 150% 60S; 200 % 3S COUPLE QUADRATIQUE 0;37 KW 173X 73X 149 (HXLXP) DEGRÉ DE PROTECTION IP20 TEMPÉRATURE AMBIANTE -10+50°C SANS AOP/BOP

SLC 500 SLC 5/04 CPU PROCESSOR; 64K MEMORY; DH+ & RS-232 COMMUNICATION PORTS

COMPACT PLC; 16DI; 16DO; 4AI; 1AO; 1HSC; RTC; 16KB EEPROM

TSX QUANTUM RIO HEAD-END ADAPTOR MODULE MODICON QUANTUM 2 CONNECTORS WITH REDUNDANT CABLE

MICROMASTER 440 WITH BUILT-IN CLASS A FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 11 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 15 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP

GE FANUC - CENTRAL PROCESSOR UNIT - SERIE 90-70

SIMATIC S7-300 CPU319F-3 PN/DP; CENTRAL PROCESSING UNIT WITH 1400 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; 3. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 SP3 OR HIGHER

TSX PREMIUM CPU TSX 57.30 V3 1024 E/S TOR 128 E/S ANALOG 32 VOIES MÉTIERS 64/80 K MOTS INTÉGRÉ 384 K MOTS MAXI SUR PCMCIA 3 RÉSEAUX 8 BUS AS-INTERFACE 1 BUS CANOPEN 2 BUS DE TERRAIN

TSX PREMIUM 574X3 ETY PORT PROCESSOR MODULE.

SINUMERIK 840D/DE BOX FOR ELECTRONIC CONTROL DEVICE NCU BOX FOR INSTALLATION OF NCU 561.2/.3/.4/.5 NCU 571/571.2/.3/.4/.5 NCU 572/572.2/.3/.4/.5 NCU 573.2/.3/.4/.5 WITH POWER UNIT; BATTERY AND FAN

SIMATIC S7-300; CPU 314 CPU WITH INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

UNITY PROCESSOR - 2 RACKS (12 SLOTS) / 4 RACKS (4/6/8 SLOTS) - 850 MA; 5 V DC.

PROCESSOR MODULE M340 - MAX 512 DISCRETE + 128 ANALOG I/O - MODBUS

MICROMASTER 440 SANS FILTRE 3 380-480 V CA+10/-10% 47-63HZ COUPLE CONSTANT 1;1KW SURCHARGE 150% 60S; 200% 3S COUPLE QUADRATIQUE 1;1KW 173X 73X 149 (HXLXP) INDICE DE PROTECTION IP20 TEMPÉRATURE AMBIANTE -10+50DEGC SANS AOP/BOP

SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 1.5 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300; CPU 315-DP CPU WITH INTEGRATED 24 V DC PS; 64KB WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

SIMATIC S7-400; CPU 414-3 MODULE UNITÉ CENTRALE AVEC : 1;4 MO DE MÉMOIRE DE TRAVAIL; (700 KO DE CODE ; 700 KO DE DONNÉES); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP; 3. INTERFACE MODULE IFM ENFICHABLE

SIMATIC S7-300; CPU 313C-2DP COMPACT CPU WITH MPI; 16 DI/16 DO; 3 FAST COUNTERS (30 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S5; S5-95U COMPACT UNIT WITH 2 INTERFACES AS511

SIMATIC S5; CPU 942 F. S5-115U PLC RAM 10 KBYTES

SIMATIC S7-200; CPU 214; COMPACT UNIT 2 K STATEMENTS; 2 K DATA WORDS 14DI/10DQ; RELAIS OUTPUTS.

SIMATIC S7-400; CPU 412-2 144 KB WORKING MEMORY (72 KB CODE; 72 KB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2. INTERFACE DP

CARTE PROCESSEUR RÉGULATION UNITELWAY

SIMATIC S7-300 CPU 315-2 PN/DP; CENTRAL PROCESSING UNIT WITH 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY USEABLE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 OR HIGHER.

SIMATIC S5; CPU 943 FOR S5-115U PLC; RAM 48 KBYTES W. 1 PROGRAMMER PORT.

SIMATIC S7-300; CPU 317F-2DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.2 SP1 AND HIGHER

SIMATIC S7-300; CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; INTEGRATED 24V DC POWER SUPPLY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-400; CPU 414-3 CENTRAL PROCESSING UNIT WITH: 2.8 MB WORKING MEMORY; (1.4 MB CODE; 1.4 MB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP; 3. IF IFM MODULES PLUGGABLE

SIMATIC S5; CPU 103 F.S5-100U PC W.POWER SUPPLY UNIT 24V/9V DC W/O MANUAL

UNITY HOT STANDBY PROCESSOR - 1 RACKS(6/8/12 SLOTS) - 4 COM MODULE PROCESSOR.

PROCESSEUR 57.50 UNY + FIPIO.

DOUBLE-FORMAT PL7 PROCESSOR 550 MA 5 V DC

UNITY PROCESSOR - TRANSPARENT READY - 8 RACKS (12 SLOTS)/16 RACKS (4/6/8 SLOTS).

X20 CP 1485 PLC CPU MODULE CELERON 400 PROCESSOR 32MB POWERLINK