LISTA DE PRODUCTOS POR FABRICANTE SIEMENS

SINUMERIK 840C/840CE PLATINE CENTRALE DE SERVICE AVEC PILE SAUVEGARDE CENTRALE ET CONNEXION DE 2 MANIVELLES ET 2 PALPEURS

INUMERIK 840C/840CE MMC CPU 486DX4/100 MHZ WITH 32 MB RAM AND FLASHDRIVE

SINAMICS G120C RATED POWER 0;55KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI; 2DO;1AI;1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: USS/ MODBUS RTU PROTECTION: IP20.

MICROMASTER MM37/3 UNFILTERED 3AC 380-500V +/-10% 50/60HZ CONSTANT TORQUE: 0.37 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

SITOP POWER 7; SPECIAL LINE STABILIZED AS-I POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 30 V DC/7 A S7-300 DESIGN

ALIMENTATION SITOP POWER 20 24VDC 20 AMP

TERMINAL DE BUS 12 M POUR PROFIBUS; VITESSE DE TRANSMISSION: 9;6 KBITS/S A 12 MBIT/S; CABLE DE LIAISON 1;5 M

SIMOTICS S SYNCHRONOUS SERVOMOTOR 1FT6 13NM; 100K; 3000 RPM NATURALLY COOLED IM B5 (IM V1; IM V3) FOR POWER AND SIGNAL CONNECTOR CONNECTOR OUTLET DIRECTION AXIAL DE INCREMENTAL ENCODER SIN/COS 1 VSS 2048 S/R (ENCODER I-2048) WITH FEATHER KEY; CIRCULAR RUNOUT TOLERANCE N WITH HOLDING BRAKE VIBRATION SEVERITY GRADE N LABYRINTH SEAL (IP64)

SIMATIC S5; S5-95U COMPACT UNIT W. PROFIBUS-DP MASTER INTERFACE INCLUDING MEMORY MODULE

SIMATIC S5 IP 243 ANALOG MODULE FULL CONFIGURATION

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-400; IM460-1 TRANSMITTER INTERFACE MODULE; FOR CENTRALIZED CONNECTION WITH PS TRANSMISSION W/O K BUS

QUADLOG MODULE BUS CONTINUATION (BCM)

QLMBXNAN QUADLOG MODULAR EXPANDER BOARD REF 16180-71

MMC-SICOMP IM IO5 INPUT- /OUTPUT-MODULE FOR FM 486 WITH 3 PULSE COUNTERS; 16 BINARY INPUTS; 8 BINARY OUTPUTS; 4 ANALOG INPUTS AND 8 ANALOG OUTPUTS; W. MOUNTING MATERIAL

SIEMENS G22910-E0130-L MODULE

SIMATIC PANEL 677B/C COMPLETE SPARE FRONT; 15" TOUCH ROHS-COMPATIBLE FRONTUNIT FOR UNITS WITH PRODUCTIONDATE FROM 06/2010

SIMATIC S7-300; CP341 COMMUNICATION PROCESSOR WITH 20MA INTERFACE (TTY) INCL. CONFIG. PACKAGE ON CD

SIMATIC IPC847C (RACK PC; 19"; 4HU); INTERFACES: 2 X GBIT LAN(RJ45) 1X DVI-I; AUDIO; 2X COM; 1X LPT; 2X PS/2; 4X USB 2.0 ON REAR; 2X USB 2.0 ON THE FRONT; TEMP. AND FAN MONITORING; WATCHDOG; CARD RETAINER CORE I5-520E (2C/4T; 2.4 GHZ; 3 MB CACHE; TB; VT-X; VT-D; EM64-T; AMT); MAINBOARD WITHOUT FIELDBUS RAID1 500 GB (2X 500 GB HDD SATA; IN REMOVABLE FRAME; HOT SWAP; FRONT-SIDE 2 GB DDR3 SD-RAM (1X 2 GB); SINGLE CHANNEL DVD-ROM; BUS MODULE; 8 SLOTS: 7XPCI; 1X PCIE X16; WITHOUT HARDWARE EXPANSIONS WINXP PROFESSIONAL; 32 BIT; MUI (D;E;F;S;I); SP3 WITHOUT SOFTWARE 110/230V INDUSTRIAL POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE

