List of products by manufacturer SIEMENS

PRESS SAFETY PROGRAM FOR AG95 F/P; PACK. 2 BASIC VERSION FOR MECHANICAL/HYDRAUL. PRESSES 3.5? MS-DOS DISKETTE

PC TACHOGRAPH MS-DOS UNIT; 3.5? MS-DOS UPDATE

SOFTWARE FOR MASTER PLC LINKING SIMATIC S5-115U/135U/155U 3.5? MS-DOS; SINGLE LICENSE

COM PSIDIAG DIAGNOSTICS PACKAGE WITH GRACIS INTEGRATION (PG710 TO PG770 AND OP40-SM) SINGLE LICENSE 3.5? MS-DOS

COM PSIDIAG DIAGNOSTICS PACKAGE WITH GRACIS INTEGRATION (PG710 TO PG770 AND OP40-SM) UPDATE 3.5? MS-DOS

GRACIS WINDOWS CONFIGURATION FOR MS-WINDOWS 3.1/3.11 FOR PG/PC; GERMAN; ENGLISH UPGRADE 3.5? MS-DOS

ACCESSORIES FOR SINUMERIK 805SM-P/WS510P CABLE FROM CAM CONTROLLER TO SENSOR; CABLE END LOOSE L = 25 M

CONNECTING CABLE FROM ACTUAL-VALUE DISTRIBUTOR TO ENCODER; OPEN CABLE END L = 18 M

ACCESSORIES FOR SINUMERIK 805SM-P/WS510P CABLE FROM CAM CONTROLLER TO CAM OUTPUT;CABLE END LOOSE L = 5 M

ACCESSORIES FOR SINUMERIK 805SM-P/WS510P CABLE FROM CAM CONTROLLER TO CAM OUTPUT;CABLE END LOOSE L = 18 M

ACCESSORIES FOR SINUMERIK 805SM-P/WS510P CABLE FROM PRINT-SUBMODULE TO ANALOG ENCODERS; OPEN END 25 M

STANDARD A FOR WF 700 S5-115U(CPU 941-945)/135U/155U S7-400; 3.5? UPDATE

STANDARD I-715 SIMATIC S5 LINKING WITH WF 715 SIMATIC S5-115U/135U/155U UPDATE 3.5? MS-DOS

WF 723 POSITIONING MODULE 3 AXES; FOR SERIAL-ABSOLUTE AND INCREMENTAL ENCODERS WITH ADAPTER CASING FOR APPLICATION IN ISKAMATIC S7-400

SOFTWARE COM 723; PC OPEN-LOOP CONTROL; FOR WF721/WF723A/B/C ENGLISH; FOR SIMATIC S5 3.5 DISK; UPDATE

SOFTWARE COM 723; PC OPEN-LOOP CONTROL; FOR WF721/WF723A/B/C FRENCH; FOR SIMATIC S5 3.5; UPGRADE

SOFTWARE COM 723; PC OPEN-LOOP CONTROL; FOR WF721/WF723A/B/C FRENCH; FOR SIMATIC S7 3.5; SINGLE LICENSE

STANDARD B-470 F. WF 721/723A S5 AND SCREEN MASKS; ENGLISH S5-115U(CPU 941-945)/135U/155U SINGLE LICENSE 3.5? MS-DOS

SOFTWARE COM 726 GERMAN SINGLE LICENSE 3.5? MS-DOS

SOFTWARE COM 726 ENGLISH UPDATE 3.5? MS-DOS

STANDARD III-726 FOR WF 470 S5-115U(CPU 943-945)/135U/155U MASKS GER/ENGL/FR/IT/SP/RS UPDATE 3.5? MS-DOS

CONNECTING CABLE WF TO ABS. POS.ENCODER; PARALL. L = 18 M

SIGNAL CABLE; PREASSEMBLED (SSI ABSOL. ENCODER 6FX2001-5) 4X2X0.38+4X0.5 C CONNECTOR ON MEAS. SYSTEM END L = 5 M

SINUMERIK 840C/840CE FB PACKAGE 1: TOOL MANAGEMENT ON 3.5? DISKETTE DOS-FORMAT SOFTWARE VERSION 22 SINGLE LICENSE

SINUMERIK 840C/840CE/880 FB PACKAGE 9 MMI VARIABLE SERV. ON 3.5? DISK; DOS FORMAT SW VERSION 14 SINGLEL LICENSE

SINAMICS S120 DOUBLE MOTOR MODULE ENTREE: 600V CC SORTIE: 3PH 400V CA; 3A/3A FORME BOOKSIZE COMPACT REFROIDISSEMENT A AIR INTERNE FORMES D IMPULSION OPTIMISEES ET SUPPORT DE FONCTIONS SAFETY (SECURITE) DE QUALITE AVEC CABLE DRIVE-CLIQ

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W MILLING MADE EASY WITH SHOPMILL; EDITION 08.06; ITALIAN

SINUMERIK 840D/840DI/810D DOCUMENTATION S/W MILLING MADE EASY WITH SHOPMILL; EDITION 10.03; KOREAN

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W MORE SIMPLY MILLING WITH SHOPMILL EDITION 08.06; CHIN.SIMPL.

