Power supplies

SINAMICS G120 POWER MODULE PM230 NON FILTRE DEGRE DE PROT. IP20 3PH 380-480V +10/-10% 47-63HZ PUISS. LOW OVERLOAD: 30KW AVEC 110% 60S;100% 240S TEMP. AMB. 0 A +40 DEG. C (LO) 419 X 275 X 204 (HXLXP); FSD SANS CONTROL UNIT NI UNITE DE PROGRAMMATION APPROUVE POUR CU240B/E-2 ET CU230P-2 PARTIR DE LA VERSION DU MICROLOGICIEL V 4.4 REMARQUE: PM230 N'AIDE PAS SAFETY

SINAMICS G120D POWER MODULE PM250D WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0;75KW FOR 200% 3S;150% 60S;100% 300S AMBIENT TEMP -10 TO 55 DEG C 210 X 450 X 110 (HXWXD); FSA PROTECTION IP65 WITHOUT CONTROL UNIT

KDV SUPPLY MODULE FOR AC DRIVES SERIES: 1; VERSION: 3; RATED CURRENT: 100A; AC 200V; DC 300V

RÉGULATEUR DE TENSION POUR ALTERNATEUR À EXCITATION

TRANSFORMATEUR; SÉCURITÉ / ISOLEMENT; 160VA; 230 / 400VCA; 230V;

MODULE REDRESSEUR 1800W 24V 60A ALIMENTATION MONO 230V 50/60HZ CONFIGURABLE EN MODE ALIMENTATION OU CHARGEUR BATTERIE PB OU CDNI LIVRÉ EN MODE CHARGEUR BATTERIE PBSE

POWER SUPPLY; AC-DC; 24V; 40A; 85-132V IN; ENCLOSED; LINEAR; INDUSTRIAL; 960W; AD SERIES

ALSPA GD4000 & SIGMA SWITCHED MODE POWER SUPPLY

46801

MITSUBISHI MDS-B-CV-185 ALIMENTATION MDS 18.5KW

INDRAMAT AC SERVO TVM2.4-050-220/300-W1/220/380

MITSUBISHI MDS-B-CV-185 ALIMENTATION MDS 7.5KW

POWER SUPPLY MDLL 30 KW MDLL3030N00AN01

SITOP PSU8200 24 V/40 A ALIMENTATION STABILISÉE ENTRÉE : 3 CA 400-500 V SORTIE : 24 V CC/40 A

ALIMENTATION À COMMUTATION 10W 85-264VAC 15VDC 670MA

ALIMENTATION REDRESSEE FILTREE 24V 240W 10A

87422A POWER SUPPLY 70 W +15 V AT 3.3 A; -15 V AT 50 MA +12 V AT 2.0 A; -12 V AT 200 MA

CONVERTISSEUR C.A./C.C. 150W MONOSORTIE; TENSION : 12V CC; COURANT : 12.5A

CARTE CONVERTISSEUR NETSTAL

A20B-2101-0392 SERVO POWER SUPPLY BOARD PCB - ALPHA I PSM FOR 6110 AND 6120 HV SERIES

AUTO TRANSFORMATEUR 3 PHAES 415V 16;3KVA 20A

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 3KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 4KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 291 X 100 X 165 (HXLXP); FSB INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

ALIMENTATION FERMÉE AC/DC (PSU); ITE; 1 SORTIE(S); 300 W; 5 V; 60 A

ALIMENTATION ENTRÉE 110-240VAC SORTIE 30VDC 6A

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR FORME COMPACTE; IP20 510-650 V CC; 10;2 A PUISSANCE DE TYPE: 4

SINAMICS/ SIMOVERT MASTERDRIVES BRAKING RESISTOR 510-620V DC 170 KW; 2.35 OHM

SINAMICS ACTIVE LINE MODULE 380-480V 3AC; 50/60 HZ; 840 A OUTPUT: 510-720 V DC RATED POWER: 500KW BUILT-IN UNIT IP00 DESIGN CIM INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE

SWITCH MODE DC POWER SUPPLIES LAB/SM135 1000W; 0-35V; 0-35A

The equipment with type Alimentation is manufactured by GECMA and commercialized under the reference CPS-1DC.The equipment alternative reference is : CPS1DC. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by PARKER and commercialized under the reference PM1200B. This product comes from the DIGIPLAN range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by ABB and commercialized under the reference 3HAB8101-402A.The equipment alternative reference is : 3HAB8101402A. This product comes from the DSQC346 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MITSUBISHI and commercialized under the reference MDS-D-CV-110.The equipment alternative reference is : MDSDCV110. This product comes from the MDS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by XP POWER and commercialized under the reference F4JCA5A5A6. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MICHAEL RIEDEL and commercialized under the reference RDCUSV40S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by DATALOGIC and commercialized under the reference BC9030-433.The equipment alternative reference is : BC9030433. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by PHILIPS and commercialized under the reference PE2169/00.The equipment alternative reference is : PE216900. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6SL3225-0BH27-5UA1.The equipment alternative reference is : 6SL32250BH275UA1. This product comes from the SINAMICS G120 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by ELETTRONICA and commercialized under the reference ASTL705/715-24/400-500.The equipment alternative reference is : ASTL70571524400500. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by HEIDENHAIN and commercialized under the reference IDNR 337 038-03.The equipment alternative reference is : IDNR33703803. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SCHAFFNER and commercialized under the reference FN351-50-33.The equipment alternative reference is : FN3515033. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by TDK-LAMBDA and commercialized under the reference SAQ800Q/P.The equipment alternative reference is : SAQ800QP. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by NUM and commercialized under the reference MDLQ3001N00. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by LAMBDA and commercialized under the reference HWS15024. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by _GENERIQUE and commercialized under the reference SPS705. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by PHOENIX CONTACT and commercialized under the reference QUINT-DOIDE40.The equipment alternative reference is : QUINTDOIDE40. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by FANUC and commercialized under the reference A06B-6200-H037.The equipment alternative reference is : A06B6200H037. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SEW EURODRIVE and commercialized under the reference DFS21B/UOH11B.The equipment alternative reference is : DFS21BUOH11B. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by IDEC and commercialized under the reference PS3E-F24.The equipment alternative reference is : PS3EF24. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by XP POWER and commercialized under the reference SHP650PS24-TF.The equipment alternative reference is : SHP650PS24TF. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MITSUBISHI and commercialized under the reference MDS-CH-CV-260.The equipment alternative reference is : MDSCHCV260. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by CARLO GAVAZZI and commercialized under the reference RBS2332. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6SL3210-1NE21-8UG1.The equipment alternative reference is : 6SL32101NE218UG1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by LAMBDA and commercialized under the reference JWS240P-24.The equipment alternative reference is : JWS240P24. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

VERO TRIVOLT PK 55 POWER SUPPLY 5V 5A +/-12-15V

SINAMICS S120 ACTIVE INTERFACE MODULE FOR ACTIVE LINE MODULE 380/500KW 3AC 380-480V; 50/60HZ; 840A RATED POWER: 500KW CHASSIS UNIT IP00 INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE WITH KTY

6SL3300-7TE35-0AB0 UNIT AIM 2 (F1) GG 380-480V/ 490A AVEC KTY

SINAMICS ACTIVE INTERFACE MODULE FOR 3AC 380-480V; 50/60HZ 132 KW AND 160 KW ACTIVE LINE MODULE INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE

ONDULEUR SUNEZY 600E - 3 MPPT - 5400 WP - VDE

MOTOR CABLE SH TO MC-4 2;5MM2 M40 UL

SINAMICS ACTIVE LINE MODULE INPUT: 3AC 380-480 V; 50/60HZ OUTPUT: 600 V DC; 27 A; 16 KW INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER AND DRIVE-CLIQ CABLE

SINAMICS ACTIVE LINE MODULE INPUT: 3 AC 380-480 V; 50/60HZ OUTPUT: 600 V DC; 133 A; 80 KW INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER AND DRIVE-CLIQ CABLE

TRANSFORMATOR MIT GETRENNTER WICKLUNG 3 AC 380/165 V NENNLEISTUNG 2;5 KVA

3-PH MAINS CHOKE F. U-CONVERTER 200A; FOR 480V 60HZ/400V 50HZ VOLTAGE DROP 5;31V AT 60HZ

SINGLE-PHASE TRANSFORMER CONTROL TRANSFORMER VDE/CSA/UL 0.100KVA PRIMARY VOLTAGE 400V +-5% SECONDARY VOLTAGE 230V IP00; WITH SNAP-ON MOUNTING ONT 35MM STANDARD MOUNTING RAIL

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 30KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 37KW FOR 150% 3S;110% 57S;100% 240S

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 90KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO 50 DEG C OUTPUT LIGHT OVERLOAD: 110KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO 40 DEG C 634 X 350 X 316 (HXWXD); FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

SIMODRIVE 611-A/D INFEED/REGEN.FEEDBACK MODULE; 36/47 KW; REGULATED

SIMODRIVE 611A/D INFEED MODULE; 28/50 KW; UNREGULATED; FOR INTERNAL COOL.

