Servodrive / Starter

SIMOVERT MASTERDRIVES MOTION CONTROL-PERFORMANCE 2 INVERTER UNIT COMPACT PLUS DEVICE IP20 510-650 V DC; 13.2A TYPE RATING: 5.5 KW DOCUMENTATION ON CD-ROM

SINAMICS SINGLE MOTOR MODULE INPUT: 510-720V DC OUTPUT: 3-PHASE AC 0-480V; 605A NOMINAL POWER RATING: 315KW CHASSIS UNIT IP00 INTERNAL AIR COOLING INCL. DRIVE CLIQ CABLE

VARIABLE SPEED DRIVE ATV61 - 5.5KW 7.5HP - 380...480V - EMC FILTER - IP54

SINAMICS G150 CONVERTISSEUR EN ARMOIRE; CA/CA 3 AC 380-480V; 50/60HZ PUISSANCE DE TYPE: 110 KW ALIMENTATION HEXAPHASÉE SANS RÉINJECTION D'ÉNERGIE DANS LE RÉSEAU VERSION C; INCLUANT FILTRE CEM 2. ENVIRONNEMENT; CATÉGORIE C3

637F SERVO DRIVE - 3PH; 460VAC - SINGLE AXIS - RESOLVER FEEDBACK - 16A OUTPUT

MODULE D’AXE DIGIVEX MOTION 8/16

GROSCHOPP REGULATOR FOR BRUSHLESS MOTORS WITH PERMANENT MAGNET ROTOR; DIGITAL 4/6 AMP SECOND GENERATION CAN BUS

FR-SGJ-2-5.5K BR MITSUBISHI SPINDLE DRIVE 5.5KW

PUISSANCE 0.4KW ALIMENTATION 1 X 230 V COURANT NOMINAL=2.5 AMP SURCHARGE 150%; 1 MINUTE AVEC CLAVIER DIGITAL INTEGRE PRODUIT U/F ET COMPENSATION GLISSEMENT ATTENTION: ( CIRCUIT FREINAGE NON INTEGRE ) PRODUIT CE; CEM AVEC FILTRE INTEGRE 2IEME ENVIRONNEMENT MOTEUR JUSQU'A 15M ET FREQUENCE PWM 8KHZ

SEW MOVITRAC 31B055-503-4-00 12;0A 400V 5;5KW

AC SMART SPEED CONTROLLER (SSC); MOTOR RATING 0.37KW / 0.5HP; 2.3A OUTPUT; 200-240V 50/60HZ 3PH INPU

B&R AUTOMATION ACOPOSINVERTER X64 8I64T400037.000-1 0;37 KW 0;5HP V5.1 IE56

ACS601 FREQUENCY CONVERTERS 6KVA 6-PULSE RECTIFIER IP 22 CONTROL PANEL INCLUDE INPUT 380/400/415 VAC

ORIENTAL MOTEUR BMU SERIES DRIVER 60 W SINGLE-PHASE; THREE-PHASE 200-240 VAC

SIEMENS 6SE7031-8TF50-Z SIMOVERT MC INVERTER; DC INVERTER; K01+K11+K80 INCLUDED

BRUSHLESS SERVO AMPLIFIER

COMBIVERT F5 INVERTER 15 KW 23 KVA INPUT 3 PH 440 VAC 50-60 HZ OUTPUT 3 PH 0-440VAC 0-1600 HZ

MITSUBISHI FR-A840-00170-E2-60. 5.5 KW CONSTANT TORQUE DRIVE

LENZE AC TECH SMVECTOR VFD DRIVE INVERTER; 10 HP (7.5 KW) RATED POWER; 240VAC 3 PHASE INPUT; 29A @ 0-500 HZ OUTPUT; NEMA TYPE 4X INDOOR ONLY; 10.0H X 8.0W X 8.0D IN

FANUC SERVO AMPLIFIER A06B-6250-H018 INPUT 3 PH 380-480 VAC 50-60 HZ 4A AMP OUTPUT 537-679 VDC 21 KW

HMS SINGLE-AXIS DRIVE CONTROLLER; LINE:1; DESIGN:1; POWER SUPPLY: WITHOUT; COOLING MODE: AIR; INTERNAL (THROUGH INTEGRATED BLOWER); EFF. PEAK CURRENT: 54A; PROTECTION MODE: IP 20; DC-BUS: DC 700V; OTHER DESIGN: NONE