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR MILLING MADE EASY WITH SHOPMILL; EDITION 08.06; ENGLISH

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR MILLING MADE EASY WITH SHOPMILL; EDITION 08.06; SPANISH

SINUMERIK 840D/840DI/810D DOCUMENTATION FARBIG MORE SIMPLY MILLING WITH SHOPMILL EDITION 10.03; PORTUGUESE

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR MILLING MADE EASY WITH SHOPMILL EDITION 08.06; JAPANESE

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W EASIER TURNING WITH SHOPTURN EDITION 04.04; GERMAN

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W EASIER TURNING WITH SHOPTURN EDITION 04.04; SPAIN

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W MORE SIMPLY TURNING WITH SHOPTURN EDITION 04.04; PORTUGUESE

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W MORE SIMPLY TURNING WITH SHOPTURN EDITION 04.04; JAPANESE

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR EASIER TURNING WITH SHOPTURN EDITION 04.04; SPAIN

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR TURNING MADE EASY WITH SHOPMILL; EDITION 04.04; RUSSIAN

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR EASIER TURNING WITH SHOPTURN EDITION 04.04; JAPANESE

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W FIRST-TIME USER INSTRUCTIONS MILLING AND TURNING EDITION 10.03; GERMAN

SINUMERIK 840D/840DI/810D DOCUMENTATION B/W FIRST-TIME USER INSTRUCTIONS MILLING AND TURNING EDITION 10.03; FRENCH

SINUMERIK 840D/840DI/810D DOCUMENTATION S/W FIRST-TIME USER INSTRUCTIONS MILLING AND TURNING EDITION 10.03; KOREAN

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR FIRST-TIME USER INSTRUCTIONS MILLING AND TURNING EDITION 10.03; GERMAN

