Power supplies

ALIMENTATION DC; 45KW; 0-48VDC; 0-937A. ENTRÉE; TRIPHASÉE; 3X400VAC. INTERFACE ANALOGIQUE 0-5/0-10V & RS232. PILOTAGE VIA SOFTWARE. FORMAT: 19"X9UX620MM; 99KG.

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 7;5KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 11KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 355 X 140 X 165 (HXLXP); FSC INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

FANUC SERVO AMPLIFIER A06B-6250-H018 INPUT 3 PH 380-480 VAC 50-60 HZ 4A AMP OUTPUT 537-679 VDC 21 KW

AS-INTERFACE COMBINED POWER SUPPLY UNIT IP20;AS-I DC30V; 3.5A; WITH DATA DECOUPLING DC24V; 4.5A (PRIMARY CLOCKING) INPUT VOLTAGE 230V

ALIMENTATION À DÉCOUPAGE INTÉGRÉE 240W; 1 SORTIE À 30V C.C. 8A ENTRÉE 80 A 260VAC

REDRESSEUR MONOPHASE; FILTRE; DC 24V/3A PRI 400V/230V AVEC PRISES +/-15V

CADRE OUVERT CONVERTISSEURS C.A./C.C. (C.A.-C.C.) 1 SORTIE 5V 8A 90 ~ 264 V CA ENTRÉE

ALIMENTATION À DÉCOUPAGE INTÉGRÉE 45.6W; 1 SORTIE À 24V C.C. 1.9A

INVERTER DC/AC 1500W VIN=48VDC; VOUT=230VAC

S26113-E503-V50 - FUJITSU POWER SUPPLY 410W

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 5;5KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 7;5KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 291 X 100 X 165 (HXLXP); FSB INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

ALIMENTATION DE LABORATOIRE RACKABLE 19'' RÉGLABLE PROGRAMMABLE RS-232/RS-485 ENSION D'ENTRÉE : 85-265 VAC |47-63 HZ PLAGE DE TENSION SORTIE : 0 - 20 V/DC PLAGE DE COURANT : 0 - 20 V/DC / 0 - 76 A ENTRÉE 85 - 265 V/AC

The equipment with type Alimentation is manufactured by MURRELEKTRONIK and commercialized under the reference TNG60-220/24.The equipment alternative reference is : TNG6022024. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6SL3210-1NE11-7AG1.The equipment alternative reference is : 6SL32101NE117AG1. This product comes from the SINAMICS G120 range. We guarantee the equipment in all the services offered for 12 months.

ALIMENTATION PHOENIX CONTACT; 24V C.C. 10A; 400V C.A.; 240W; SÉRIE

ALIMENTATION 100/240V CA ; POUR SIMATIC RACK IPC547G

The equipment with type Alimentation is manufactured by LAMBDA and commercialized under the reference CA400 24D_MFU.The equipment alternative reference is : CA40024DMFU. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MURRELEKTRONIK and commercialized under the reference 85095. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by NUM and commercialized under the reference CNCNUM1050. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by _GENERIQUE and commercialized under the reference 1606-XL.The equipment alternative reference is : 1606XL. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by PHOENIX CONTACT and commercialized under the reference QUINT-ORING/24DC/2X10/1X20.The equipment alternative reference is : QUINTORING24DC2X101X20. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MITSUBISHI and commercialized under the reference MDS-DH-CV-300.The equipment alternative reference is : MDSDHCV300. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by AEG and commercialized under the reference 2A 400-495 HFRL3.The equipment alternative reference is : 2A400495HFRL3. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by NEMIC LAMBDA and commercialized under the reference LWD50-0512.The equipment alternative reference is : LWD500512. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by MEAN WELL and commercialized under the reference SD-350D-48.The equipment alternative reference is : SD350D48. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by BOSCH and commercialized under the reference 041261-601.The equipment alternative reference is : 041261601. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by AVERY and commercialized under the reference A8171-06.The equipment alternative reference is : A817106. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by BALDOR and commercialized under the reference BPS10-200-20R.The equipment alternative reference is : BPS1020020R. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

POWER SUPPLY 100A / PEAK 300A / INPUT POWER 30KVA / BLEEDER : PEAK 60KWS CONTINUOUS POWER 2KW

VM SUPPLY MODULES 35 AMP

ABB IRC5 DC-BUS BAR 3HAC17281-3

ALIMENTATION RAIL DIN 20V 10A

ALIMENTATION AUXILIAIRE RACK VARIATEURALIMENTATION 400-460 VAC

CHARGEUR DE BATTERIE PE2169/01 F 12VDC 14 AMP

CARTE ALIMENTATION

SINAMICS ACTIVE LINE MODULE INPUT: 3AC 380-480 V; 50/60HZ OUTPUT: 600 V DC; 60 A; 36 KW INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER AND DRIVE-CLIQ CABLE