MICROMASTER MM220/2 UNFILTERED 1AC/3AC 208-240V +/-10% 50/60HZ CONSTANT TORQUE: 2.2 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 215 X 185 X 195 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

SIMATIC S7-300;INTERFACE MODULE IM 360 IN CENTRAL RACK FOR CONNECTING MAX. 3 EXPANSION RACKS; WITH K-BUS

REAR PANEL WIRING

SINAMICS G120 POWER MODULE PM240 WITH BUILT IN CL. A FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 11KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 15KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO +40 DEG C 334 X 189 X 185 (HXWXD); FSC PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

BOITE DE CONTRÔLE CHAUDIÈRE 220-240 V 50 A 60HZ 3.5VA

12" KEY FRONT SIMATIC PANEL FOR PC 677/877.

SINAMICS S120 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE-EXTENSION 1 INCLUDING CERTIFICATE OF LICENCE V4.3 SP2

SIMOTICS S SYNCHRONOUS SERVOMOTOR 1FT6 13NM; 100K; 3000 RPM NATURALLY COOLED; IP65 IM B5 (IM V1; IM V3) INCREMENTAL ENCODER SIN/COS 1 VSS 2048 S/R (ENCODER I-2048) FOR POWER/SIGNAL CONNECTORS: OUTLET DIRECTION TRANSVERSE RIGHT WITHOUT HOLDING BRAKE

SIMOTICS S SYNCHRONOUS MOTOR 1FT7; M0=65NM (100K) NN=2000RPM; PN=11.70KW FORCED VENTILATION FRAME SIZE IMB 5 (IM V1; IM V3) CONVENTIONAL FLANGE (1FT6/1FK7 COMPATIBLE) POWER CONNECTOR ROTATABLE ABSOLUTE ENCODER 24 BITS + 12 BIT MULTITURN WITH DRIVE-CLIQ INTERFACE (ENCODER AM24DQI) SHAFT WITH FITTED KEY; WITH HOLDING BRAKE; ACC. TOLERANCE N VIBRATION SEVERITY GRADE A; DEGREE OF PROTECTION IP 65

SIMOTICS S SYNCHRONOUS SERVOMOTOR 1FT6 5.0NM; 100K; 3000 RPM NATURALLY COOLED; IP65 IM B5 (IM V1; IM V3) ABSOLUTE ENCODER ENDAT 2048 S/R (ENCODER A-2048) FOR POWER/SIGNAL CONNECTORS: OUTLET DIRECTION AXIAL DE WITHOUT HOLDING BRAKE

SIEMENS FCP1004-E - POWER SUPPLY 3.5 A REF A6E60500054 FOR EXTINGUISHING CONTROL UNIT XC1001-A

SIEMENS XCM1002 MAIN BOARD FOR XC10

SINAMICS G120C RATED POWER 7;5KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI; 2DO;1AI;1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: USS/ MODBUS RTU PROTECTION: IP20/ UL OPEN TYPE SIZE: FSB 196X100X203(HXWXD) EXTERNAL 24V

SIMOTICS M COMPACT INDUCTION MOTOR 22KW; 1500RPM; 140.1NM VC: 25KW; 1750RPM; 136.4NM 57A; VC: 56A; WITHOUT BRAKE 400V 3AC 50HZ; WITH FAN MOTOR ENCODER RESOLVER TERMINAL BOX ON TOP; CABLE ON RIGHT TYPE OF CONSTRUCTION IM B5 (IM V1; IM V3) VIBRATION SEVERITY GRADE R; SHAFT AND FLANGE ACCURACY R FITTED KEY + HALF-KEY BALANCING DIRECTION OF AIR FLOW FROM DE TO NDE IP55; FAN IP54 UNPAINTED

WITHDRAWABLE CIRCUIT BREAKER WITHOUT GUIDE FRAME 4-POLE; SIZE II; IEC IN=800A TO 690V; AC50/60HZ ICU=66KA AT 500V REAR CONNECTION HORIZONTAL OVERCURRENT TRIP ETU 45 LSIN PROT ADJUST. 0.4-1 IN WITH DISPLAY AND CUBICLE BUS COMM./MEASURING FUNC./EARTH FLT./ZSS OPTION MOT./MAN. OPER.MECHAN. W.STOR. DRIVE MOTOR AC 50/60HZ 208-240V BZW DC 220-250V REQU. AC 50/60HZ 230V; DC 220V WITHOUT 1ST SHUNT TRIP WITH 2ND AUX. RELEASE "R"; F3 UNDERVOLTAGE; NON-DEL. AC 208-240V; DC 220-250V 2NO+2NC

