Remote control

ELECTROMATIC SB160 115 0.15-3S S SYSTEM INTERVAL DELAY ON TIMER 115VAC SPDT 10A 250VA WITH EXT. AUTO START +RESET ; EXT. TIMING RESISTOR

SINUMERIK 880M/T NC SOFTWARE; MODULE 1; SW 7.2

OBJET DE SECURITE M40X1;5 POUR LECTEUR NON ORIENTE TYPE B LO40B ETUDE 300 COMMANDE PAR CONTACT "F"

CARTE ÉLECTRONIQUE T1HDI01

TÊTE DE COMMANDE POUR INTERRUPTEUR DE POSITION 3SE51/52 TIGE À RESSORT LONGUEUR TOTALE DE 142;5 MM RESSORT = 50 MM; POUSSOIR = 50 MM EN PLASTIQUE

CONTRÔLEUR TEMPÉRATURE PID; N6600; 48 X 48 (1/16 DIN)MM; 100; 240 V C.A. 1; SORTIE ON/OFF

DP-16DO/0.5A-P-2X8 WINBLOC PROFIBUS DP 16 DO; 0.5A; 2 TIER

CÂBLE DE SIGNAUX PRÉCONNECTORISÉ POUR CODEUR 1PH À 660 3X (2X0;14) C+4X 0.14+2X0;5 C CONNECTEUR À FILETAGE COMPLET M23 MOTION-CONNECT 800PLUS CHENILLABLE; UL/CSA; DESINA DMAX = 9;2MM LONGUEUR (M)= TYPE: 6FX8002-2CA61 LONGUEUR (M)= + 0 + 0 + 1 + 0

MODULE 16 ENTREES; 24VDC

CÂBLE DE SIGNAUX PRÉCONNECTORISÉ TYPE: 6FX2002-1AA13 (810D; RÉPARTITEUR 840D À PHG) LONGUEUR (M)= + 0 + 10 + 0 + 0

HEAD MODULE; SAFETYNET P RTFN; SD CARD PL E; SIL CL 3.

KFD2-BR-1.PA.93; ARTICLE 44765; K-SYSTEM

RELAIS SIEMENS LANDIS ET GYR LOA 24 (RÉF. : D403506A) RELAIS SIEMENS LANDIS ET GYR LOA 24. 230V; POUR BRÛLEUR À FIOUL À 1 ET 2 ALLURES. A ASSOCIER AVEC LA CELLULE TYPE QRB RÉF 1721 LA. PROGRAMMATION THERMIQUE. FONCTIONS : RÉPÉTITION; PRÉ-VENTILATIONS 13H; PRÉ-ALLUMAGE 13H. TEMPS ENTRE ÉTAGE I ET II : 16H. CONTACT DE PRÉCHAUFFAGE INCORPORÉ; IDENTIQUE AU RELAS DANFOSS BH062D13. REMPLACE LE RELAI LOA 21 QUI NE RÉPOND PLUS AUX NORMES ACTUELLES.

PC POLYVALENTS DE CONTRÔLE DE POSTE ÉLECTRIQUE

OMRON OPE-VA-44 PHOTOELEKTRIC SWITCH AMPLIFIER

FLOW MONITOR

OPTICAL INCREMENTAL ENCODER; NEMA TYPE 4/TYPE 13; SIZE 25; 210KHZ FREQUENCY RESPONSE (DATA ONLY); 1024 PULSES PER REVOLUTION

SIMATIC HMI TP1200 COMFORT PRO POUR BRAS-SUPPORT (EXTENSIBLE; TUBE ROND) ET EXTENSION UNIT; COMFORT PANEL; COMMANDE TACTILE; ÉCRAN LARGE TFT 12"; 16 MILLIONS DE COULEURS; INTERFACE PROFINET; INTERFACE MPI/PROFIBUS DP; MÉMOIRE DE CONFIGURATION 12 MO; WEC 2013; CONFIGURABLE À PARTIR DE WINCC COMFORT V14 SP1 AVEC HSP

SINAMICS S120 CARTE COMPACTFLASH AVEC OPTION FIRMWARE AUGMENTATION DE PERFORMANCE INCLUANT LA LICENCE (CERTIFICAT DE LICENCE) V4.7 F01 : 1X LICENCE SÉCURITÉ FONCTIONS AVANCÉES

SIEMENS-SCALANCE-6GK5106-2BB00-2AC2-XC106-2-6GK5-106-2BB00-2AC2 MINIATURE 1 SIEMENS SCALANCE 6GK5106-2BB00-2AC2 XC106-2 6GK5 106-2BB00-2AC2