SIMODRIVE 611 INFEED/REGEN.FEEDBACK MODULE; 120/156 KW; REGULATED; INTERNAL COOLING

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):0;06 /0;23; UPRI(V):400 /-10% TOLERANZ; USEC(V):24 NO LOAD VOLTAGE; ISEC(A):2;5; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:50 /B; IP00; TYPE OF TERMINALS:CAGE-CLAMP; INSTALLATION:SCREWS/MOUNTING RAILS; EN 61558-2-2; -2-6

SINAMICS G120D POWER MODULE PM250D WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 4;0KW FOR 200% 3S;150% 60S;100% 300S AMBIENT TEMP -10 TO 55 DEG C 210 X 450 X 220 (HXWXD); FSC PROTECTION IP65 WITHOUT CONTROL UNIT

SINUMERIK 880 MULTIPORT RAM W/O CLOCK; W. BATTERY BACKED RAM-MODULE

1321 POWER COMPONENT 600 A LINE REACTOR

TRANSFORMATEUR DE SEPARATION; PHASES:3; PN(KVA):15;7; UPRI(V):440-415-400; USEC(V):400; ISEC(A):22;7; F(HZ):50...60; COUPLAGE / ECRANYYN0 /0; TA/ISOKL:40 /H; IP00; CONNECTIQUE : RACCORDEMENT A VIS; MONTAGE:VIS; EN 61558-2-4 >UL/CSA-RECOGNIZED

POWER SUPPLY

ALPHA POWER SUPPLY MODULE

MGV STROMVERSORGUNGEN PH1003-2840 KUKA KRC2 POWER SUPPLY 40 AMP 00-109-802.

HDS SERVO DRIVE CONTROLLER LINE:04; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 200A; OTHER VERSIONS: NONE; CONTROLLER FAMILY: DIAX04; SERCOS INTERFACE; FUNCTION ID CODE: 12; VERSION OF FUNCTION ID: 01; FIRMWARE: STANDARD

QUINT-PS-3X400-500AC/24DC/30 ALIMENTATION 24V C.C. 30A; 400V C.A.; 720W

15154127-200 E-MO-111 CÂBLE D'ALIMENTATION SH 20 M

DISJONCTEUR COMPACT NS1000N MICROLOGIC 2.0 1000 A 4P 4D

REGULATEUR DE TENSION MODELE BIVOLT PK110 TYPE 136-101-38J ENTREE 220VAC SORTIE 5V/10A (+12V-12V-15V)/2A PUISSANCE 160W VERO

SIMODRIVE 611 INFEED/REGENERATIVE FEEDBACK MODULE 16/21 KW; STABILIZED; WITH INTERNAL COOLING; MAINS CONTACTOR WITH BREAK CONTACT

FIDIA POWER 300 XP300-300M

SITOP POWER 4 ALIMENTATION STABILISEE ENTREE: 120/230 V CA SORTIE: 24 V CC/3;8 A

SITOP POWER 10; UNIVERSAL LINE ALIMENTATION STABILISEE ENTREE: 120-230 V CA (110-350 V CC) SORTIE: 24 V CC/10 A DESIGN S7-300

POWER SUPPLY UNIT

CONVERTISSEUR CA/CC AMS E 3X400V(+10:-15%) S 300V(+10/-15 )

FANUC POWER SUPPLY 43 KW INPUT 200V-240V 153A 50HZ/60HZ OUTPUT 283-339 VDC

PHASEO ABL1 - ALIMENTATION À DÉCOUPAGE - MONOPHASÉ - 100..240 V - 24 V - 240 W

INTEGRATED MICROSTEPPING 7 AMP MOTOR DRIVER AND HIGH PERFORMANCE MACHINE PROCESS CONTROLLER MX-CS100-701

ABL6TD63G TRANSFORMATEUR DE TENSION 230 À 400 V 2 X 115 V 63 VA

RELAIS RM4UA33M 220-240 V

APC SMART-UPS SRT 2 200 VA; 230 V

MOVITRAC POWER SUPPLY MDX60 INVERTER 7.5 KW 3 PHASE 380-500VAC

6SE4250-1NA00 - SIMOVERT P SYSTEM INFEED 25 KW; 3 50/60 HZ AC 400 V

ALIMENTATION AC/DC FERMÉE PFC ACTIF; AJUSTABLE; FIXE; 5V; 35A; 12V; 10A; -12V; 6A; 25V; 6A

FANUC PSM 5.5 FANUC ALPHA POWER SUPPLY MODULE

GEC ALSTHOM PARVEX ALIMENTATION DK1822 ENTREE 2PH 400 VAC 50 HZ SORTIE 300 VDC