Power supplies

ASSY; POWER SUPPLY 15V

CARTE ALIMENTATION

ALIMENTATION - POWER SUPPLY

ALIMENTATION

600W MP CONFIGURABLE POWER SUPPLY

ONDULEUR

ONDULEUR 7000W

SINAMICS S120 CONVERTER POWER MODULE PM340 INPUT: 3AC 380-480V; 50/60HZ OUTPUT: 3AC 45A (22KW) FRAME SIZE: BLOCKSIZE SIZE FSD INTERNAL AIR COOLING

SINAMICS/MICROMASTER PX REPLACEMENT POWER BLOCK FOR 3AC 380-480 V; 50/60 HZ; 260 A AC DRIVE/POWER MODULES RECTIFIER AND 3 PHASES

SITOP POWER 2.4 A; SPECIAL LINE STABILIZED AS-I POWER SUPPLY INPUT: 24 V DC (20.4...28.8V) OUTPUT: 30 V DC/2.4 A

VARISTAB200 REF:6010 48V 5A

BOSCH POWER SUPPLY CARD 038035-701401

POWER SUPPLY ULTRAFLEX 600 W INPUT 90-250VAC 10A 50-60 HZ

POWER SUPPLY MODULE 29.8 KW INPUT 3 PH 200-240VAC 106 AMP 50-60 HZ OUTPUT 283-339 VDC

ALIMENTATION 5/12/24V 5/1/3A

PHILIPS PE 1942/00B U POWER SUPPLY INPUT VOLTAGE OF 110/230 V FROM 47-63 HZ OUTPUT VOLTAGE OF 24V/12.5A

HEIDENHAIN UVR140D POWER SUPPLY 45KW ID 728 253-01

WEKO HEIDELBERG POWER SUPPLY 5E.110.1511

POWER SUPPLY DBM04 INPUT 400/460 VA

PIONEER PM2500A-1 POWER SUPPLY 24V 40A REF 660-007612-001

EVLINK PARKING - BORNE SUR PIED - 2 PRISES T2S - 22KW

TRANSFORMATEUR D'ISOLEMENT - PRIM 400 V/SEC 230 V+N - 10KVA

VARISTAB200 REF:6012 48V 10A

FTF SERIES THREE PHASE FILTERS RATED CURRENT : 30A LEAKAGE CURRENT @ 440V 50HZ NOM/MAX: 0.7/68

CHARGEUR DTR8510

ALIMENTATION IMPRIMANTE

PRI 400V SEC 24V 15A

FILTRE VIDEO

SAFELINE SLP30 POWER SUPPLY ASSEMBLY

ALIMENTATION 5V

VICKERS POWER SUPPLY DBM-PS

POWER SUPPLY ADAPTER

ALIMENTATION

INPUT 100-240V OUPUT 57V ...... 500W

ALIMENTATION 24VDC 600W

ALIMENTATION RAILS DIN 24 V/DC 40 A 960 W BLOCK PVSB 400/24-40

MITSUBISHI MDS-DH-CV-185 POWER SUPPLY UNIT MDS 18.5KW 400V

ALIMENTATION D'ORDINATEUR

The equipment with type Alimentation is manufactured by BAUMULLER and commercialized under the reference 3,8402.The equipment alternative reference is : 38402. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by EFI and commercialized under the reference CARTE IMAGING.The equipment alternative reference is : CARTEIMAGING. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by INTEGRATED POWER DESIGNS and commercialized under the reference REL-150-4007.The equipment alternative reference is : REL1504007. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by FINMOTOR and commercialized under the reference FIN-1500-050-V.The equipment alternative reference is : FIN1500050V. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

AVR AUTOMATIC VOLTAGE REGULATOR

MITSUBISHI MDS-DH-CV-185 POWER SUPPLY UNIT MDS 45KW 400V

DC DRIVE 40 AMP INPUT DC 200 V OUTPUT DC 153 V

CIB SINAMICS G AC 380-480V

KDV SUPPLY MODULE FOR AC DRIVES SERIES: 2; VERSION: 2; RATED CURRENT: 100A; AC 220V; DC 300V

CABLE DE LIAISON LONGUEUR 1 MÈTRE POUR CLAVIER DIGITAL DÉPORTÉ VARIATUR VFDE

SERVOMAC UAC PWS30M POWER SUPPLY 12KW.