SINAMICS SINGLE MOTOR MODULE INPUT: 510-720V DC OUTPUT: 3-PHASE AC 0-480V; 985A NOMINAL POWER RATING: 560KW CHASSIS UNIT IP00 INTERNAL AIR COOLING INCL. DRIVE CLIQ CABLE

SIMOVERT MASTERDRIVES SIMOVERT FC 1;0 1.664;25 % INVERTER COMPACT UNIT; IP20 DC 510-620 V 6.1 A NOM. POWER RATINGS: 2.2 KW

OMRON 3G3EV-A4007-CE 2;6KVA

DANFOSS VLT 2015 195H3103 IN 3X208-240V 5;6A OR 1X220-240 8;0 A OUT 3;1A 1;3KVA

DÉMARREURS PROGRESSIFS SIRIUS 200-690 V 171 A; 110-250 V CA BORNES À VIS

COMBIVERT F5 2.2 KW 4.0 KVA INPUT 3 PH 400VAC 8.1A 50/60HZ OUTPUT 3 PA 0-400VAC 5.8 A 0-599HZ

LENZE 9300 SERVO INVERTER 3 AC 400 22.5KW PANEL?MOUNTED UNIT WITH "SAFE TORQUE OFF" FUNCTION

VARIATEUR TYPE ACS RÉF. ACS310-03E-06A2-4 ABB

RÉDUCTEUR AXE 2 & 3; RV320E-31=171; POUR ROBOT ABB IRB2600 IRB4600

DSQC266A : VARIATEUR D'AXE POUR ROBOT ABB S3/S4; TYPE IRB

DSQC266C : VARIATEUR D'AXE POUR ROBOT ABB S3/S4; TYPE IRB

DSQC266U : VARIATEUR D'AXE POUR ROBOT ABB S3/S4; TYPE IRB

DSQC236C : VARIATEUR D'AXE 1; 2; 3 & 7 POUR ROBOT ABB S3; TYPE IRB2000/3000/3200

DSQC236T : VARIATEUR D'AXE 1; 2; 3 & 7 POUR ROBOT ABB S3; TYPE IRB6000

3HAB8101-8/08F DSQC 346 G ABB ATLAS COPCO SERVO DRIVE

HDS SERVO DRIVE CONTROLLER LINE:02; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 40A

VACON NXS FREQUENCY CONVERTERS DRIVE; 12 AMPS; 380-500 VAC; IP21PROTECTION; BRAKE CHOPPER;

MASTERDRIVES SIMOVERT UNITÉ D'ALIMENTATION POUR LE MONTAGE EN PARALLÈLE APPAREIL ENCASTRABLE/IP00 3AC 500-575 V; 50/60HZ 1880A

ABB DRIVE UNIT GT DSQC 346G

VARIATEUR NUMÉRIQUE 16 BITS 7.2A / 400 V (OPTION CT)

SERVO POSITIONING CONTROLLER INPUT 1PH 230 VAC 50-60 HZ OUTPUT 310 VDC 5 AMP

131B8972 DANFOSS DRIVES VLT AQUA DRIVE FC 200 7.5 KW / 10 HP; 380-480 VAC; IP55 / TYPE 12; RFI CLASS A1/B

DANFOSS 175H7403 VARIABLE SPEED DRIVE

POWERFLEX 755; 34A DRIVE;

SIMOVERT MASTERDRIVES SIMOVERT SC ONDULEUR APPAREIL COMPACT; IP20 CC 510-620 V; 34 A PUISSANCE DE TYPE : 15 KW

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR FORME COMPACTE; IP20 510-650 V CC; 59 A PUISSANCE DE TYPE: 30 KW DOCUMENTATION SUR CD

MASTERDRIVES SIMOVERT APPAREIL COMPACT MOTION CONTROL VARIATEUR 3 AC 380-480V; 50/60HZ; 10;2A SUR CD-ROM

SIMOVERT MASTERDRIVES MOTION CONTROL - PERFORMANCE 2 ONDULEUR FORME COMPACTE; IP20; 510-650 V CC; 13;2 A PUISSANCE DE TYPE: 5;5 KW DOCUMENTATION SUR CD

VARIABLE SPEED DRIVE ATV71 - 5.5KW 7.5HP - 480V - EMC FILTER - IP54

3RW30 SOFT STARTER 25A 11KW 400V

DANFOSS 175G5223 SOFT STARTER WITH MOTOR PROTECTION MCD 202-022-T4-CV1; NON REVERSING; 200-440 VAC THREE PHASE 48A; 15HP@230V; CONTROL (COIL) VOLTAGE 110-240 VAC. CURRENT RATING FOR NORMAL(6 SECOND RAMP TIME) IS 48 AMPS AND HEAVY(20 SECOND RAMP TIME) USE IS 46 AMPS. IP20 PROTECTED ENCLOSURE. LENGTH 6.49"D X 7.99"H X 3.85"W.