2005 POSITIONING MODULE 3 AXES; EACH AXIS HAS THE FOLLOWING DATA INPUT FOR INCREMENTAL ENCODER 5 V INPUT FREQUENCY 150 KHZ INPUT FOR SSI ABSOLUTE ENCODER ANALOG OUTPUT +/- 10 V; 12 BIT ENCODER SUPPLY 5 VDC OR 24 VDC 4 DIGITAL INPUTS 24 VDC; SINK TRIGGER INPUT 24 VDC; SINK 1 RELAY OUTPUTS 24 VAC / 24 VDC; 1 A

EP7041-3002 ENCODER INCRÉMENTAL 50 V DC; 5 A;

MODULE I/O DI/O; USB ADVANTECH USB-4750-AE

SIMATIC S7-200; E/S TOR EM 223; 16 E TOR / 16 S TOR; 16 E TOR 24V CC/16 S TOR 24V

FAISCEAU 3HAC8010-1 POUR ROBOT ABB 6400R SÉRIE 64-18153

SIEMENS BUS CONNECTION MODULE TXS1.EF10

CARTE ÉLECTRONIQUE POUR AUTOMATISME DE PORTAIL COULISSANT

CARTE CONTRÔLE D’ACCÈS

MODULE 8 ENTRÉES ANALOGIQUE 12BITS 20MA

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

RELAIS SANS ACCROCHAGE G2RV; 24V AC/DC; 1 RT; RAIL DIN

BUSBAR; TOUCH-SAFE FOR N MINIATURE CIRCUIT BREAKER 5SX 210 MM LONG WITH END CAPS FOR 12 MW; 10 MM2 CU; 3-PHASE

POSITION SWITCH PLASTIC ENCLOSURE 40 MM ACCORDING TO EN 50041 DEVICE CONNECTION 1X (M20 X 1.5) 2 NO/1 NC SLOW-ACTION CONTACTS ROLLER PLUNGER; PLASTIC WITH PLASTIC ROLLER 13 MM

SIGNAL CABLE; PREASSEMBLED SIGNAL CABLE; PREASSEMBLED TYPE: 6FX5002-2DC10 (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67; WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 0 + 0 + 4 + 0

SIMATIC PANEL PC 677B 2X10/100/1000 MBIT/S ETHERNET 4XUSB V2.0; 1 X SERIE (COM1) 17' TACTILE; 1280 X 1024 SANS INTERFACE USB EN FACADE BLOC SECTEUR 110/230V CA AV. NAMUR; CABLE SECTEUR EUROPE CORE 2 DUO T5500; 1;66 GHZ CACHE 2MO; 2 X

B & R SYSTÈMES I/O COMMUNICATION INTERFACE MODULE CS1020

DÉPART-MOTEUR COMPACT AS-I IP65 ÉLECTROMÉCANIQUE DÉMARREUR-INVERSEUR PLAGE DE RÉGLAGE 2;2...3;2 A AC-3; 1;1KW / 400V SANS CONTACT DE FREINAGE AVEC SORTIE MOTEUR À 9 PÔLES ET RACCORDEMENT D'ÉNERGIE À 9 PÔLES AVEC 2 ENTRÉES INTÉGRÉES

DISPOSITIFS VISUELS ÈLECTRIQUES D'EXTINCTION ALINE30 AFFICHE ENTRÈE INTERDITE FR6:LB708080008

LOOP MODULE CONTROLLER 4INPUT 6OUTPUT MLC9000Z4660 DISCONTINUED BY MANUFACTURER LOOP MODULE 4 INPUT 6 OUTPUT MLC900+ 10-30 V DC