SINAMICS G120C RATED POWER: 5.5KW WITH 150% OVERLOAD FOR 3 SEC. 380-480V3AC+10/-20% 47-63HZ UNFILTERED I/O INTERFACE: 6DI; 2 DO; 1 AI; 1 AO SAFE-TORQUE-OFF INTEGRATED FIELDBUS INTEGRATED: PROFIBUS DP DEGREE OF PROTECTION IP20/UL OPEN TYPE VARIABLE: FSB 196X 100X 203 (HXWXD)

COMPLETE OPERATING UNIT (SUPPORT BASE‚ KEYPAD‚ PMI MAIN BOARD‚ CPU MODULE) AND 24 LED DISPLAY GROUPS‚ WITH ONE RED AND ONE YELLOW LED EACH WITHOUT ACCESSORIES.

SIMATIC IPC277D (NANOPANEL PC) 7" TOUCH TFT; 2X 10/100/1000 MBPS ETHERNET RJ45; 3X USB V2.0 (HIGH CURRENT); 1X SERIAL (COM 1); COMPACTFLASH SLOT; 24 V DC POWER SUPPLY ATOM E640 (1.0 GHZ); 1 GB RAM STANDARD FRONT 8 GB SIMATIC PC COMPACTFLASH WES 2009 SP3 (CF 2 GB OR MORE/SSD) WITHOUT SIMATIC SOFTWARE

SIEMENS 6DM1001-1LA00-1 POWER SUPPLY BOARD

CONTACTOR; AC-3 30 KW/400 V; DC 24 V; 3-POLE; SIZE S3; SCREW CONNECTION

SIMOTICS S SYNCHRONOUS SERVO MOTOR 1FK7 COMPACT 6.0NM; 100K; 4500RPM 1.74KW; NATURALLY COOLED IM B5 (IM V1; IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270° ABSOLUTE ENCODER 2048 P/REV (ENCODER A-2048) WITH DRIVE-CLIQ INTERFACE; PERFORMANCE REDUCTION BY 10% DUE TO ABSOLUTE ENCODER; PLAIN SHAFT; TOLERANCE N; WITH HOLDING BRAKE DEGREE OF PROTECTION IP64

CÂBLE DE PUISSANCE AU MÈTRE TYPE: 6FX7008-1BC41 4X 6+4X 0;5 C POUR MOTEURS LINÉAIRES CHENILLABLE UL/CSA DESINA MOTION CONNECT 700 FORME DE LIVRAISON: ANNEAU DMAX = 18;3MM; LONGUEUR (M)= 0 + 0 + 8 + 0

POWER CABLE PRE-ASSEMBLED TYPE: 6FX8002-5DS31 4X 2.5+(2X1.5) C C CONNECTOR FULL THREAD SZ. 1.5 FOR SINAMICS S120 MOTOR MODULE BOOKSIZE MOTION-CONNECT 800PLUS TRAILABLE; UL/CSA; DESINA DMAX=13.9 MM LENGTH (M)= 0 + 0 + 6 + 0.

CIRCUIT BREAKER VL160X N STANDARD BREAKING CAPACITY ICU=55KA; 415V AC 4-POLE; LINE PROTECTION TRIP UNIT TM; LI IN=20A; RATED CURRENT IR=20A; OVERLOAD PROTECTION II=300A; SHORT-CIRCUIT PROT. N UNPROTECTED WITHOUT AUXILIARY RELEASE WITHOUT AUXILIARY/ALARM SWITCH

CIRCUIT BREAKER VL400N STANDARD BREAKING CAPACITY ICU=55KA; 415V AC 3-POLE; LINE PROTECTION TRIP UNIT TM; LI IN=400A; RATED CURRENT IR=320...400A; OVERLOAD PROTECTION; II=2000...4000A; SHORT-CIRCUIT PROTECTION WITHOUT AUXILIARY RELEASE WITHOUT AUXILIARY/ALARM SWITCH

