SIMATIC ET200S LEUKHARDT

TB PEN FOR ET 200S TERMINAL BLOCK PEN FOR STARTER WITH CONNECTION FOR FEEDER CABLE AND LOAD FOR INSTALLATION ON THE LEFT

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI HIGH FEATURE 24V DC; 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4 F-DO PROFISAFE; DC 24V/2A; 30 MM WIDTH UP TO PL E (ISO13849); UP TO SIL 3 (IEC 61508); ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF

SIMATIC DP; 5 TERMINAL MODULES TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE 2 AI U HIGH FEATURE FOR ET 200S; 15 MM WIDE; CYCLE TIME PER MODULE: 0.5MS; +/-10V; 15 BI + SIGN; +/-5V;15BIT+SIGN; 1..5V; 15BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STANDARD 15 MM WIDE +/-10 V; 13 BIT + SIGN +/-5 V; 12 BIT+ SIGN; 1..5V; 12BIT; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; TERMINAL MODULE TM-P15C23-A0 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 INTERRUPTED

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 SI SERIAL INTERFACE ONE CHANNEL; 15MM WIDE RS232/422; 485 ASCII; 3964R

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

65 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS A WITHOUT FEEDER CONNECTION

ET 200S DISTRIBUTED I/O DIGITAL ELECTRONIC MODULE 4DO DC24V/0.5A HF (6ES7132-4BD00-0AB0)

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4/8 F-DI PROFISAFE; 24V DC; 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/2A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; COUPLEUR IM151-1 STANDARD POUR ET200S; VOLUME DONNEES 244 OCT. POUR ENTREES ET 244 OCT. P. SORTIES; MAX. 63 MODULES DE PERIPHERIE PROFIBUS DP V0 ET V1 LARGEUR STATION JUSQ. 2M; CONNEXION BUS PAR SUB-D 9 PTS.

EMBASE POUR ET 200S DS POUR DEPART-MOTEUR DIRECT; SANS BORNE D'ARRIVEE

SIMATIC DP; 1 ELECTR. MODULE FOR ET 200S; 8 DI DC 24V 15 MM WIDTH; 1 PIECE PER PACKAGING UNIT

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/0.5A; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI RTD 15 MM WIDE; 15BIT + SIGN PT100 STD; PT100 KL; NI100 STD; NI100 KL; 150 OHM; 300 OHM; 600 OHM; CYCLE TIME 110 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; 5 ELECTRONIC MODULES FOR ET 200S; 4 DO STANDARD 24 V DC/2 A; 15 MM WITH; 5 UNITS PER PACKING UNIT

F-RS1E-X POUR ET 200S DÉMARREUR-INVERSEUR FAILSAFE PLAGE DE RÉGLAGE 0;3...3 A COMMUTATION MÉCANIQUE CONTACTEURS ÉLECTRONIQUES EXTENSIBLE POUR MODULE DE COMMANDE DE FREIN; MODULE 2DI MODULE 2DI SIGNALISATION DU DISJONCTEUR PARAMÉTRABLE

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AO U; 15 MM WIDTH; +/-10 V; 13 BIT + SIGN; 1..5V; 12BIT; CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT)

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/0.5A; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT..

SIMATIC DP; SPARE PART TERMINATING MODULE FOR ET 200S

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

IMATIC DP; MODULE ÉLECTRONIQUE POUR ET 200S; 1 SSI 25 BITS/1MHZ 15MM MODULE POUR LE RACCORDEMENT DE CODEURS ABSOLUS AVEC INTERFACE SSI INTERFACE SÉRIE SYNCHRONE AVEC ENTRÉE TOR ET VALEUR DE COMPARAISON AVEC ISOCHRONISME

TB PEN FOR ET 200S TERMINAL BLOCK PEN FOR STARTER WITH CONNECTION FOR LOADS FOR MOUNTING IN THE CENTER

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO STANDARD DC 24V/0.5A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE 2 AI HIGH FEATURE U FOR ET 200S; 15 MM WIDE; +/-10V; 15 BI + SIGN; +/-5V;15BIT+SIGN; 1..5V; 15BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)

SIMATIC DP; IM151-8 PN/DP CPU FOR ET200S; 128 KB WORKING MEMORY; INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLER; W/O BATTERY MMC REQUIRED.

DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 0;70...1;00A AC-3; 0;25 KW/400V POUR MOD. BRAKE CONTROL

SIMATIC DP; MODULE ÉLECTRONIQUE POUR ET200S; 2 ENTRÉES ANALOGIQUES STANDARD I-4DMU 15MM +/-20MA; 13 BITS+SIGNE 4.. 20MA; 12 BITS POUR TRANSDUCTEUR DE MESURE 4 FILS TEMPS DE CYCLE 65 MS/VOIE AVEC LED SF (DÉFAUT GROUPÉ)

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4/8 F-DI PROFISAFE; 24V DC; 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF..

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D

MODULE ÉLECTRONIQUE POUR ET 200S; 8 SORTIES TOR 24V CC/0;5 A; LARGEUR DE CONSTRUCTION 15MM; COLISAGE = 1 UNITÉ

SIMATIC DP; POWER MODULE PM-E FOR ET200S; DC 24 - 48V; AC 24 - 230V; WITH DIAGNOSTICS AND BACKUP

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 STEP 5V/204KHZ FOR POSITIONING STEPPER MOTOR 15MM WIDE; SINGLE CHANNEL; +/-5V INTERF. FOR POWER SECTION

SIMATIC ET 200SP OPEN CONTROLLER; CPU 1515SP PC2 + HMI 512PT; 8 GO DE RAM; CFAST 128 GO AVEC WINDOWS 10 IOT ENTREPRISE 64BITS; S7-1500 SOFTWARE CONTROLLER CPU 1505SP

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 PULSE PULSED GENERATOR AND TIMER MODULE; 15 MM WIDE; 2 CHANNELS

DS1E-X POUR ET200S DÉMARREUR DIRECT HIGH FEATURE PLAGE DE RÉGLAGE 0;3...3 A COMMUTATION MÉCANIQUE CONTACTEURS ÉLECTRONIQUES AC-3; JUSQU’À 1;1 KW / 400 V EXTENSIBLE POUR MODULE DE COMMANDE DE FREIN MODULE 2DI DÉPART-MOTEUR ES SIGNALISATION DU DISJONCTEUR PARAMÉTRABLE COMPATIBLE DPV 1 COMPATIBLE PROFIENERGY SUR PN

EMBASE POUR ET 200S DS POUR DEPART-MOTEUR DIRECT; AVEC BORNE D'ARRIVEE

SIMATIC DP; INTERFACE MODULE IM151-3 PN HF FOR ET 200S; TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 PERIPHERAL MODULES UP TO 2M WIDTH CONNECTABLE; 2 X BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE

FREQUENCY CONVERTER FOR ET 200S CONVERTER POWER MODULE IPM25 MODULE WIDTH 65 MM 3AC380-480V 10/-15% 47-63HZ POWER 0.75 KW / 1.0 HP OVERLOAD 150% 60S; 200% 3S POWER RECOVERY EXPANDABLE WITH BRAKE CONTROL MODULE OPTION: EXT. EMC-FILTER (CL. A)

SIMATIC DP; TERMINAL MODULE TM-P15C22-01 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2 X 2 TERMINAL CONNECTIONS W/O TERMINAL LEAD TO AUX1; AUX1 IN LINE

"DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 7;0...10A AC-3; 4;0 KW/400V POUR MOD. BRAKE CONTROL".

SIMATIC DP; ELECTRONICS MODULE FOR ET 200S; 4 AI TC; +/-80 MV; 15 MM WIDTH; 15 BIT+SIGN WITH SF LED (GROUP FAULT)

DS1-X FOR ET 200S ELECTROMECHANICS LINE STARTER EXPANDABLE ADJUSTABLE RANGE 1.4...2.0A AC-3; 0.75 KW/400V FOR BRAKE CONTROL MODULE

SIMATIC DP; INTERFACE MODULE IM151-1 BASIC FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; MAX. OF 12 POWER; ELECTR. OR MOTOR STARTER MODULES (NO F-MODULES) CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D CONN. INCL. TERMINATING MODULE.