List of products by manufacturer GE FANUC

VERSAMAX POWER SUPPLY BOOSTER CARRIER

RX3I PACMOTION MULTI-AXIS MOTION CONTROLLER IC695PMM335

24/48V

GE FANUC SERIE 90-70 RTD 4 CHANNEL ISOLATED 3 OR 4 WIRE INPUT

RESISTANCE TEMPERATURE DEVICE INPUT MODULE

LOGICMASTER 90-70; DOS VERSION; SERIAL COMMUNICATIONS

SERIES ONE JUNIOR PROGRAMMING KIT; INCLUDES: PORTABLE LCD PROGRAMMER (IC610PRG110); SERIES ONE JUNIOR PROM (PRG115); HAND-HELD PROGRAMMER (PRG105); INTERFACE CABLE

CARTE REFLECTIV MEMORY POUR MULTIBUS

OUTPUT; RELAY 3.0A; 1PT

ENTREE LOGIQUE 48V

FIELD BUS INTERFACE

OPERATOR INTERFACE 6INCH BLUE 24VDC

GE FANUC 6 CURRENT SOURCE OUTPUTS 24/48V DC 0.6A MAX

24/48 VOLT DC; VOLTAGE/CURRENT GENIUS ANALOG I/O BLOCK

GENIUS 12-24VAC/DC INPUT; POSITIVE LOGIC (32 POINTS)

MINI CONVERTER KIT FOR ALSPA 8000; RS 422(SNP) TO RS232

CABLE KIT BETA 0.5 MOTOR / ?-SVU 12/20 5M

GE FANUC VERSAMAX 120/240 VAC POWER SUPPLY EXPANDED3.3VDC

PAC SYSTÈMS HIGH BATTERIY PACK

The equipment with type Entrée/sortie is manufactured by GE FANUC and commercialized under the reference IC200UDD110. This product comes from the VERSAMAX MICRO range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Etude is manufactured by GE FANUC and commercialized under the reference 44A745333-G02.The equipment alternative reference is : 44A745333G02. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by GE FANUC and commercialized under the reference IC600CB500. This product comes from the SERIES SIX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by GE FANUC and commercialized under the reference IC200ACC414A. This product comes from the VERSAMAX MICRO range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference IC200PNS001-AC.The equipment alternative reference is : IC200PNS001AC. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

PLC RELAY OUTPUT 12/24VDC 0.5A 32PT

I O BUS TERMINATOR PLUG

12/24 VOLT DC POSITIVE LOGIC ESCP OUTPUT - 1 AMP; 16 POINT.

I/O LINK INTERFACE MODULE (SLAVE)

ANALOG INPUT; CURRENT; 4 CHANNELS

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

MODULE ENHANCED COMMUNICATION

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

PLATINE UC 10 EMPLACEMENTS; MODÈLE 331/341

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

PROGRAMMABLE COPROCESSOR MODULE; 192 KBYTE (47 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE)