SIMATIC HMI IPC 477C MOTHERBOARD A5E02431059 CORE 2 SOLO 1.2 GHZ; PROFINET (IE);2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT WITH 2 GB CF CARD

SIMOTICS L SECONDARY SECTION FOR LINEAR MOTOR 1FN3... SIZE 300; COMPONENT 3-PHASE SYNCHRONOUS MOTOR; LENGTH 184MM

SCALANCE X005; COMMUTATEUR IE ENTRY LEVEL NON MANAGE 5 X 10/100MBIT/S RJ45 PORTS; DIAGNOSTIC LED; IP30; ALIMENTATION 24 V CC; COLERETTE SUPPORT CONFORME A PROFINET; MANUEL DISPONIBLE COMME TELECHARGEMENT.

MULTIRANGER 100/200 ULTRASONIC LEVEL CONTROLLER: CONTINUOUS; NON-CONTACT; 15 M (50 FT) RANGE. MONITORS LEVEL; VOLUME; AND OPEN CHANNEL FLOW IN LIQUIDS; SLURRIES; AND SOLIDS. VERSIONS: MULTIRANGER 100; LEVEL MEASUREMENT MOUNTING; ENCLOSURE DESIGN: WALL MOUNT; 4 ENTRIES; 4 M20 CABLE GLANDS INCLUDED INPUT VOLTAGE: 100 TO 230 VAC NUMBER OF MEASUREMENT POINTS: SINGLE POINT VERSION DATA COMMUNICATIONS (SMARTLINX): WITHOUT MODULE OUTPUT RELAYS: 6 RELAYS (4 FORM A; 2 FORM C); 250 V AC

SIMATIC HMI PC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH NAMUR; POWER SUPPLY CABLE EUROPE CORE I7-610E (2C/4T; 2.53GHZ; TB; HT; VT; 4 MB CACHE); PROFIBUS/MPI (CP 5611-A2-COMPATIBLE); 2 MB BUFFERED SRAM 4 GB DDR3 1066 DIMM; ECC; 250 GB HDD SATA DVD+-R+-RW; 1X PCI; 1X PCIE (X16) FREE WINDOWS 7 ULTIMATE 64 BIT SP1; MUI (DE; EN; FR; ES; IT) WITHOUT EXPANSION (SOFTWARE)

MICROMASTER 420 SANS FILTRE TRIPH. 380-480 V +10/-10 % 47-63 HZ COUPLE CONSTANT 4 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 4 KW 202 X 149 X 172 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMODRIVE 611 SURGE ARRESTER FOR POWER SUPPLY 10 KW; FOR INTERNAL AND EXTERNAL COOLING

LOGO! 24RC;MODULE LOGIQUE;ECRAN ALIM/E/S: 24V UC/24V UC/RELAIS; 8 E/4 S TOR; MEM. 200 BLOCS EXTENSION PAR MODULES 24V CA/CC

SIRIUS SAFETY RELAY WITH RELAY ENABLING CIRCUITS (EC) 24 V DC; 45 MM OVERALL WIDTH SCREW TERMINAL EC INSTANTANEOUS: 2 NO EC DELAYED: 2NO; 0.5...30 S SC: 1NC MONITORED START BASIC DEVICE MAXIMUM ACHIEVED SIL: 3/2; PL: E/D.

SIMODRIVE 611 POWER MODULE; 1 AXIS; 160 A; INTERNAL COOLING; MOTOR RATED CURRENTS: 1FT5 = 80 A; 1FT6 = 56 A; 1PH = 60 A; INDUCTION MOTOR = 60 A

SIMATIC S5; CPU 944 F. S5-115U PLC RAM 96 KBYTES WITH 2 PROGRAMMER PORTS

SIMATIC S5; S5-95U COMPACT UNIT W. PROFIBUS-DP SLAVE INTERFACE

SIMATIC S5; IP240 COUNTER AND POSITION DECODER MODULE

SIMATIC S5 788 SIMULATION MODULE F. S5-90U/95U/100U; ET100U/200U FOR 8 INPUT OR 8 OUTPUT SIGNALS

SIMODRIVE 611-A/611-D INFEED MODULE; 10/25 KW UNREGULATED

SIMATIC S5; PLUG-IN CABLE 734-1 FROM AG 15-POLE TO PC 25-POLE 3.2 M.

