List of products by manufacturer SEW EURODRIVE

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 11 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : STANDARD

MODULE D’AXE MAS51A030-503-00 I NOMINAL 30 A; U NOMINALE 3X 500 VAC

MODULE D’AXE MAS51A060-503-00 I NOMINAL 60 A; U NOMINALE 3X 500 VAC IPOS INTÉGRÉ

TYPE SERIES : 31VERSION : CRECOMMENDED MOTOR POWER : 5.5KW RATED SUPPLY VOLTAGE : 380...500VACTYPE OF SUPPLY : THREE-PHASE4 QUADRANTSSTANDARD VERSION

MOVIDYN COMPACT SERVO CONTROLLER 3 X 380-500 VAC+10 % 50-60 HZ 5 % 5 A

OPTION USS11A SERIELL-PORT RS232

MOVITRAC B 0.37 KW / 0.5 HP INPUT 1 PH 240 VAC 50-60 HZ 2.5 AMP

INTERFACES BUS DE TERRAIN ET MODULES RÉPARTITEUR DE BUS PROFIBUS

AC DRIVE MOVITRAC 5;1 KVA IN: 3X 380-500VAC 50/60HZ 6;7A OUT: 3X 0-UIN VAC 0-400HZ 7;3A

CARTE BUS TERRAIN PROFIBUS

MOVIDRIVE POWER SUPPLY MDX60 INVERTER 3KW 3 PHASE 380-500VAC

MOVIDRIVE® INPUT VOLTAGE: 3XAC 380-500 V RATED LINE CURRENT: AC 28.8 A (AT U = 400 V; AC 36.0 A) OUTPUT POWER: 15 KW OUTPUT CURRENT: 32 A NUMBER OF MAINS PHASES: 3 PROTECTION RATING: IP20 TECHNOLOGY VERSION DEVICE TERMINALS CROSS-SECTION X1;

MOVITRAC POWER SUPPLY MDX60 INVERTER 1.5KW 3 PHASE 380-500VAC

MOVITRAC B 400V 3-PHASE 0.55 KW / 0.75 HP OUTPUT AC 2.0 A SIZE 0S OPTION SAFETY STOP

MOVIDRIVE REGULATION VECTORIELLE AVEC RESOLVER MODE SERVO 15 KW

VFC AC DRIVE VERSION A 3 KW STANDARD 3 X 380-500 VAC INPUT FILTER 4Q (WITH BRAKE CHOPPER)

MOVIDYN MA5010FD00

MODULE DE CONNEXION

MOVITRAC OUT: 2;4 A; 0;75KW

FIELD-ORIENTED CONTROL MODE WITHOUT AND WITH ENCODER FORASYNCHRONOUS MOTORS VFC AND CFC OPERATING MODES (CFC = CURRENT FLUX CONTROL) TYPE 60 VERSION A 4Q (WITH BRAKE CHOPPER) 30 KW 3X 380...500 VAC

POWER SUPPLY MOVIDYN 55KW INPUT 480/500VAC 83 A 50/60HZ OUTPUT 550-700VDC 100 AMP

MOVITRON DC DRIVE 9 AMP

MOVIDRIVE MDX61B 1.4 KW 4Q 3 PH AC 380 ... 500 V+ OPTION DEH11B

MOVIDRIVE MD FLUX CONTROL MODE WITH RESOLVER FOR SYNCHRONOUS MOTORS SERVO OPERATING MODES 380...500 VAC 11 KW 4Q (WITH BRAKE CHOPPER)

VARIATEUR 4 KW / 7;4 HP. 12;5 A MOVITRAC

SEW MOVITRAC INVERTER 1.4 KVA IN: 3X380-500VAC 50/60HZ 1;6A OUT: 3X 0-UIN VAC 0-400HZ 2;0A

ADVANCED DHE41B CONTROLLER

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 7.5 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : STANDARD

SEW EURODRIVE MOVIMOT AC MOTOR 0.37 KW CONTROLLER; 1.3 AMP; 0.5 HP; 380/500 VAC;

DOP11B DRIVE OPERATOR PANEL 5.7" VGA 320 X 240 PIXEL MONO

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 7.5 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : TECHNOLOGIQUE .

