SIMATIC HMI LEUKHARDT

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; PROFIBUS DP 12; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE; WINDOWS EMBEDDED STANDARD 2009 PREINSTALLED; WINCC FLEXIBLE RT 512 PT (INCL. ARCHIVES AND RECIPES)

TM1 KEYPAD FOR OP20/240-8 AND MR20

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800 X 600; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE2SOLO 1.2 GHZ; PROFINET(IE); 2 X 1GBIT; PROFIBUS DP 12; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; 50 GB SOLID STATE DRIVE SATA (HIGH ENDURANCE); WINDOWS XP PROF. MULTI-LANGUAGE PREINSTALLED ON SSD; W/O SIMATIC SOFTWARE

CONNECTOR; FEMALE; 2-PIN; 24 V DC FOR SIMATIC HMI PANELS; EXCEPT KEY PANELS; WIRE CROSS-SECTION MM2 UP TO 0.75 AMOUNT: SEE TECHNICAL DATA

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WIT

SIMATIC HMI KP1500 COMFORT; COMFORT PANEL; KEY OPERATION; 15" WIDESCREEN TFT DISPLAY; 16 MILLION COLORS; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 24 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; CONFIGURABLE FROM WINCC COMFORT V11 SP2 PHASED-OUT PRODUCT - REPLACED BY 6AV2124-1QC02-0AX1 CONFIGURABLE FROM V14 SP1

SIMATIC HMI; KTP1200 BASIC; BASIC PANEL; KEY/TOUCH OPERATION; 12" TFT DISPLAY; 65536 COLORS; PROFINET INTERFACE; CONFIGURABLE FROM WINCC BASIC V13/ STEP 7 BASIC V13; CONTAINS OPEN-SOURCE SOFTWARE; WHICH IS PROVIDED FREE OF CHARGE SEE ENCLOSED CD

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 12" TACTILE; 800 X 600 ; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CELERON M 1;2GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 4 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 512 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 15" TOUCH; 1024 X 768; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EUROPE; CELERON P4505 (2C/2T; 1.86 GHZ; 2MB CACHE); PROFIBUS/MPI (CP5611-A2 COMPATIBLE); 2 MB BUFFERED SRAM; 1 GB DDR3 1066 DIMM; 250 GBYTE HDD SATA; W/O OPTICAL DRIVE; 2 X PCI FREE; WITHOUT OPERATION SYSTEM; WITHOUT EXPANSIONS (SW)

STARTER KIT TP700 COMFORT; CONSISTING OF: TP700 COMFORT; WINCC COMFORT (TIA PORTAL); PROFINET-CABLE FOR TESTING; SIMATIC HMI MEMORY CARD 2 GB 10 PROTECTIVE MEMBRANES

STARTER PACKAGE TP 177MICRO COMPRISING: TP 177MICRO; WINCC FLEXIBLE 2008 MICRO; MPI-KABEL FOR TESTING; SIMATIC HMI MANUAL COLLECTION (GER; EN; FR; SP;IT) CONTAINING ALL AVAILABLE MANUALS

STARTER PACKAGE 277 DP PLUS; COMPRISING: MOBILE PANEL 277 W. INTEGR. ENABLING BUTTON; EMERGENCY-STOP BUTTON; HANDWHEEL; KEY SWITCH AND ILLUMINATED PUSHB. UNIT; CONNECTIVITY BOX DP PLUS; CABLE DP 10 M; WALL BRACKET; WINCC FLEXIBLE STANDARD 2008; SIMATIC HMI MANUAL COLLECTION