SIMOREG K CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6)A(B6)C; 3-PHASE; AC 750V CONTROLLABLE FIELD RECTIFIER D790/860 MREQ-GEGF 4V62

PN 22KW; I2N 45A IP54

SV055IG5A-4 LSIS IG5A INVERTER 400V 3 FASE 5.5KW 7;5HP

SIMOVERT MASTERDRIVES MOTION CONTROL - PERFORMANCE 2 INVERTER COMPACT PLUS UNIT; IP20 DC 510V - 650V; 6.1A NOMINAL POWER RATING: 2.2 KW DOCUMENTATION ON CD

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER UNIT COMPACT PLUS DESIGN DEGREE OF PROTECTION IP20 DC510V-650V; 4A NOM. POWER RATINGS: 1.5 KW DOCUMENTATION ON CD; BASE DRIVE FOR ADDITIONAL OPTIONS PLEASE CONTACT OUR SALES STAFF!

590P 4Q DC DRIVE - 110 A; 3PH; 220-500VAC - DC CODEUR CABLÉ ALIMENTATION AUXILLIAIRE 115 À 230 V (+/- 10%) 50/60 HZ

CONVERTISSEURS DE FRÉQUENCE NXL 23 AMP INPUT 3 PH = 380–500VAC 50-60 HZ CHOPPER DE FREINAGE INTERNE

MOVITRAC B 0.37 KW / 0.5 HP INPUT 1 PH 240 VAC 50-60 HZ 2.5 AMP

6SE70211FB20Z DISCONTINUED BY MANUFACTURER AC DRIVE SIMOVERT MASTERDRIVE VECTOR CONTROL COMPACT PLUS 11 A 4 KW 3-PHASE 500-600 V AC 50/60 HZ

2;2KW/1;5KW 1PH 200-240V

YASKAWA V1000 15/11KW NEMA 1 INPUT 3 PH 380-480VAC 50-60 HZ 38/29 AMP OUTPUT 3 PH 0-480VAC 0-400 HZ 31/24 AMP

3AC 400V 1;8KVA

SINAMICS G130 POWER MODULE IP00 3 AC 380-480V; 50/60HZ; 605A PUISSANCE DE TYPE: 315 KW ALIMENTATION HEXAPHASÉE SANS RÉINJECTION D'ÉNERGIE DANS LE RÉSEAU VERSION CIM AVEC CÂBLE DRIVE-CLIQ SANS MODULE DE RÉGULATION

SIMOVERT P MICROMASTER 1/3 AC 230V 50/60 HZ; MM220/2 PUISSANCE NOMINALE 2;2 KW

MITSUBISHI MDS-A-SP-260 VARIATEUR DE BROCHE CNC 37 KW

ALTIVAR MACHINE - VARIATEUR - 11KW - 400V - HAUTE PERF AVEC ETHERNET

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 5;5KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 7;5KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 291 X 100 X 165 (HXLXP); FSB INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

VARIATEUR AC INTÉGRATOR 690+ EUROTHERM DRIVE 4KW TRI 400-460V 9.5A 50/60HZ CARTE À 2 ENTRÉES CODEUR

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR APPAREIL ENCASTRABLE; IP00 675-810 V CC; 66 A PUISSANCE DE TYPE: 45 KW DOCUMENTATION SUR CD

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR FORME COMPACTE; IP20 675-810 V CC; 46;5 A PUISSANCE DE TYPE: 30 KW DOCUMENTATION SUR CD

SIMOVERT MASTERDRIVES SIMOVERT VC ONDULEUR APPAREIL ENCASTR. ; IP00 675-780V CC ; 156A PUISSANCE DE TYPE : 110KW

1;8KVA IN=2;6A P=0;75KW AC 3PH 400V

DANFOSS DRIVES VLT® AQUA FC 200 18;5 KW / 25 CV; 380-480 VAC; IP20FC202P18KT4E20H2XGXXXXSXXXXAXBXCXXXXDX

DIGITAL COMPACT SERVO DRIVE 2-AXIS MODULE 100-480 V AC RATED OUTPUT CURRENT 2 X 6 A ETHERCAT INTERFACE OCT HARDWARE VERSION 2.0 FIRMWARE VERSION 2.06