SERVODYN POWER SUPPLY MODULE 3/PE AC 400 VOLTS 50HZ; DC 520V 60A

BUG20 SERVO POWER SUPPLY UNIT INPUT 3X220VAC OUTPUT 310 VDC 120A;

SIMOVERT MASTERDRIVES VECTOR CONTROL RECTIFIER/REGENERATIVE UNIT SELF-COMMUTATED A. PULSED (AFE) CABINET UNIT; IP20 3 AC 380-480V; 50/60HZ RATED INPUT CURRENT: 1045A NOMINAL POWER RATING: 706KW AT COS PHI = 1 AND UN = 400V

ALIMENTATION REDRESSÉE MONOPHASÉE FILTRÉE 230/400V 24V= 120W 5A

PHOENIX CONTACT; QUINT 5- POWER SUPPLY -78-103-3300; QUINT PS-230AC/24DC/5 INPUT:230VAC/47-63HZ; OUTPUT: 24VDC

AC/DC ESSENTIAL POWER SUPPLY 24-28V DC OUTPUT VOLTAGE; 5A; 120W; SINGLE PHASE; 120/230V AC INPUT VOLTAGE; STANDARD MODULE; DINRAIL MOUNT

SINAMICS G120 POWER MODULE PM260 WITHOUT FILTER POSSIBILITY OF REGENERATION 3AC500-690V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 15KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 18;5KW FOR 140% 3S;110% 57S;100% 2

ALIMENTATION CHÂSSIS OUVERT AC/DC (PSU); A DÉCOUPAGE; 1 SORTIE; 40 W; 24 V; 1.7 A

ALIM REDRESSÉE MONOPHASÉE FILTRÉE - PRIM 230/400 V - 24 V= - 120 W - 5 A

MAINS MODULE AEB 030.3 16 KW INPUT 3 X 400 VAC ± 10%; ---15% 50/60 HZ OUTPUT 530-560VDC

ALIMENTATION À DÉCOUPAGE PRIMAIRE AVEC SYSTÈME DE CONTRÔLE ET DE CHARGE INTÉGRÉ; CLASSIC; MONOPHASÉ; TENSION DE SORTIE 24 V DC; COURANT DE SORTIE 5 A

POWER SUPPLY MAGNETEK 3574 BTCRT

A20B-2101-0392 SERVO POWER SUPPLY BOARD PCB - ALPHA I PSM FOR 6110 AND 6120 HV SERIES

ALIMENTATION

ALIMENTATION 24V

ALIMENTATION À DÉCOUPAGE TRIO-PS/1AC/24DC/10 24VDC 10A  RÉF : 2866323

KDV SUPPLY MODULE FOR AC DRIVES SERIES: 1; VERSION: 3; RATED CURRENT: 100A; AC 220V; DC 300V

INDRAMAT POWER SUPPLY TVM 2.1-50-220

SINAMICS G120D POWER MODULE PM250D WITH INTEGRATED CLASS A FILTER CAPABLE OF ENERGY RECOVERY. 380-480 V 3 AC+10/-10% 47-63HZ POWER HIGH OVERLOAD: 5.5KW AT 200% 3S; 150% 60S 100% 300S AMBIENT TEMPERATURE -10 TO +55 °C 210X 450X 220 (HXWXD); FSC DEGREE OF PROTECTION IP65 WITHOUT CONTROL UNIT