SINAMICS ACTIVE LINE MODULE INPUT: 3 AC 380-480 V; 50/60HZ OUTPUT: 600 V DC; 60 A; 36 KW INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER AND DRIVE-CLIQ CABLE WITHOUT UL APPROVAL

SINAMICS ACTIVE LINE MODULE INPUT: 3 AC 380-480 V; 50/60HZ OUTPUT: 600 V DC; 200 A; 120 KW INTERNAL AIR COOLING INCL. CONTROL VOLTAGE ADAPTER AND DRIVE-CLIQ CABLE

6SL3130-7TE25-5AA0 SINAMICS S120 ACTIVE LINE MODULE ENTRÉE: 3AC 380-480V; 50/60HZ SORTIE: 600V CC; 92A; 55 KW REFROIDISSEMENT INTERNE PAR AIR Y COMPRIS CONTROL VOLTAGE ADAPTER ET CÂBLE DRIVE-CLIQ SANS HOMOLOGATION UL

SINAMICS S120 ACTIVE LINE MODULE INPUT: 3AC 380-480V; 50/60HZ OUTPUT: DC 600V; 133A; 80KW FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING INCL. DRIVE-CLIQ CABLE

6SL3130-7TE22-5AA3

3-PH MAINS CHOKE F. U-CONVERTER 224A; FOR 480V 60HZ/400V 50HZ VOLTAGE DROP 5;31V AT 60HZ

SINGLE-PHASE TRANSFORMER CONTROL TRANSFORMER VDE/CSA/UL 0.250KVA MULTI-VOLTAGE VERSION PRI 550-525-500-480-460-440 415-400-380-240-220V MULTI-VOLTAGE VERSION SECONDARY VOLTAGE 2X110V IP00 IP00

SUPPLY DIODE MODULE

POWER SUPPLY MODULE FOR SERVO SYSTEM

MODULE D ALIMENTATION 6SN1145-1BA02-0BA1

SIMODRIVE 611-A/D INFEED/REGEN.FEEDBACK MODULE; 55/71 KW; REGULATED

HDS SERVO DRIVE CONTROLLER LINE:04; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 200A; OTHER VERSIONS: NONE; CONTROLLER FAMILY: DIAX04

380V TRANSFORMATOR

HDS SERVO DRIVE CONTROLLER LINE:04; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 200A; OTHER VERSIONS: NONE; CONTROLLER FAMILY: DIAX04; SERCOS INTERFACE; FUNCTION ID CODE: 32; VERSION OF FUNCTION ID: 01;FIRMWARE: MUST BE ORD

SINAMICS G120D POWER MODULE PM250D WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 5;5KW FOR 200% 3S;150% 60S;100% 300S AMBIENT TEMP -10 TO 40 DEG C 210 X 450 X 220 (HXWXD); FSC PROTECTION IP65 WITHOUT CONTROL UNIT

TRIO-PS/3AC/24DC/5 PRIMARY SWITCHED POWER SUPPLY; INPUT: 3-PHASE; OUTPUT: 24VDC/5A; DIN RAIL REF 2866462

TVM 102-50-220/300-W0-220/380 TVM SUPPLY MODULE

HDS SERVO DRIVE CONTROLLER LINE:04; VERSION:2; COOLING: AIR INTERNAL (WITH BUILT-IN BLOWER; RATED CURRENT: 200A; OTHER VERSIONS: NONE; CONTROLLER FAMILY: DIAX04; SERCOS INTERFACE; FUNCTION ID CODE: 32; VERSION OF FUNCTION ID: 01;FIRMWARE: MUST BE ORD

POWER SUPPLY

ALIMENTATION RAIL DIN AC/DC (PSU); 1 SORTIE; 960 W; 24 VDC; 40 A

POWER SUPPLY MODUL TVD1.3 7.5 KW INPUT 3 X AC 380...480VAC 50-60 HZ

ENCODER CABLE SINCOS SH TO MC4 UL 50;0

DISJONCTEUR COMPACT NS1000N MICROLOGIC 2.0 1000 A 3P 3D

SCHNEIDER ELECTRIC EMS58581BA BACKUP POWER SUPPLY PS 100-48 V

M E230 G24/25 B50-FP (AC POWER SUPPLY) FOR LEAD BATTERY 24V 25A CHARGING CURRENT HI 1.5 KW 24VDC

ALIMENTATION CONNECT POWER DE TYPE CP SNT 250W 24V 10A

ALIMENTATION SUR MACHINE BOBST K260212-200/AE

30KW MODULES D’ALIMENTATION POWER SUPPLY

POWER SUPPLY UNIT 18KW 3 X 230VAC IN 60A

WEIR ALIMENTATION 200 W

HMV POWER SUPPLY UNIT VERSION:01; DESIGN:1; POWER SUPPLY: REGENERATIVE; COOLING MODE: AIR; INTERNAL (THROUGH INTEGRATED BLOWER); RATED OUTPUT: 45KW; PROTECTION MODE: IP 20; DC-BUS NOMINAL VOLTAGE: DC 700V