GRADATEUR CONTROLE 2 PHASES TC2000- NOMBRE DE PHASE : (02) 2 PHASES SUR 3 CONTROLÉES- COURANT DE CHARGE (150A) 150A- TENSION DE CHARGE (400V) 400V- ALIMENTATION AUXILIAIRE (230V) 230V- ENTRÉE CONTINU 0-10V- LANGUE MANUEL (GER) ALLEMAND - FUSIBLES OPTION (FUSE) FUSIBLE STANDARD

SINAMICS G120 CONTROL UNIT CU250S-2 INTEGRATED RS485/USS/ MODBUS RTU SUPPORTS VECTOR CONTROL BASIC POSITIONER EPOS VIA LICENSE EXTENDED FUNCTIONS 4 CONFIGURABLE DI/DO 6 DI (3 F-DI); 5 DI 3 DO (1 F-DO) 2 AI; 2 AO SAFETY INTEGRATED STO; SBC; SS1 ADDITIONAL SAFETY FUNCTIONS VIA "EXTENDED SAFETY" LICENSE ENCODER INTERFACE: D-CLIQ+HTL/TTL/SSI RESOLVER/HTL VIA TERMINAL DEGREE OF PROTECTION IP20 USB AND SD/MMC INTERFACE

VLT 2800 SERIES 0.37KW / 0.5 HP; 1X220-240V 50/60HZ

SINAMICS DCM DC CONVERTER FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 174A CONTROLLABLE FIELD RECTIFIER D420/210 MREQ-GEGF6V62 OUTPUT: DC 420V; 210A

VARIATEUR DE FRÉQUENCE ALLEN BRADLEY POWERFLEX 523; 0;4 KW 230 V C.A. 1 PHASE; 2;5 A

VARIATEUR DE FRÉQUENCE REF NXL00045C5H1SSS0000

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR FORME COMPACTE; IP20 675-810 V CC; 46;5 A PUISSANCE DE TYPE: 30 KW DOCUMENTATION SUR CD OPTION Z=

DC590+ DRV DC DIGITAL DRIVE 4 Q 110 AMP INPUT 3 PH 220 TO 500V (±10%) 50/60HZ ENCODER (WIRE-ENDED) AUXILIARY MAINS POWER SUPPLY 110 VAC

SIMOREG K CONVERTER F.SINGLE-QUADRANT DRIVES CONNECT.B2HK 1-PH.; AC 220/380V E300/40 MRE-GDE 8-1

131B0522 DANFOSS DRIVES VLT AUTOMATION DRIVE FC 300 2.2 KW / 3.0 HP; 380-500 VAC; IP20 / CHASSIS; RFI CLASS

The equipment with type Variateur / Démarreur is manufactured by PARKER and commercialized under the reference 650V-43145020-B01P00-F2.The equipment alternative reference is : 650V43145020B01P00F2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ALLEN BRADLEY and commercialized under the reference 25B-D2P3N114.The equipment alternative reference is : 25BD2P3N114. This product comes from the POWERFLEX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference FC-202P22KT4E20H1XG.The equipment alternative reference is : FC202P22KT4E20H1XG. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

VLT 5000 VARIABLE SPEED DRIVE 5.5 KVA

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference FC-302N250T5E20H4BGR7XXSXXXXAXBXCXXXXDX.The equipment alternative reference is : FC302N250T5E20H4BGR7XXSXXXXAXBXCXXXXDX. This product comes from the FC 300 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by LENZE and commercialized under the reference Z351CBARBAG215FA8S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by CONTROL TECHNIQUES and commercialized under the reference EP206-P00-ENR0.The equipment alternative reference is : EP206P00ENR0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by B & R and commercialized under the reference 80VD100PD.C188.01.The equipment alternative reference is : 80VD100PDC18801. This product comes from the ACOPOS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference BMH1403P21F1A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

SERVOMOTEURSPOUR VOLETS D'AIR GBB MOUVEMENT LINÉAIRE; 24 V~ / 230 V~

OMRON VS MINI J7 CIMR J7AZ20P4 - VARIATEUR DE FRÉQUENCE - ONDULEUR