MASTERDRIVES SIMOVERT UNITÉ D'ALIMENTATION APPAREIL ENCASTRABLE/IP00 3AC 500-575 V; 50/60HZ 1880A

APC SMART-UPS VT 20KVA 400V W/3 BATT MOD EXP TO 4; START-UP 5X8; INT MAINT BYPASS; PARALLEL CAPABLE

ALIMENTATION SPÉCIFIQUE 29VCC 1.5A

MITSUBISHI MDS-B-CV-185 ALIMENTATION MDS 30.0 KW

POWER SUPPLY UNIT 385 PS7171-1CF1

PM-D F2 FOR MOTOR STARTER POWER MODULE; FAIL-SAFE UP TO SAFETY CATEGORY 4 EN 954-1 FOR AUTO START PROTECTION DOOR CAN BE PLUGGED ONTO TM-PF30 S47-B0 -B1 30 MM

TRACOPOWER POWER SUPPLY 24VDC 6;25A

PILZ POWER SUPPLY 230/115VAC PSS PS230 REF 301050

CARTE REGULATION DE CHAUFFE HACHMANG

SOURCES D'ALIMENTATION À COMMUTATION 750W 12V 62.5A POWER SUPPLY W/PFC

SOURCES D'ALIMENTATION À COMMUTATION 360W 12V 30A SIGN PANEL PWRSUPPLY

ALIMENTATION À DÉCOUPAGE INTÉGRÉE SMPS 30W 2 SORTIES; TENSION : ±15V CC; COURANT : 1A

BLOC D'ALIMENTATION POUR DIGI ENTRÉE : CORDON 220V SORTIE : 2 FILS = 12V

ALIMENTATION POUR CONVERTISSEUR DE MESURE MONTAGE SUR RAIL SORTIE : 4 X DC24V;25MA ALIMENTATION : AC 230V +10/-15%; 48..63HZ 1;5VA

ALIMENTATION REGULÉE 230-400V/12 15 V 100A STABILISÉE

ALIMENTATION DC; 45KW; 0-48VDC; 0-937A. ENTRÉE; TRIPHASÉE; 3X400VAC. INTERFACE ANALOGIQUE 0-5/0-10V & RS232. PILOTAGE VIA SOFTWARE. FORMAT: 19"X9UX620MM; 99KG.

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 7;5KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 11KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 355 X 140 X 165 (HXLXP); FSC INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

FANUC SERVO AMPLIFIER A06B-6250-H018 INPUT 3 PH 380-480 VAC 50-60 HZ 4A AMP OUTPUT 537-679 VDC 21 KW

AS-INTERFACE COMBINED POWER SUPPLY UNIT IP20;AS-I DC30V; 3.5A; WITH DATA DECOUPLING DC24V; 4.5A (PRIMARY CLOCKING) INPUT VOLTAGE 230V

ALIMENTATION À DÉCOUPAGE INTÉGRÉE 240W; 1 SORTIE À 30V C.C. 8A ENTRÉE 80 A 260VAC

REDRESSEUR MONOPHASE; FILTRE; DC 24V/3A PRI 400V/230V AVEC PRISES +/-15V

CADRE OUVERT CONVERTISSEURS C.A./C.C. (C.A.-C.C.) 1 SORTIE 5V 8A 90 ~ 264 V CA ENTRÉE

ALIMENTATION À DÉCOUPAGE INTÉGRÉE 45.6W; 1 SORTIE À 24V C.C. 1.9A

INVERTER DC/AC 1500W VIN=48VDC; VOUT=230VAC

S26113-E503-V50 - FUJITSU POWER SUPPLY 410W

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 5;5KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 7;5KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 291 X 100 X 165 (HXLXP); FSB INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

ALIMENTATION DE LABORATOIRE RACKABLE 19'' RÉGLABLE PROGRAMMABLE RS-232/RS-485 ENSION D'ENTRÉE : 85-265 VAC |47-63 HZ PLAGE DE TENSION SORTIE : 0 - 20 V/DC PLAGE DE COURANT : 0 - 20 V/DC / 0 - 76 A ENTRÉE 85 - 265 V/AC

The equipment with type Alimentation is manufactured by MURRELEKTRONIK and commercialized under the reference TNG60-220/24.The equipment alternative reference is : TNG6022024. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6SL3210-1NE11-7AG1.The equipment alternative reference is : 6SL32101NE117AG1. This product comes from the SINAMICS G120 range. We guarantee the equipment in all the services offered for 12 months.