Zentralprozessor

PROCESSEUR UNY 572X4 ETH ETHERNET TCP/IP RJ45N SERIAL LINK 2 FEMALE MINI DIN RS485 19.2 KBIT/S

SIMATIC S7-300; CPU 315 CPU WITH INTEGRATED 24 V DC POWER SUPPLY; 48 KBYTE WORKING MEMORY

SIMATIC S7-200; CPU 224; COMPACT UNIT; DC POWER SUPPLY 14 DI DC/10 DO DC; 8/12 KB CODE/8 KB DATA; PROFIBUS DP EXTENDABLE.

SIMATIC S7-300; CPU 314C-2DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 64 KBYTE WORKING MEMORY; FRONT CONNECTOR ( X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-200; CPU 222 COMPACT UNIT; AC POWER SUPPLY 8 DI DC/6 DO RELAY 4 KB CODE/2 KB DATA; PROFIBUS DP EXTENDABLE

SIMATIC S7-200; CPU 226 XM COMPACT UNIT; AC POWER SUPPLY 24 DI DC/16 DO RELAY; 16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

M1/M1E PROCESSOR ADAPTOR - 1 MODBUS; 1 I/O BUS - 32 MHZ

SIMATIC S7-400; CPU 412-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE; 48 KB WORKING MEMORY

CARTE PROCESSEUR V2-40KO POUR NUM750/760

SINUMERIK FM-NC/810D/DE/840D/DE MMC103 ) PENTIUM 133 MHZ; 32 MO D-RAM LANGUES: AL; AN; FR; IT; ES (SYS.EX: SINUMERIK 840D BS002).

CARTE UAL

SIMATIC S5; S5-95U COMPACT UNIT W. PROFIBUS-DP MASTER INTERFACE INCLUDING MASTER MODULE

ZE 300 PROCESSOR

SIMODRIVE 611-A FEED MODULE; 4/8 A; OPTION MAIN SPINDLE;ENHANCED INTERFACE

RACK NUM 1060 REF 205203603

CPU SEPRO PG 2010 SBC

DC DIVE FMV102 0.75 KW INPUT 220-240 VAC

MICROMASTER VECTOR MMV25 WITH BUILT IN CLASS A FILTER 1AC 208-240V +/-10% 50/60HZ CONSTANT TORQUE: 0.25 KW OVERLOAD 150% 60SEC; 200% 3SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C.

MICROMASTER JUNIOR MMJ12 120W CLASS A FILTER 230V 1 AC

MICROMASTER JUNIOR MMJ37 370W CLASS A FILTER 230V 1 AC

MICROMASTER MM300/3 UNFILTERED 3AC 380/500V +/-10% 50/60HZ CONSTANT TORQUE: 3.0 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 184 X 149 X 172 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

DIGIDRIVE SK 2.5M/TL - 1;5KW - 2HP

GJR5250500R0101 CPU 14 K FLASH EPROM 4 ANALOGUE INPUTS 12 BITS RESOLUTION 2 ANALOGUE OUTPUT 12 BITS RESOLUTION2 PROGRAMMABLE RS 232 PORT RS 485 SYSTEM BUS 24 VDC POWER SUPPLY

SYSMAC C20 16DI 12DO 24VDC 2A

SINUMERIK 810D/840D ELECTRONIC CONTROL DEVICE PCU20: SPC 266+MHZ/32MB 24V DC WITH CURRENT HMI SOFTWARE

SUPPLY 24VDC 16 INPUTS 14 RELAY OUTPUTS CPU RELAY OUTPUT COMPUTER INTERFACE; 2000 STEPS PROGRAM CAPACITY; 30 I/O PORTS

HONEYWELL ISSC IPC 620-15 PROCESSOR MODULE 2K 4K MEMORY; 512 I/O

A250 MODICON 1MB RAM - A250 CENTRAL CPU

SYSMAC PROGRAMMABLE CONTROLLER C200HS CPU01 6974 WORDS (IN MEMORY UNIT) POWER SUPPLY VOLTAGE 100-240VAC

SINUMERIK 840D/DE CNC-HARDWARE NCU 571.5; 400 MHZ; 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB; PLC 128 KB PREPARED FOR PROFIBUS DP; ACCORD. TO IEC 61508

NUM 720B 205201215 PUPITRE POUR FRAISEUSE

SCHLEICHER POSITIONING PROCESSOR MODULE USP 21

COTAS CT 3507 CPU BOARD

UNC632 UNIVERSAL NETWORK CONTROLLER

1SBP260010R1001 EXTENSIBLE CENTRAL UNIT WITH CS31 BUSWITH 8 ISOLATED INPUTS 24 V D.C. AND 6 INCORPORATED RELAY OUTPUTS250 V A.C. / 2 ARS232 OR RS485 INTERFACEFOR PROGRAMMING OR ASCII OR MODBUSÂCOMMUNICATION24 V D.C. POWER SUPPLY

UNIDRIVE 37 KW 70A 400VAC - UNI3405

MODULE OPÉRATEUR DE COMMUNICATION OU S055A

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART - CALIBRE 30A - 230/400VAC 50/60HZ.