SINUMERIK 840D/840DI/810D DOCUMENTATION COLOR FIRST-TIME USER INSTRUCTIONS MILLING AND TURNING EDITION 10.03; KOREAN

SINUMERIK 840D/840DI/810D DOKUMENTATION COLOR STARTERS GUIDE MILLING AND TURNING EDITION 10.03; CZECH

SINUMERIK 840D/810D DOCUMENTATION TOOL AND FORM MANUFACTURE EDITION 04.04; SPANISH

SINUMERIK 840D/810D/840DI/802D SL DOCUMENTATION TOOL AND FORM MANUFACTURE 3-AXIS-MACHINING EDITION 08/07; FRENCH

SINUMERIK 840D/810D/840DI/802D SL DOCUMENTATION TOOL AND FORM MANUFACTURE 3-AXIS-MACHINING EDITION 08/07; KOREAN

SINUMERIK 840C/840CE WINDOWS OEM PACKAGE ON 3.5? DISKS SW VERSION 6.3; UPDATE CONDITION:OEM CONTRACT REQUIRED

SINUMERIK 840C/840CE OFFLINE INSTALLATION SOFTWARE F. MS-DOS PC ON 3.5? DISK SW VERSION 6.1 SINGLE LICENSE

SINUMERIK 840C/840CE DIN-SIMULATION MILLING/DRILLING IN 13 LANGUAGES ON HARD DISK OF MMC-CPU; SW-VERSION 6.3

SINUMERIK 840C/840CE SIMULATION “TOOL PATH” T/M ON HARD DISK OF THE MMC-CPU SW VERSION 6.2

SINUMERIK 840C/840CE WOP MILLING; EXTENSION SWEDISH ON HARD DISK OF THE MMC CPU SW VERSION 6.4

SINUMERIK 840/840C/880 DOCUMENTATION PLC FB PACK. 1/2 TOOL MA.(SW–) EDITION 02.93 GERMAN

SINUMERIK 840/840C/880 DOCUMENTATION COMPUTER LINK; SINPS 231(SW–) EDITION 11.92 GERMAN

SINUMERIK 840/840C/880 DOCUMENTATION COMPUTER LINK; SINPS 315 (SW–) EDITION 04.94 ENGLISH

SINUMERIK 840/840C/880 DOCUMENTATION PLC FB PACK. 7; CODE CAR.(SW–) EDITION 11.92 GERMAN

SINUMERIK 840/840C/850/880 DOCUMENTATION MEASURING CYCLES; FROM VERS.20 SETUP (SW–); EDITION 06/94 ENGLISH

SINUMERIK 840/840C/880 DOCUMENTATION COMPUTER LINK; SUPPLEMENT EDITION 01.94 GERMAN

SINUMERIK 840/840C/ 880 DOCUMENTATION PLC 135WB/WB2/WD; CONFIG.(SW–) EDITION 12.93 GERMAN

SINUMERIK 840C; WINDOWS-DOCUM. ALRM DIALOGUE FOR PC USER’S GUIDE (SW05) EDITION 04.96; ENGLISH

SINUMERIK 840C DOCUMENTATION FUNCTION MACROS (SW01-06) EDITION 01.99; GERMAN

SINUMERIK 840C DOCUMENTATION PLC FB PACKAGE 0 EDITION 01.99; GERMAN

SINUMERIK 840C/611D COMMISSIONING LISTS (SW06) EDITION 09.01; ENGLISH

SINUMERIK 840C; WINDOWS DOCUM. ALARM DIALOGUE FOR PC USER’S GUIDE (SW06) EDITION 03.01; ENGLISH

SINUMERIK 840C DOCUMENTATION OPERATOR’S GUIDE (SW 04) EDITION 03.95 HUNGARIAN

SINUMERIK 840C DOCUMENTATION OPERATOR’S GUIDE (SW05) EDITION 08.96; SPANISH

SINUMERIK 840C; DOCUMENTATION SIMULATION TURNING/MILLING SW05 USER’S GUIDE; EDITION 10.96 GERMAN

SINUMERIK 840C; DOCUMENTATION TURNING/MILLING SIMULATION SW05 USER’S GUIDE; EDITION 09.95 FRENCH

SINUMERIK 840/840C DOCUMENTATION CYCLES; PROGRAMMING GUIDE(SW–) EDITION 04.96; FRENCH

SINUMERIK 840C WINDOWS DOCUM. USER’S GUIDE; OEM (SW05) EDITION 07.96; ENGLISH

SINUMERIK 840C; DOCUMENTATION DIAGNOSTICS GUIDE (SW05) EDITION 04.96; HUNGARIAN

SINUMERIK 840C DOCUMENTATION OPERATING INSTRUCTIONS (SW06) EDITION 09.01; ITALIAN

SINUMERIK 840C DOCUMENTATION PROGRAMMING INSTRUCTIONS (SW 2-6) EDITION 09.01; SPANISH

SINUMERIK 840C; DOCUMENTATION SIMULAT. TURNING/MILLING SW06 USER’S GUIDE EDITION 07.97; ENGLISH

SINUMERIK 840C WINDOWS DOCUMENTATION OPERATOR’S GUIDE (SW06) EDITION 01.99; ITALIAN

SINUMERIK 840C; DOCUMENTATION GRAPH. PROGR. SYSTEM TURNING (SW06); PART 1: PROGR. EXAMPLES; USER’S GUIDE EDITION 07.97; GERMAN

SINUMERIK 840C; DOCUMENTATION GRAPH. PROGRAMM. SYST. TURNING (SW06); PART 1: ROGRAMMING EXAMPLES; USER’S GUIDE EDITION 07.97; FRENCH

SINUMERIK 840C; DOCUMENTATION GRAPH. PROGR. SYSTEM (SW06) ENVIRONMENT DESCRIPTION FOR 840C; EDITION 07.97 GERMAN

SIMATIC IPC 477D AVEC TPM; ÉCRAN TACTILE 15" MULTIPOINT; 4 USB (FACE ARRIÈRE); SANS USB (FACE AVANT); ETHERNET (10/100/1000); ALIMENTATION 24 V CC; (SAUF CHINE) ; CORE I7-3517UE ; ETHERNET 2 GBIT (IE/PN) ; PROFIBUS DP 12 ; 8 GO AVEC NVRAM ; 1X RS-232 ET 1X PCIE ; SANS SYSTÈME D'EXPLOITATION ; SANS LECTEUR REMPLAÇABLE ; SSD 80 GO STANDARD (MLC) ; SANS LOGICIEL SIMATIC ;

CARTE-MÈRE SANS MRAM; CORE I7-3517UE; SANS BUS DE TERRAIN POUR SIMATIC IPC477D

SIMOTICS S MOTEUR SYNCHRONE 1FK7-CT PN=3;8KW ; UCI=600V M0=18NM (100K) ; NN=3000TR/MIN ; À REFROIDISSEMENT PAR CONVECTION NATURELLE FORME DE CONSTRUCTION IMB 5 (IM V1; IM V3) BRIDE 1 CONNECTEUR DE PUISSANCE ORIENTABLE CODEUR ABSOLU 20 BITS + MULTITOUR 12 BITS AVEC INTERFACE DRIVE-CLIQ (ENCODEUR AM20DQI) ARBRE LISSE; TOLÉRANCE N AVEC FREIN À L'ARRÊT INDICE DE PROTECTION IP64