MOVITRAC TYPE MC - SÉRIE 07 VERSION A - POWER 2;2KW - CONNECTION VOLTAGE : 380…500VAC - RADIO INTERFERENCE SUPPRESSION A - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - TYPE : STANDARD

SEW EURODRIVE 8257221 RECTIFIER 1.5 AMP 150-500 V.A.C

MPB POWER SUPPLY MODULE BRAKE CHOPPER 3 X 380-500 VAC +10% 50 HZ/60 HZ 5 % 11KW 16 A

INTERFACE BUS DE TERRAIN PROFIBUS-DP

MOVIDRIVE MODULE DE PUISSANCE 11 KW 21.6A 0-180HZ 16.8KVA

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 0.75 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : STANDARD

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 37 KW - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : STANDARD

SEW EURODRIVE ENCODER INTERFACE DIP11B

MOVITRAC POWER SUPPLY MDX60 INVERTER 37KW 3 PHASE 380-500VAC

MOVIDRIVE HIPERFACE ENCODER CARD OPTION.

MOVITRAC 1.4 KVA

FIELD-ORIENTED CONTROL MODE WITHOUT AND WITH ENCODER FORASYNCHRONOUS MOTORS VFC AND CFC OPERATING MODES (CFC = CURRENT FLUX CONTROL) TYPE 60 VERSION A 4Q (WITH BRAKE CHOPPER) 15 KW 3X 380...500 VAC

MOVIDYN COMPACT SERVO CONTROLLER 3 X 380 VAC-10% ... 500 VAC+10 % 50/60 HZ 5 % 15 A

CARTE INTERBUS MOVITRAC

MOVITRAC 07 7.5 KW / 10 HP 16A INPUT 3PH 400VAC 50-60Z

MOVITRAC AC DRIVE 31B022-503-4-00 3.8 KVA

MOVIMOT OPTION MODULE MLG11A

FIELDBUS INTERFACE ETHERNET / IP 18213464

IFELD-ORIENTED CONTROL MODE WITHOUT AND WITH ENCODER FORASYNCHRONOUS MOTORS VFC AND CFC OPERATING MODES (CFC = CURRENT FLUX CONTROL) TYPE 60 VERSION A 4Q (WITH BRAKE CHOPPER) 11 KW 3X 380...500 VAC

VFC AC DRIVE VERSION A 4 KW STANDARD 3 X 380-500 VAC INPUT FILTER 4Q (WITH BRAKE CHOPPER)

MOVITRAC INPUT 1X 200-240V 8;5A OUTPUT 3X 0...UIN 3;3A 0.55KW

MOVITRAC LTPB 15KW / 20HP

VARIATEUR

VARIATEUR

SEW EURODRIVE CIRCUIT BOARD 08243182 BAUST 1916

VARIATEUR - DRIVE

BOX SPEED REDUCER

0.37 KW 1380/13 TR/MIN 94.08 M5A 20557112

CODEUR

MOVIGEAR PARALLEL SHAFT HELICAL GEAR UNIT MGFAS2-DSM

The equipment with type AUTRE is manufactured by SEW EURODRIVE and commercialized under the reference 8221049,13.The equipment alternative reference is : 822104913. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by SEW EURODRIVE and commercialized under the reference 8224838,19.The equipment alternative reference is : 822483819. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

MOVIDRIVE MDF; SERIES 60; VERSION A; 2.2 KW; 380…500VAC; 3PHASE

MOVITRAC B INVERTER DRIVE; 0.55 KW / 0.74 HP; AC 2.0 A

VFC AC DRIVE VERSION A 1.5 KW STANDARD 3 X 380-500 VAC INPUT FILTER 4Q (WITH BRAKE CHOPPER)