SIMATIC S5; ADAPT. DE MESURE POUR ENTREES ANALOGIQUES +-10V

SIMATIC NET OLM F INDUSTRIAL ETHERNET OPTICAL LINK

SIMOVERT MASTERDRIVES POWER SUPPLY UNIT PSU1 FOR UNITS OF DESIGN E TO H 3-PH. 380-460 AC. 660-690 V; 50/60 HZ AND 510-620V DC; 890-930V DC

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 8 DI 24 V DC; SINK/SOURCE; 8 DO RELAY; 2A/POINT

MICROMASTER VECTOR MMV75/3 UNFILTERED 3AC 380-500V +/-10% 50/60HZ CONSTANT TORQUE: 0.75 KW OVERLOAD 150% 60SEC; 200% 3SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

SIMODRIVE 611 INFEED/REGEN.FEEDBACK MODULE 120/156 KW; CLOSED-LOOP CONTROL INTERNAL COOLING.

PUPITRE OPERATEUR OP17/PP ECRAN LCD RETROECLAIRE PAR LED 4X20/8X40 LIGNESXCARACT. SIMATIC S5; 505; PILOTES NATIFS SANS HOMOLOGATION UL/CSA

INVERTER GATING MODULE IGD7 FOR UNITS 3 AC 380-460V; 50/60HZ A. DC 510-620V; 510A

SIMATIC DP; DISTRIBUTED I/O DP/DP COUPLER COUPLING MODULE FOR CONNECTING TWO PROFIBUS DP NETWORKS

SITOP POWER 20; BASIC LINE ALIMENTATION STABILISEE ENTREE: 3X 480 V CA (360..550V) SORTIE: 24 V CC/20 A

SIMATIC S7-300; COUNTER MODULE FM 350-1 FOR S7-300; COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS ISOCHRON MODE; MEASUREMENT MODE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-400; SM 432 ANALOG OUTPUT MODULE OPTIC. ISOLATED; 8 AO; 13 BIT RESOLUTION; U/I

SIMATIC S5; CPU 948R CENTRAL PROCESSING UNIT FOR S5-155H; 1600 KB RAM

SIMATIC PG; ADAPTER FOR S5 EPROM PROGRAMMING IN THE FIELD PG AND POWER PG

SIMATIC NET; SIBUKO KIT 2 POUR INDUSTRIAL ETHERNET COMPRENANT : RACCORD DE BUS A CONNECTEUR N; COUPLEUR DE BUS; KIT DE FIXATION; PLATINE MONTAGE; INSTRUCTIONS DE MONTAGE (ALLEMAND; ANGLAIS; FRANCAIS)

SIMATIC S5 470 ANALOG OUTPUT MODULE FLOATING F. S5-90U/-95U/-100U; ET 100U; ET 200U; 2 OUTPUTS +-10V.

SIMATIC S5; DIGITAL OUTPUT 452 ISOLATED FOR S5-90U/-95U/-100U; ET 100U; ET 200U RELAIS CONTACT OUTPUTS DC 30V/AC 230 V.

SIMATIC S5; COUPLEUR IM 315 POUR LE RACCORDEMENT DE 1 RANGEE D'EXTENSION DU S5-100U/ET 100U/ET 200U

SIMATIC S7-300; CPU 314 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 48 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

COMMUNICATIONS PROCESSOR CP 443-1 FOR CONNECTION OF SIMATIC S7-400 TO INDUSTRIAL ETHERNET VIA ISO/TCP/IP AND UDP; S7 COMMUNICATION; FETCH/WRITE; DIAGNOSTICS EXPANSIONS; SEND/RECEIVE; WITH AND WITHOUT RFC1006; MULTICAST; NTP; INITIALIZATION VIA LAN; ACCESS PROTECTION VIA IP ACCESS LIST 10/100 MBIT

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE; INTEGRATED 24 V DC POWER SUPPLY 32 KBYTE WORKING MEMORY; MICRO MEMORY CARD NECESSARY