AXIS POSITIONING MODULE (APM); 1 AXIS

VERSAMAX REMOTE I/O PROFIBUS DP NETWORK INTERFACE UNIT IC200P

IC697CHS790G

GE FANUC RX7I PENTHIUM M CPU 600 MZ MODBUS RTU SLAVE; SNP; SERIAL I/O RS-232; RS-486. ETHERNET INTERFACE

GE FANUC ANALOG OUTPUT VOLTAGE; 8 CHANNEL; +/-10V; 0 TO 10V

CABLE NUMERO DE SÉRIE: 90-30 COULEUR: NOIRE LONGEUR: 3 MÈTRE SYSTÈME: RX3I

BLOC TERMINAL AVEC CONNECTEUR DE CABLE NUMERO DE SÉRIE: 90-30 COULEUR: NOIRE NOMBRE DE POINT: 32

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC200MDL241E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference CE670FBI002-BB.The equipment alternative reference is : CE670FBI002BB. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC697PWR712H. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC697MEM733E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference HE693XTADP. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC697BEM711J. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by GE FANUC and commercialized under the reference IC697 ALG440D.The equipment alternative reference is : IC697ALG440D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by GE FANUC and commercialized under the reference IC752WTE000D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by GE FANUC and commercialized under the reference IC694TBS032E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference IC697CPU771K. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference IC200PWR102K. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by GE FANUC and commercialized under the reference IC200ALG240-KE.The equipment alternative reference is : IC200ALG240KE. This product comes from the VERSAMAX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by GE FANUC and commercialized under the reference IC200CHS001N. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC697BEM713F. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC600BF831K. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by GE FANUC and commercialized under the reference IC610CBL105. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by GE FANUC and commercialized under the reference IC655CBL500. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CONTRÔLE COMMANDE is manufactured by GE FANUC and commercialized under the reference IC655CHS508A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

CF693MBM100 MODBUS COMMUNICATION MODULE

ELECTRONIC ASSEMBLY FOR GENIUS I/O BLOCK IC660BBD024; 12/24 VDC; SOURCE I/O; 32 CIRCUIT.

GENIUS 24 VAC/DC VOLTAGE/CURRENT 4 INPUT/2 OUTPUT ANALOG BLOCK

DSM302 MOTION CONTROLLER; 2 AXIS

IC693CPU352 SINGLE SLOT CPU MODULE; 240K BYTES CONFIGURABLE USER MEMORY; 4K I/O 25MHZ PROCESSOR SPEED

CPU 341 MODULE (80K BYTES USER MEMORY); 10K REGIST

LOGICMASTER ONE PROGRAMMING SOFTWARE; PROGRAMS SERIES ONE CPU104; CPU105; CPU106

6 CHANNEL RTD INPUT MODULE FOR SERIES 90-30 WITH 700VDC BUS-ISOLATION

SUBSTITUT IC690USB901-SUB/IC690USB901SUB

CPU MODULE240K USER MEMORY

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

120/240VAC 125VDC 30W STD

2 TWO-AXIS POWER MATE APM (PM-APM) IS A TWO AXIS MOTION CONTROL MODULE THAT IS HIGHLY INTEGRATED WITH THE LOGIC SOLVING AND COMMUNICATIONS FUNCTIONS OF THE IC693 PLC. TWO PRIMARY CONTROL LOOP CONFIGURATIONS ARE PROVIDED; STANDARD MODE AND FOLLOWER MODE

RX3I DC VOLTAGE OUTPUT MODULE; 12/24V; 0.75A; 32 POINT

GE FANUC RX3I 1GHZ CENTRAL PROCESSING UNIT WITH HOT STANDBY REDUNDANCY

EMERSON IC695CPE302 RX3I CPE302 1 SERIAL 1 ETHERNET PORTS

RX3I CONTROL MEMORY XCHANGE MODULE FOR PEER TO PEER NETWORK. 128MEGBYTES OF USER SHARED MEMORY.

SERIES 90-30 OUTPUT RELAY 2A 16PT

SERIES 90-30 OUTPUT RELAY 2A 16PT

ANALOG COMBO MODULE 4IN/2OUT

IC697CMM741 / MMS-ETHERNET CONTROLLER

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

SERIES 90-30 OUTPUT RELAY 2A 16PT

PACSYSTEMS RX3I POWER SUPPLY IC695PSD140 MULTIPURPOSE 40 WATT

GE FANUC SERIES 90-30 IC693TCM302 CONTROL MODULE 8 THERMOCOUPLE INPUT

CARTE THERMOCOUPLE

GE FANUC GENIUS BUS EXPANSION MODULES

CENTRAL PROCESSING UNIT 512 DISCRETE I/O 12 MHZ 21 KBYTE CPU SERIES 90-70 IC697CPU731

GENUIS HIGH-SPEED COUNTER BLOC

GE FANUC 90-70 IC697MEM715 PROVIDES 128 KBYTES OF MEMORY

GENIUS I/O BUS CONTROLLER IC697BEM731V

GE FANUC SERIE 90-70 RTD 4 CHANNEL ISOLATED 3 OR 4 WIRE INPUT

VERSAMAX MICRO PLC RELAIS AC 14 POINTS

AUTOMATE