SIMATIC HMI; MOBIC T8; ENGLISH BASIC PACKAGE CANNOT BE ORDERED SEPARATELY; EMITTED INTERFER. CLASS A; WINDOWS CE ENGLISH

SIMATIC PC; MOTHER BOARD CORE2 SOLO 1;2GHZ PROFINET IE; FOR SIMATIC HMI IPC477C

SIMATIC HMI IPC677C (PANEL PC); 2X ETHERNET 10/100/1000 MBIT/S ; 4X USB V2.0; 1X EN SÉRIE (COM1) ; CHIEN DE GARDE; SURVEILLANCE DE LA TEMPÉRATURE ET DE VENTILATEUR; CONTRÔLEUR RAID INTÉGRÉ ; TOUCHES 15" ; 1024X 768 AVEC INTERFACE USB BLOC D'ALIMENTATION 110/230V CA AVEC NAMUR; CÂBLE D'ALIMENTATION EUROPE CORE I3-330E (2C/4T; 2;13 GHZ; HT; VT; 3MO CACHE) 3 GO DDR3 1066 DIMM; DISQUE DUR SATA 250GO DVD+-R+-RW; 2X PCI LIBRES WINDOWS XP PROF. SP3 MUI (DE; EN; FR; ES; IT) SANS EXTENSION (LOGICIEL)

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 SOLO 1;2 GHZ; PROFINET (IE); 2X 1GBIT; PROFIBUS-DP 12 1 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 4 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 2048 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" KEY; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE I7-610E (2C/4T; 2.53GHZ; TB; HT; VT; 4 MB CACHE) 4 GB DDR3 1066 DIMM; 250 GB HDD SATA WITHOUT OPTICAL DRIVE 2X PCI FREE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE)

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" KEY; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE I7-610E (2C/4T; 2.53GHZ; TB; HT; VT; 4 MB CACHE); PROFIBUS/MPI (CP 5611-A2-COMPATIBLE); 2 MB BUFFERED SRAM 8 GB DDR3 1066 DIMM; ECC; RAID1 2X 320 GB SATA (2.5"); (MIRROR DISKS) DVD+-R+-RW; 2X PCI FREE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" KEY DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS XP PROF. MULTI-LANGUAGE PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WINCC FLEXIBLE RT 512 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIEL (COM1); WATCHDOG; SURVEILLANCE DE TEMPERATURE ET DU VENTILATEUR; CONTROLEUR RAID EMBARQUE; 15" TOUCH; 1024 X 768; AVEC INTERFACE USB EN FACADE; ALIMENTATION 24V CC; CORE I3-330E (2C/4T; 2;13GHZ; HT; VT; 3MO CACHE); 2 GO DDR3 1066 DIMM; SOLID STATE DRIVE SATA 50 GO (SLC); DVD+-R+-RW; 2 X PCI LIBRE; SANS SYSTEME D'EXPLOITATION; SANS EXTENSION (LOG.); OPTION SSD 50 GO N'ETANT PLUS DISPONIBLE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT WITH 8 GB CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" KEY DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 80 GB SOLID-STATE DRIVE SATA (STANDARD) WINDOWS XP PROF. MULTI-LANGUAGE PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" KEY; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CELERON P4505 (2C/2T; 1.86 GHZ; 2 MB CACHE); PROFIBUS/MPI (CP 5611-A2-COMPATIBLE); 2 MB BUFFERED SRAM 1 GB DDR3 1066 DIMM; 250 GB HDD SATA DVD+-R+-RW; 2X PCI FREE WINDOWS XP PROF. SP3 MUI (DE; EN; FR; ES; IT) WITHOUT EXPANSION (SOFTWARE)

IP65 STAINLESS STEEL KEYBOARD MOUNTABLE AT SIMATIC HMI PRO UNITS; WITH NUMBER PAD; LAYOUT: US ADJUSTABLE INCLINATION WIDTH: 483MM (19" PRO UNIT)

SIMATIC HMI IPC477C PRO; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT INTEL CELERON M 1.2 GHZ; 1 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 4 GBYTE CF CARD; WINDOWS EMBEDDED S

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 8 GB WINDOW

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 SOLO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DR

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRI

SIMATIC HMI IPC477C PRO; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT INTEL CORE2DUO 1.2 GHZ; 4 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 32 GBYTE SSD; WIND

SIMATIC HMI IPC 477C PRO OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; FULLY PROTECTED IP65; 4 USB (BACK) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WINCC FLEXIBLE RT 128 PT; (INCL. ARCHIVES AND RECIPES); WINAC RTX F