SIMATIC S7-400; IM461-3 RECEIVER INTERFACE MODULE FOR DISTRIBUTED CONNECTION UP TO 102 M; WITH K BUS

SIMATIC S7; ANALOG INPUT SM 331; OPTICALLY ISOLATATED; 4 AI; 0/4 - 20MA; 1 X 20 PIN; F. SIGNALS F. HAZARDOUS AREAS; CAPABLE OF DIAGNOST.;PTB-TESTED

SIMATIC DP; EXPANSION MODULE EM 142 FOR ET 200X; 8 DO DC 24 V/1.2 A; 5-PIN M12; PROTECTION IP 66/67; FOR ALL BASIC MODULES

SIMATIC S7-300; CPU 312 IFM CENTRAL PROCESSING UNIT WITH 10 DI/6 DO; 1 X 20 PIN.; COUNTER; FREQUENCY MEASUREMENT INTEGRATED POWER SUPPLY 24V DC 6 KBYTES WORKING MEMORY

MODULE PUISSANCE PMD P. ET 200S MODULE DE PUISSANCE POUR DEPARTS-MOTEURS

SINAMICS V20 1AC200-240V -10/+10% 47-63HZ RATED POWER 0;12KW WITH 150% OVERLOAD FOR 60SEC INTEGRATED FILTER C2 I/O-INTERFACE: 4DI; 2DO;2AI;1AO FIELDBUS: USS/ MODBUS RTU WITH INBUILT BOP PROTECTION: IP20/ UL OPEN TYPE SIZE:FSA 90X150X146(HXWXD)

SIMOREG DC MASTER CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 104A CONTROLLABLE FIELD RECTIFIER D420/125 MREQ-GEG6V62 OUTPUT: DC 420V; 125A OUTPUT US-RATING:DC420V; 107A FIELD-INP. 400V;-OUTP. 325V;10A

SIMATIC S7-400; CP 441-2 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 2 CHANNELS

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI RTD 15 MM WIDE; 15BIT + SIGN PT100 STD; PT100 KL; NI100 STD; NI100 KL; 150 OHM; 300 OHM; 600 OHM; CYCLE TIME 110 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC S7-400; PS 407 POWER SUPPLY; 10A; 120/230V UC; 5V/10A DC

SIMATIC DP; ELECT. SUBMODULE FOR ET200ISP; 4 AI; TC; FOR CONNECTION OF THERMOELEMENS (VOLTAGE MEASUREMENT)

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED 16 DO; 120/230V AC; 1 A; 1 X 20 PIN

COMMUNICATIONS PROCESSOR CP 5613 A2; PCI CARD TO CONNECTION TO PROFIBUS; INCL. DP-BASE SOFTWARE; CONFIGURING TOOL: DP-RAM INTERFACE FOR DP MASTER INCL. PG AND FDL PROTOCOL.

SIMATIC HMI MEMORY CARD 128 MB MULTI MEDIA CARD FOR OP 77B; TP/OP 177B; TP/OP 277; C7-635; MP 177; MP 277; MP 377; MOBILE PANEL 177; MOBILE PANEL 277 AND ALL OTHER HMI PANELS WITH MM CARD SLOT.

SINUMERIK OPERATEUR PANEL OP 010 10.4"

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-21X CPU ONLY; 8 DI DC 24 V/8 DO DC 24 V

SINUMERIK HARD DISK WITH MOUNTING PLATE AND DAMPER; FOR PCU 50.3 6FC5210-0DF31-2AA0 6FC5210-0DF33-2AA0 6FC5220-0AA31-2AA0 6FC5220-0AA33-2AA0 6FC5210-0DF31-2AB0

SINAMICS S120 CONVERTISSEUR POWER MODULE PM340 ENTREE: 380-480V CA 3PH;50/60HZ SORTIE: 1;7A CA 3PH (0;55KW) FORME BLOCKSIZE TAILLE DE CONSTRUCTION FSA REFROIDISSEMENT A AIR INTERNE

SINAMICS G120 MODULES DE PUISSANCE PM240 NON FILTRE A HACHEUR DE FREINAGE INTEGRE 3PH 380-480 V +10/-10% 47-63 HZ PUISS. SURCHARGE ELEVEE:45 KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE:55 KW A 150% 3S;110% 57S;100