SIMATIC ET 200SP; BASE-UNIT BU20-P12+A0+4B; TYPE DE BU B1; COLISAGE: 1 PIÈCE; BORNES PUSH-IN; SANS BORNES AUX; PONTÉES VERS LA GAUCHE; LXH: 20MM X 117MM

SIMOTICS S SYNCHRONOUS MOTOR 1FK7-CT PN=3;3 KW; UZK=600V M0=16NM (100K); NN=3000RPM; NATURAL COOLING; FRAME SIZE IMB 5 (IM V1; IM V3) FLANGE 1 POWER CONNECTOR ROTATABLE ABSOLUTE ENCODER 20 BIT + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE (ENCODER AM2

SIMOTICS S SYNCHRONOUS MOTOR 1FK7-CT PN=2.3KW; UDC=600V M0=1

SIMOVERT MASTER DRIVES VECTOR CONTROL CHANGE INSTALLER DEVICE REPLACEMENT DEVICE; IP00 DC 510-650V; 590 A TYPES OF PERFORMANCE: 315KW

DÉTECTEUR DE FUMÉE INTERCONNECTABLE SANS FIL AUTONOMIE 10 ANS DELTA REFLEX

CONTACTOR SAFETY COMBINATION FOR SAFETY CIRCUITS ENABLING AND SIGNALLING CIRCUIT 4NO; 1NO+1NC AC OPERATION AC 110V 50/60HZ

SIMODRIVE POSMO A PROGRAMMABLE POSITIONING MOTOR PROFIBUS DP STANDARD SLAVE BRUSHLESS MOTOR 48 V / 300 W PLANETARY GEARBOX I=4 WITH BRAKE IP54;;

SIMOVERT MASTERDRIVES MOTION CONTROL COMPACT UNIT INVERTER; COMPACT UNIT; DEGREE OF PROTECTION IP20 510-650V DC; 59 A; NOM. POWER RATINGS 30 KW; WATER-COOLED OPTION Z=

SECTIONNEUR 440V 6KA; 3 POLES; C; 40A

INTERRUPTEUR AUXILIAIRE CONTACTS INVERSEURS TYPE HQ (7 MM) ACCESSOIRES POUR : 3VA1 ET 3VA20 À 3VA25

SIMATIC PXC200 CAPTEUR CAPACITIF; M30; SN=10MM; AFFLEURANT; 10...65V CC; 4 FILS; PNP; NO+NF; 200MA; IP67; CABLE 2M; METAL AVEC TETE ISOLANTE

SINAMICS V90; WITH PROFINET INPUT VOLTAGE: 200-240 V 1/3-PHASE AC -15%/+10% 2.5/1.5 A 45-66 OUTPUT VOLTAGE: 0 – INPUT VOLTAGE: 1.2 A 0-330 HZ MOTOR: 0.1 KW DEGREE OF PROTECTION: IP20 SIZE A; 45X170X170 (WXHXD)

SIPLUS HMI TP700 OUTDOOR RAIL -25°C...60°C T1 WITH 70°C FOR 10 MIN WITH CONFORMAL COATING BASED ON 6AV2124-0GC13-0AX0. TP700 COMFORT OUTDOOR; COMFORT "PANEL; TOUCH OPERATION; 7""" WIDESCREEN TFT DISPLAY; 16 MILLION COLORS; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 12 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; CONFIGURABLE WINCC COMFORT V13 SP1 AND HIGHER; HSP

SINUMERIK 840D CNC-SOFTWARE 12-5 ON PC-CARD; EXPORT SW-VERSION 7.4; UPDATE/UPGRADE

MOTOR GP 6/4 POLOS 112 MODULOS 0;9KW 50HZ 400V IMB5

SIPART PS2 SMART ELECTROPNEUMATIC POSITIONER FOR PNEUMATIC LINEAR AND PART-TURN ACTUATORS; 2-;3-;4-WIRE; 4...20MA WITH HART-INTERFACE; SINGLE ACTING; ENCLOSURE ALUMINUM; FLAME-PROOF . TYPE OF EXPLOSION PROTECTION: EXPLOSION PROOF CONNECTION THREAD EL.: M20X1.5 / PNEU.: G 1/4 WITHOUT LIMIT MONITOR ANALOG OUTPUT MODULE (AOM); OPTIONALLY AVAILABLE WITH DEVICE PLUG M12 (D CODING) (ORDER CODE: -Z D53) . BRIEF INSTRUCTIONS GERMAN / ENGLISH / CHINESE . WITHOUT MOUNTED PRESSURE GAUGE BLOCK

INDUCTANCE RÉSEAU SINAMICS ENTRÉE: 3 CA 380-480V; 50/60HZ 773A NMA: A5E00125732