C6930 | CONTROL CABINET INDUSTRIAL PC

OMRON G2RV RELAIS SANS ACCROCHAGE 1 RT; BOBINE 24V C.A. / V C.C. RAIL DIN 500MW

RELAIS DE SÉCURITÉ WIELAND 24 V (C.A./C.C.); 2 CANAUX; 3 CONTACTS

The equipment with type Automate is manufactured by SELECTRON and commercialized under the reference PMC 22 ED.The equipment alternative reference is : PMC22ED. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by WAGO and commercialized under the reference 750-564.The equipment alternative reference is : 750564. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6ES7215-1AF40-0XB0.The equipment alternative reference is : 6ES72151AF400XB0. This product comes from the SIMATIC S7 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by JM CONCEPT and commercialized under the reference XALIS 9000U1.The equipment alternative reference is : XALIS9000U1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by UNITRONIC and commercialized under the reference EX-RC1.The equipment alternative reference is : EXRC1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by B & R and commercialized under the reference X67DM9331.L12.The equipment alternative reference is : X67DM9331L12. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 5SY4502-7.The equipment alternative reference is : 5SY45027. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by JENSEN and commercialized under the reference CT 1114.The equipment alternative reference is : CT1114. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 3RV2011-0EA15.The equipment alternative reference is : 3RV20110EA15. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 6GK5992-2GA00-8AA0.The equipment alternative reference is : 6GK59922GA008AA0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Rack is manufactured by B & R and commercialized under the reference CT 1193-11.The equipment alternative reference is : CT119311. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by JENSEN and commercialized under the reference CT 1163.The equipment alternative reference is : CT1163. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by JENSEN and commercialized under the reference CT 1501.The equipment alternative reference is : CT1501. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Coupleur is manufactured by TELE and commercialized under the reference BW400VDA5X. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Coupleur is manufactured by SIEMENS and commercialized under the reference 6BK1623-0AA00-0AA0.The equipment alternative reference is : 6BK16230AA000AA0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference GV3P651. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 6FX8002-8QN08-1BJ0.The equipment alternative reference is : 6FX80028QN081BJ0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by ABB and commercialized under the reference 3BSE020848R1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by ETIC and commercialized under the reference XSLAN-1400.The equipment alternative reference is : XSLAN1400. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by PANASONIC and commercialized under the reference AY17223. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by HONEYWELL and commercialized under the reference FFSLU100T2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by GE FANUC and commercialized under the reference IC695CRU320-EN.The equipment alternative reference is : IC695CRU320EN. This product comes from the RX3I range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NX-SIH400.The equipment alternative reference is : NXSIH400. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference I764RT5K. This product comes from the TSX PREMIUM range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by SIEMENS and commercialized under the reference MXG461.15-0.6.The equipment alternative reference is : MXG4611506. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by B & R and commercialized under the reference 7TB710.9.The equipment alternative reference is : 7TB7109. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SCAIME and commercialized under the reference PT9420-1000-111-1110.The equipment alternative reference is : PT942010001111110. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by ALLEN BRADLEY and commercialized under the reference 1762-IQ8OW16.The equipment alternative reference is : 1762IQ8OW16. This product comes from the MICROLOGIX 1400 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference IC200MDL742D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by GE FANUC and commercialized under the reference IC660EBA025A. This product comes from the GENIUS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by BECKHOFF and commercialized under the reference EP1908-0002.The equipment alternative reference is : EP19080002. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference TSXDSY64T2KC. This product comes from the TSX PREMIUM range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by GE FANUC and commercialized under the reference IC655MDL502A. This product comes from the SERIES FIVE range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference AUZ3.7.The equipment alternative reference is : AUZ37. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by PANASONIC and commercialized under the reference AFC8513 USB.The equipment alternative reference is : AFC8513USB. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Automate is manufactured by WAGO and commercialized under the reference 750-362.The equipment alternative reference is : 750362. This product comes from the SYSTÈMES I/O range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by OMRON and commercialized under the reference S8VK C06024.The equipment alternative reference is : S8VKC06024. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference EP-1902.The equipment alternative reference is : EP1902. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference XPSUAK12AP. This product comes from the PREVENTA range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by PHOENIX CONTACT and commercialized under the reference IBS IL 24 RB-T.The equipment alternative reference is : IBSIL24RBT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by PILZ and commercialized under the reference 772160. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by ABB and commercialized under the reference AI815. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by WEIDMULLER and commercialized under the reference 8365940000. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by ALLEN BRADLEY and commercialized under the reference 1734-TOP3.The equipment alternative reference is : 1734TOP3. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by B & R and commercialized under the reference X67DM1321.L12.The equipment alternative reference is : X67DM1321L12. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by SICK and commercialized under the reference MSLS 04-21271.The equipment alternative reference is : MSLS0421271. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference TM7BDM8B. This product comes from the MODICON TM range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ALLEN BRADLEY and commercialized under the reference 5069-L330ERMS2.The equipment alternative reference is : 5069L330ERMS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6EP7133-6AB00-0BN0.The equipment alternative reference is : 6EP71336AB000BN0. This product comes from the SIMATIC ET200SP range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by WAGO and commercialized under the reference 750-563.The equipment alternative reference is : 750563. This product comes from the SYSTÈMES I/O range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 3WL1225-2FG36-1FP2.The equipment alternative reference is : 3WL12252FG361FP2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by HONEYWELL and commercialized under the reference XSL 514.The equipment alternative reference is : XSL514. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by ALLEN BRADLEY and commercialized under the reference 1771-NOV/B.The equipment alternative reference is : 1771NOVB. This product comes from the PLC-5 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by BECKHOFF and commercialized under the reference CX2030-0120.The equipment alternative reference is : CX20300120. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by PULS and commercialized under the reference SL4.100.The equipment alternative reference is : SL4100. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by TELCO and commercialized under the reference LT-100L-AP38-5.The equipment alternative reference is : LT100LAP385. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by AGILENT and commercialized under the reference MSO-X 3024A.The equipment alternative reference is : MSOX3024A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.