SPINDLE DRIVE UNIT 11 KW

PHASEO - ALIM. EN MODE COMMUTATION RÉGULÉ - MONO/BIPHASÉ - 100..240VCA- 24V 2;5A

MPS POWER SUPPLY 3-PHASE; IN: 340-460VAC OUT: 22-28VDC 20 AMP

PACDRIVE PS-5 POWER SUPPLY ISH VPM02D20AA22

ALIMENTATION D'AUTOMATE DE SÉCURITÉ PREVENTA COMPACT

CARTE D'ALIMENTATION AFLFEE KFS0041B

POWER SUPPLIES ABL8WPS24400 REGULATED SMPS - 3-PHASE - 380..500 V - 24 V - 40 A

HILBERLING HN5001 H POWER SUPPLY / BOOSTER 330 V 20 A BOOSTING VOLTAGE 1800 V

PHASEO - ALIM. EN MODE COMMUTATION RÉGULÉ - MONO/BIPHASÉ 100..240VCA - 5V 4A

POWER SUPPLY SERVO POWER CONVERTER POWER SUPPLY UNIT 26 KW 95 AMP AC CONVERTER/POWER SUPPLY 3 PHASE 200-230 VAC 50/60 HZ

SDCSPOW1 POWER SUPPLY BOARD PRODUCT ID: 10012279

YASKAWA INVERTER 3PHASE OUT-3X400V 0.2KW 1.2A - CIMR-JC4A0001BAA

POWER SUPPLY 10AMP 120/240VAC IN 24VDC OUT

SIMOVERT MASTERDRIVES VECTOR CONTROL CONVERTER UNIT CABINET UNIT; IP20 3AC 380-480V; 50/60HZ; 146A NOMINAL POWER RATING: 75KW WITHOUT REGENERATIVE FEEDBACK 6PULSE INCOMING SUPPLY

SIMODRIVE 611 INFEED/REGENERATIVE FEEDBACK MODULE; 36/47 KW REGULATED; EXTERNAL COOLING; MAINS PROTECTION WITH NC CONTACT

BUG20 SERVO POWER SUPPLY UNIT INPUT 3X220VAC OUTPUT 300 VDC 60A;

ALIMENTATION A DECOUPAGE 24V 10A

DIGITAL AXIS CONTROL CONTROLLER; 2A EFFECTIVE; FOR SYNCHRONOUS MOTORS WITH RESOLVER INTERFACE INPUT 600VDC OUTPUT 400 VAC

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V 10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 110KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO 50 DEG C OUTPUT LIGHT OVERLOAD: 132KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO 40 DEG C 634 X 350 X 316 (HXWXD); FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

MITSUBISHI MDS-B-CV-260 POWER SUPPLY UNIT 115A

POWER SUPPLY NUM MDLL1008Q00 400V 8KW T2

POWER SUPPLY; PHASES:1; PN(KW):0;144; UPRI(V):230; USEC(V DC):24; ISEC(A DC):6; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; PROTECTION CL.:I; TA/ISOKL:55 /B; W(%):3; IP00; TYPE OF TERMINALS:SCREW/TAB CONNECTION; INSTALLATION:SCREW; EN 61558 EN61131-2 >SAFETY ISOLATING TRANSFORMER<

ALIMENTATION STABILISÉE À DÉCOUPAGE TRIPHASÉE - 3X400V/24 V= - 240 W - 10 A

PHASEO - TRANSFORMATEUR DE TENSION - 230..400V - 1X230V - 2500VA - ABL6TS250U ; PUISSANCE NOMINALE EN VA : 2500 VA

PHILIPS POWER SUPPLY PE4152/01 700VA INPUT 110-220VAC 50-60 HZ OUTPUT 24VDC 12.5 AMP

SIMODRIVE 611 INFEED/REGENERATIVE FEEDBACK MODULE 16/21 KW; STABILIZED; WITH INTERNAL COOLING; MAINS CONTACTOR WITH BREAK CONTACT

ALIMENTATION REDRESSÉE FILTRÉE MONOPHASÉE 230-400 / 24V 20A

ALIMENTATION REDRESSÉE FILTRÉE MONOPHASÉE 230-400 / 24V 5A