MOVIDRIVE MDR; SERIES 60; VERSION A; 75.0 KW; 380…500VAC; 3PHASE

MOVITRAC LTE 7.5 KW 4Q 380 V ... 480 V ± 10 %; 3 PH; 50 ... 60 HZ ± 5 %

FIELD-ORIENTED CONTROL MODE WITHOUT AND WITH ENCODER FORASYNCHRONOUS MOTORS VFC AND CFC OPERATING MODES (CFC = CURRENT FLUX CONTROL) TYPE 60 VERSION A 4Q (WITH BRAKE CHOPPER) 2.2 KW 3X 380...500 VAC

RESISTANCE 100 OHM 600W

3.0KW

MOVIDRIVE MD FLUX CONTROL MODE WITH RESOLVER FOR SYNCHRONOUS MOTORS SERVO OPERATING MODES 380...500 VAC 11 KW 4Q (WITH BRAKE CHOPPER) DESIGN TECHNOLOGIQUE

MC07B0040-5A3-4S0 AC DRIVE INVERTER MOVITRAC B 4.0 KW (5 HP) 380-500 VAC SUPPLY 50/60 HZ SUPPRESSION C2 3 PHASE 4Q WITH BRAKE CHOPPER SAFE STOP

MOVIDRIVE B 3-PHASE 400V 2.2KW 3.0HP OUTPUT AC 5.5A SIZE 0L

MOVIDRIVE COMPACT 5.5KW AC 380 ... 500 V 4Q (WITH BRAKE CHOPPER) FIELD-ORIENTED WITH RESOLVER FOR SYNCHRONOUS MOTOR; SERVO OPERATING MODES

MOVITRAC INPUT VOLTAGE: 200 - 240V OUTPUT POWER: 2;2KW OUTPUT CURRENT: 8;6A NUMBER OF PHASES: 3 ENCLOSURE CLASS: IP20

The equipment with type Variateur / Démarreur is manufactured by SEW EURODRIVE and commercialized under the reference MOVITRAC307. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Carte is manufactured by SEW EURODRIVE and commercialized under the reference 8227772.14.15.The equipment alternative reference is : 82277721415. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Carte is manufactured by SEW EURODRIVE and commercialized under the reference DCS22B. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by SEW EURODRIVE and commercialized under the reference DFI INTERBUS-S.The equipment alternative reference is : DFIINTERBUSS. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

SEW EURODRIVE MOVIMOT MM05D-503-00 18215009/0;55KW DRIVE INVERTER

SERIE MDX61 VERSION B - POWER : 0.55 KVA - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : TECHNOLOGIQUE REIME IT

MOVIDRIVE B INPUT VOLTAGE: 3XAC 380-500 V RATED LINE CURRENT: AC 41.4 A (AT U = 400 V; AC 51.7 A) OUTPUT POWER: 22 KW OUTPUT CURRENT: 46 A NUMBER OF MAINS PHASES: 3 TYPE OF PROTECTION: IP20 DEVICE TERMINALS CROSS-SECTION X1; X2; X3; X4: BOLT

AC DRIVE MOVITRAC UIN 3*380V...500VAC F=50...60HZ I=1.9A (400VAC) UOUT 3* 0..UIN F= 0..400HZ I= 2.5A (400VAC)

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 0.55 KVA - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : TECHNOLOGIQUE

SERIE MDX61 (OPTION CAN BE INSTALLED) - VERSION B - POWER : 0.75 KVA - SUPPLY VOLTAGE : 380…AC 500V - 3 PHASE - 4 QUADRANTS (WITH BRAKE CHOPPER) - DESIGN : TECHNOLOGIQUE

MDX61B0008-5A3-4-0T/DEH11B/DFP

FIELD-ORIENTED CONTROL MODE WITHOUT AND WITH ENCODER FORASYNCHRONOUS MOTORS VFC AND CFC OPERATING MODES (CFC = CURRENT FLUX CONTROL) TYPE 60 VERSION A 4Q (WITH BRAKE CHOPPER) 37 KW 3X 380...500 VAC.