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART

H-702 ENHANCED CPU; 1280 POINTS; 0.9?S/COMMAND;RS-232C SERIAL PORT I/F; 15.7K STEPS RAM/EPROM; PID FUNCTIONALITY

CPU 180 BASIS FOR I / O (MAX. 3 EXP.). 1 X USB; 2 X SERIAL OPTION. MS 0.55 / K-BASISINSTR. 10K STEPS PROG. 32K WORDS AND DATA. 36 IN (6 INTERRUPT / 2 X 100 KHZ COUNTER). 24 IN A RELAY 2. 1 X 8 BIT ANALOG IN. 24 V DC POWER SUPPLY

SIMATIC S7-1200; CPU 1212C; CPU COMPACT; AC/DC/RELAIS E/S EMBARQUEES: 8 ETOR 24V CC;6 STOR RELAIS 2A; 2 EA 0 - 10V CC; ALIMENTATION: CA 85 - 264 V CA SOUS 47 -63 HZ; MEMOIRE PROGR./DONNEES 75 KO

PS316 EBE 223.1 PROCESSOR MODULE

SIROTEC RCM 3C/3S/1KC FROM SW03 6FX1110-7AG01 MASTER CPU SUBMODULE; 8 MHZ NEC.

UNITÉ CENTRALE + 3 COUPLEURS JBUS RS232

SIMATIC S5; CPU 947 CENTR.PROCESS.UNIT F.S5-155U PC MONOPROCESSOR

MICROMASTER 440 SANS FILTRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT CONSTANT 0.55 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 0.55 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMATIC S7-200; CPU 224; COMPACT UNIT; DC POWER SUPPLY 14 DI DC/10 DQ DC; 8 KB CODE/5 KB DATA

SIMATIC S7-1200; CPU 1212C; COMPACT CPU; AC/DC/RLY; ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0 - 10V DC; POWER SUPPLY: AC 85 - 264 V AC AT 47 - 63 HZ; PROGRAM/DATA MEMORY: 25 KB

SIMATIC S7-400; CPU 412-1 96 KB WORKING MEMORY (48 KB CODE; 48 KB DATA) INTERFACE MPI/DP 12 MBIT/S

SIMATIC S5; CPU 947R F. S5-155H PLC

SINUMERIK 840C/840CE NC CPU 486DX4 8MB RAM

SICOMP AMS-M006-A8 *KS:3-4 CPU WITH 8086; 8 MHZ; 6 HOLDERS F. MEMORY MODULES 1 V.24/V.28 INTERFACE AND 24 PARALLEL I/O LEADS

CARTE MII CPU BOARD GMI-CPU7M

S7-1500; CPU 1515-2 PN; CENTRAL PROCESSING UNIT WITH WORKING MEMORY 500 KB

SIMATIC S7-1500F; CPU 1515F-2 PN; CENTRAL PROCESSING UNIT WITH WORK MEMORY 750 KB FOR PROGRAM AND 3 MB FOR DATA; 1ST INTERFACE: PROFINET IRT WITH 2-PORT SWITCH; 2ND INTERFACE: PROFINET RT; 30 NS BIT PERFORMANCE; SIMATIC MEMORY CARD REQUIRED

MMC-SICOMP FM 486 FUNCTION MODULE FOR USE IN AS 950 (SIMATIC S5) W. 96PIN BASE CONNECTOR W/O DOCUMENTATION W. SOFTWARE (BD486; COMNET)

CARTE CPU VARIATEUR REFU 316

CARTE MICROPROCESSEUR  LB3971

POWERFUL CPU FOR THE X20 SYSTEM INTEL CELERON 400 PERFORMANCE WITH ADDITIONAL I/O PROCESSOR ETHERNET; POWERLINK AND USB ONBOARD

SIMATIC S7-300; CPU 317TF-2 DP; UNITÉ CENTRALE POUR TÂCHES D'AUTOMATISATION; TÂCHES TECHNOLOGIQUES ET DE SÉCURITÉ 1;5MO DE MÉMOIRE DE TRAVAIL; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP (DRIVE); INTÉGR. E/S POUR TECHNOLOGIE; CONNECTEUR FRONTAL (1X 40 PÔLES) ET MICROCARTE MÉMOIRE 8 MO NÉCESSAIRE