SIMATIC HMI IPC477C PRO; 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT INTEL CORE2SOLO 1.2 GHZ; 2 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 8 GBYTE CF CARD; WINDOWS EMBEDDED

SIMATIC HMI IPC477C PRO; 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT INTEL CORE2DUO 1.2GHZ; 4GB SDRAM (DDR3); 4X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS234(COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 34GBYTE SSD; WINDOWS

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 80 GB SOLID-STATE DRIVE SATA (ST

SIMATIC HMI IPC 477C 4 USB (BACK) + 1 USB (FRONT); 15" TOUCH DISPLAY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB SOLID-STATE DRIVE SATA (HIGH ENDURANCE) WINDOWS 7 ULTIMATE MUI PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USBS (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12; 4 GB RAM; DDR3; 2ND CF SLOT NOT EQUIPPED;

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 1X 1 GBIT; PROFINET (IRT) 3 PORTS; (SOFTWARE BUNDLES ON REQUEST) 4 GB -RAM

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 2 GB; (NOT WI

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 19" TACTILE; 1280X 1024; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 DUO 1;2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ SSD (SOLID-STATE DRIVE) SATA 80 GO (STANDARD) WINDOWS 7 ÉDITION INTÉGRALE MUI PRÉINSTALLÉ SUR SSD SANS LOGICIEL SIMATIC

SIMATIC HMI IPC477C 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT W. USB INTERFACE INTEL CORE2DUO 1.2 GHZ; 2 GBYTE SDRAM (DDR3); 2 X PROFINET (IE); 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-S

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 110/230 V AC POWER SUPPLY UNIT WITH NAMUR;

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 12" TOUCH DISPLAY ; CORE 2 SOLO 1.2 GHZ; PROFIBUS DP 12; 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB

SIMATIC HMI IPC 577C PCI-SLOT; 4 USB (BACK) + 1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY; ; CELERON M 1;2 GHZ; PROFINET(IE); 2 X 1 GBIT; 1 GB -RAM; DDR3; 2. MASS STORAGE: NOT EQUIPPED; 1. MASS STORAGE: (OPERATING SYTEM OPTIONAL): 320 GB

SIMATIC HMI IPC 577C PCI-SLOT; 4 USB (BACK) + 1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY; ; CORE2SOLO 1.2 GHZ; PROFINET(IE); 2 X 1GBIT; 2 GB -RAM; DDR3; 2. MASS STORAGE: DVD RW; 1. MASS STORAGE: (OPERATING SYTEM OPTIONAL): 320 GB HDD SA

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" TOUCH; 800 X 600; WITH FRONT SIDE USB INTERFACE; DC 24V POWER SUPPLY; CELERON P4505 (2C/2T; 1.86 GH

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" TOUCH; 800 X 600; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EUROPE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 12" KEY; 800 X 600 WITH FRONT SIDE USB INTERFACE; DC 24V POWER SUPPLY; CELERON P4505 (2C/2T

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CELERON P450

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CELERON P450

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I3-330E

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE...

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 15" TOUCH; 1024 X 768; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE...

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" KEY; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I7-610E (

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 19" TOUCH; 1280 X 1024; WITH FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE EURO

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY ; CORE 2 SOLO 1.2 GHZ; PROFIBUS DP 12; 2X 1 GBIT 4 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT WITH 4 GB CF CARD:

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 1 GB -RAM; DDR3; 2ND MASS STORAGE: DVD RW 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB HDD SATA WINXP PROF. PRE-INSTALLED (ONLY POSSIBLE WITH HD OR SSD) WITHOUT EXPANSION (SOFTWARE) 24 V DC POWER SUPPLY

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 15" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFIBUS DP 12; 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE 320 GB HDD SATA+DVD RW 1ST MASS STORAGE: NOT EQUIPPED NO SOFTWARE PRE-INSTALLED POSSIBLE WITHOUT OPERATING SYSTEM WITHOUT EXPANSION (SOFTWARE) 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE

SIMATIC HMI KTP400 COMFORT GEA; COMFORT PANEL; COMMANDE PAR TOUCHES/TACTILE; ÉCRAN TFT LARGE 4''; 16 MILLIONS DE COULEURS; INTERFACE PROFINET; INTERFACE MPI/PROFIBUS DP; 4 MO DE MÉMOIRE DE CONFIGURATION; WINDOWS CE 6.0; CONFIGURABLE À PARTIR DE WINCC COMFORT V11 DESIGN GEA

SIMATIC HMI TP1500 COMFORT GEA; COMFORT PANEL; TOUCH OPERATION; 15" WIDESCREEN TFT DISPLAY; 16 MILLION COLORS; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 24 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; CONFIGURABLE FROM WINCC COMFORT V11 SP2 GEA DESIGN

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 80 GB SOLID-STATE DRIVE SATA (STANDARD) WINDOWS 7 ULTIMATE MUI PRE-INSTALLED ON SSD WITHOUT SIMATIC SOFTWARE

El material del tipo Pupitre opérateur es fabricado por SIEMENS y se comercializa con la referencia 6AV2128-3XB06-0AX0.La referencia alternativa del equipo es : 6AV21283XB060AX0. Este producto proviene de la gama SIMATIC HMI. Garantizamos 12 meses de equipamiento en todos los servicios ofrecidos.

El material del tipo Pupitre opérateur es fabricado por SIEMENS y se comercializa con la referencia 6AV2143-6GB00-0AA0.La referencia alternativa del equipo es : 6AV21436GB000AA0. Este producto proviene de la gama SIMATIC HMI. Garantizamos 12 meses de equipamiento en todos los servicios ofrecidos.

El material del tipo Ecran es fabricado por SIEMENS y se comercializa con la referencia 6AV7410-0AB00-0MB0.La referencia alternativa del equipo es : 6AV74100AB000MB0. Este producto proviene de la gama SIMATIC HMI. Garantizamos 12 meses de equipamiento en todos los servicios ofrecidos.

SIMATIC HMI TP1200 COMFORT INOX STAINLESS STEEL FRONT; CON- TINUOUS DECORATIVE FILM; DEGREE OF PROTECTION FRONT IP66K; 12" WIDESCREEN TFT DISPLAY; PROFINET INTERFACE; MPI/PROFIBUS DP INTERFACE; 12 MB CONFIGURATION MEMORY; WINDOWS CE 6.0; (MICROSOFT SUPPORT INCLUDED SECURITY UPDATES DISCONTINUED) CONFIGURABLE FROM WINCC COMFORT V11

BOÎTIER DE RACCORDEMENT SIMATIC HMI ADVANCED POUR MOBILE PANELS; FIXATION MURALE; PROFINET ET PROFISAFE; RACCORDEMENT RELAIS DE SÉCURITÉ; PONTAGE DE CIRCUIT ARRÊT D'URGENCE; DÉTECTION DU POINT DE CONNEXION COMMUTATEUR INTÉGRÉ; CLIENT MRP; IRT

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; PROFIBUS DP 12; 2 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE; WINDOWS EMBEDDED STANDARD 2009 PREINSTALLED; W/O SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280 X 1024; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; CF CARD: 4 GBYTE

SMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 512 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C BUNDLE EN OPTION AVEC WINCC FLEXIBLE 2008/WINAC; ÉCRAN 15" TACTILE; 1024X 768; 4 USB (ARRIÈRE)+1 USB (FACE AVANT) FACE AVANT STANDARD CORE 2 DUO 1;2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GO -RAM; DDR3; 2E EMPLACEMENT CF NON ÉQUIPÉ CARTE CF: 8 GO WINDOWS EMBEDDED STANDARD 2009 PRÉINSTALLÉ WINCC FLEXIBLE RT 512 PT (AVEC ARCHIVES ET RECETTES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 128 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 16 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT WITH 8 GB CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE

SIMATIC 15 INCH TOUCH DISPLAY HMI.