IC693CPU313 EMBEDDED CPU WITH A 5-SLOTTED BASEPLATE

IC693CPU313 EMBEDDED CPU WITH A 5-SLOTTED BASEPLATE

GE FANUC CPU 350 MODULE (32K BYTES USER MEMORY; 4K I/O; 8 RACKS); NO BUILT-IN SERIAL PORTS .22MSEC/PROCESSOR (32K BYTES USER MEMORY; 4K I/O; 8 RACKS)

2003 CPU; 100 KB SRAM; 256 KB FLASHPROM; 24 VDC; 7 W SUPPLY; 1 RS232 INTERFACE; 1 CAN INTERFACE

APRIL PB 80 UNITÉ CENTRALE 2K REPROM

MICROMASTER 420 UNFILTERED 3AC 380-480V 10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

CARTE CPU CYBER 4000 NN6601B

MICROMASTER 420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

PROGRAMMABLE CONTROLLER SERIE PCA2 PCA2.M2

PCD4 SERIE PROCESSOR MODULE 16 MHZ

PS4 DIGITAL I/O COMPACT PLC

CENTRAL PROCESSING MODUL FOR AS 235 AND AS 235 K

S5-210 MICROCOMPUTER SYSTEM CENTRAL PROCESSING UNIT BIT PROCESSOR F.S5-210A.

PIOVAN CONTROL BOARD B94V-0

CARTE

APRIL PB80 UC 2 K REPROM JBUS LIAISON RS 232/BDC

SIMATIC S5; CPU 944 F. S5-115U PLC RAM 96 KBYTES W. 1 PROGRAMMER PORT

SIMATIC S5; 926 CPU F.S5-150S;-150U CENTR.CONTROLL.

MICROMASTER 440 SANS FILTRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT CONSTANT 5.5 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 7.5 KW 245 X 185 X 195 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

DIGIDRIVE SK 3.5M/TL - 2;2KW - 3HP

C200 PACDRIVE CONTROLLER C200/10/1/1/1/00 PROCESSOR ST-PC VEGA RAM 128 MB FLASH MEMORY 32 MB

CARTE CPU 0310102500E7

SIMATIC S7-1500F; CPU 1517F-3 PN/DP; UNITE CENTRALE AVEC MEMOIRE VIVE 3 MO POUR PROGR. ET 8 MO POUR DONNEES; 1RE INTERFACE: PROFINET IRT AVEC COMMUT. 2 PORTS; 2ME INTERFACE: PROFINET RT; 3ME INTERFACE: ETHERNET; 2 NS PERFORMANCE SUR BIT; SIMATIC MEMORY CARD NECESSAIRE

SIMATIC S7-400; CPU 414-2 CENTRAL PROCESSING UNIT WITH: 512 KB WORKING MEMORY; (256 KB CODE; 256 KB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP.

ALSPA C100 MODULE 8 ENTRÉES ANALOGIQUES CONFIGURABLES TENSION / COURANT 0 À 5 V; 0 À +30V; -10 À +10V DC .

CARTE DE VANNE PROPORTIONNEL HYDRAULIQUE REXROTH.

CARTE PROC. MACH. 0204203123 NUM 1060 NUM 1062 V2 4MO PROCESSEUR MACHINE 4 MO 204203123 - 0204203123 - 203123 NUM

KISTERS X000018000 MVME

MODULATEUR DE FRÉQUENCE FMV1105 0.37 KW ENTREE 1 PH 240 VAC 50-60 HZ

SIMATIC S7-1200; CPU 1214C; COMPACT CPU; AC/DC/RLY; ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0 - 10V DC; POWER SUPPLY: AC 85 - 264 V AC AT 47 - 63 HZ; PROGRAM/DATA MEMORY: 75 KB

KISTERS ACRT CPU BOARD REF X000003451

SIEMENS SICOMP AMS-M36-A161

PLC-5/40 CPU4 DH+ OR REMOTE I/O (ADAPTER OR SCAN)USER MEMORY WORDS; MAX 48 000 TOTAL I/O; MAX 2048 SERIE E

SIMATIC S7-300; CPU 314 CPU WITH MPI INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 96 KBYTE WORKING MEMORY; MICRO MEMORY CARD NECESSARY.

MICROMASTER MM12 WITH BUILT IN CLASS A FILTER 1AC 208-240V +/-10% 50/60HZ CONSTANT TORQUE: 0.12 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

1762 MICROLOGIX 1200 SYSTEM; MICROLOGIX 1200; 120/240V AC POWER; (10) STANDARD 24V DC AND (4) FAST 24V DC DIGITAL INPUTS; (10) RELAY OUTPUTS